Nice motor cant beat the condition of that one. Bill years ago my friend bought one of those brandnew mid 1960S we rolled to his home in a shopping cart,LOLL...... Glenn
Alright alright I subscribed for ya... I got the Evinrude 33hp skitwin same year 1966. It’s gonna power my 1969 Barracuda hydrocycle, I got a video on my channel for the ‘cuda, just got it hopefully be done by next summer. Just got the motor buttoned up after almost a complete overhaul, did the gear case seals, water pump, changed from long to short shaft, carb kit, new points and coils, retapped several stripped bolt holes, and more I can’t remember...
Thanks for the explainations! I worked with few engines of that years and these kinds of informations are always usefull. Actually i am restoring the same engine. After i restarted end setted the carburettor, i saw an other problem: at minimum rotation It over heats up to 230°F, It take ten minutes but increase, but just i insert the Gear even without accelerate, the temperatur drop quikly at 100°F. At maximum Power the same hottest parts of Power head mantain among 158/170°F. May be It normal than at low rotation without Gear in, It over heats?
You probably did to the coil what I did last year on my 33 I did..Ran the puller bolts too far in and I nicked both coils.Lucky to find one with a tiller. Looks like an add on.I searched for a tiller for mine. Sold it .
Hello Bill, I just inherited a Johnson Super See Horse motor and boat. The motor was last started in 2016. I am trying to find someone see if they can get it running again. Can you provide any guidance?
I subscribed to your channel, I have a Johnson 33hp with a stripped spark plug & I need a bolt/bolts for the fly wheel. Hopefully I’ll luck into a solid running motor. Keep up the solid contact BUT I suggest you spring for a mic you can clip to your shirt, makes a world of difference
THANK YOU MY MAN FOR THE SUB!! So with the spark plug I used a heli coil kit in another video i can link you! or you can just change out the head! And I actually have a lapel MIC but my camera doesn't have a jack so I'm looking into getting a recorder!! But awesome TIP and THANK YOU!!
I don’t know if anyone else experiences this, but when I watch your videos I try to put it in full screen and put my phone in landscape I can barley hear you.
OK I FIXED IT!! go to you iphone settings. then click accessability, then scroll down to audi/visual, Turn on mono audio! Mine was off and this fixed it!
Hey again Bill! Any way to dm you? I bought a parts 33hp long shaft that I’ll be removing for a short shaft. I’m in Canada but those boarders will reopen someday! On twitter I’m @robbiebaseball1 Also, can’t get mine to start but I think it’s carb/fuel pump related. $100 motor rebuild!!
There isnt really a way to DM me but feel free to comment on any video! I usually see all of them and respond to every one! so any questions on your project just hit me up here!!
Ok, here’s my issue. She turns but won’t catch. Fuel is getting to the carb because it’s leaking out a bit. Do I need a carb rebuild kit or could it be another issue? Thanks!
@@Moparfest_Robbie if fuel is leaking out of the carb when you push the primer bulb you have a bad needle or needle seat. You need to take the carb apart then install a new kit!. Next check compression and make sure you have spark
We had a 1968 and easily skied one, almost got two up behind it, amazingly torquey engines :)
this one was cool and fun to work on!
Nice motor cant beat the condition of that one. Bill years ago my friend bought one of those brandnew mid 1960S we rolled to his home in a shopping cart,LOLL...... Glenn
hahah hell yeah!!
is the evinrude in the background a 33 hp ski twin ?
i have a 65 showroom sample that m trying to fire up.
the blue on in the background is a 25hp fastwin i believe.
It turns over quite nicely *has a plug out* lol
omg!! lol NEVER noticed that! nice catch my man!
Love the videos keep posting I have one request can you make some of you out in the water
yes!! Im always trying to get on the water... problem is with work and kids I just don't get that many days off! BUT I WILL TRY ASAP!!!
as a matter of fact I have a video of me on the water that I will upload next Thanks to this comment!! STAY TUNED!!
Alright alright I subscribed for ya...
I got the Evinrude 33hp skitwin same year 1966.
It’s gonna power my 1969 Barracuda hydrocycle, I got a video on my channel for the ‘cuda, just got it hopefully be done by next summer.
Just got the motor buttoned up after almost a complete overhaul, did the gear case seals, water pump, changed from long to short shaft, carb kit, new points and coils, retapped several stripped bolt holes, and more I can’t remember...
Sweet project!! And thanks my man for the sub!!!
Thanks for the explainations! I worked with few engines of that years and these kinds of informations are always usefull. Actually i am restoring the same engine.
After i restarted end setted the carburettor, i saw an other problem: at minimum rotation It over heats up to 230°F, It take ten minutes but increase, but just i insert the Gear even without accelerate, the temperatur drop quikly at 100°F.
At maximum Power the same hottest parts of Power head mantain among 158/170°F.
May be It normal than at low rotation without Gear in, It over heats?
im just assuming here that maybe it just doesnt pump water that fast and may cool better at higher revs?
and thanks for the love my guy!!
You probably did to the coil what I did last year on my 33 I did..Ran the puller bolts too far in and I nicked both coils.Lucky to find one with a tiller. Looks like an add on.I searched for a tiller for mine. Sold it .
I actually didn’t go in far enough!! Lol the bolt pulled out the threads and I had to reTap the hole!! Oops
Hello Bill, I just inherited a Johnson Super See Horse motor and boat. The motor was last started in 2016. I am trying to find someone see if they can get it running again. Can you provide any guidance?
Absolutly!! There are a ton of videos to help you get the ignition set up, and water pump kits are everywhere. Let me know how I can help!
@@BlackoutBilll21 Hello Bill, I am looking for someone to service the motor. I am in the North Carolina/South Carolina area.
@@tedpauling6050 I would but Im in New jersey lol It would cost you a TON to have it shipped to me
What would a long shaft and short shaft we used for?
I need a long shaft for this boat! Unfortunately all my big motors are short shafts and don't put my boat on plane
BlackoutBill21 is it for sale?
@@TheAdventureLog No, I fixed it for a friend. He took it out on the water today and hopefully sends me a video of it on the water
Put a manual jack plate on the boat so you can lower the motor 5 inches.
I subscribed to your channel, I have a Johnson 33hp with a stripped spark plug & I need a bolt/bolts for the fly wheel. Hopefully I’ll luck into a solid running motor. Keep up the solid contact BUT I suggest you spring for a mic you can clip to your shirt, makes a world of difference
THANK YOU MY MAN FOR THE SUB!! So with the spark plug I used a heli coil kit in another video i can link you! or you can just change out the head! And I actually have a lapel MIC but my camera doesn't have a jack so I'm looking into getting a recorder!! But awesome TIP and THANK YOU!!
th-cam.com/video/Iu4oZSUNydo/w-d-xo.html
should be the same type of motor!
I don’t know if anyone else experiences this, but when I watch your videos I try to put it in full screen and put my phone in landscape I can barley hear you.
This happened to me on my IPHONE! do you have an iphone??
BlackoutBill21 yes I do.
Seth Gabbard crap! I was afraid of this. My iPhone does the same thing... any android users having this issue??
OK I FIXED IT!! go to you iphone settings. then click accessability, then scroll down to audi/visual, Turn on mono audio! Mine was off and this fixed it!
BlackoutBill21 thank you! Always enjoy the videos. So everyone knows maybe put it in the video. Thanks for the help! And glad you got her running
Hey again Bill! Any way to dm you? I bought a parts 33hp long shaft that I’ll be removing for a short shaft. I’m in Canada but those boarders will reopen someday! On twitter I’m @robbiebaseball1
Also, can’t get mine to start but I think it’s carb/fuel pump related. $100 motor rebuild!!
There isnt really a way to DM me but feel free to comment on any video! I usually see all of them and respond to every one! so any questions on your project just hit me up here!!
Ok, here’s my issue. She turns but won’t catch. Fuel is getting to the carb because it’s leaking out a bit. Do I need a carb rebuild kit or could it be another issue? Thanks!
@@Moparfest_Robbie if fuel is leaking out of the carb when you push the primer bulb you have a bad needle or needle seat. You need to take the carb apart then install a new kit!. Next check compression and make sure you have spark
Begging for viewers sucks. Content gets it done. See ya.
Im not begging for viewers... SUBS!!! lmao! THAT IM BEGGIN FOR!!! hahaha And I like my content so pfffffttttt lol Thanks for the comment!