I also just got myself a Pro Mk3. What a BEAST!!! Great setup and I cannot wait til i finally found time to finish my install and tune. Thanks for always providing such interesting content
Congrats on the new Helix Nerijus. You’re a lucky man and you’re gonna love it. I run a Helix DSP 3s which is exactly the same as the pro mk3 minus two output channels and no virtual channels I believe. I also use the Conductor. One thing about the Conductor is you can choose to control from several different things but you can only choose four. If there’s a way to control more than four things I haven’t figured it out yet. Also the auto eq function on the Helix works very nice but you can get it a lot better with REW. And the import function for the REW eq files is a God send. It saves so much time. You can also import your target curves from Jazzy and Erica’s tuning companion directly into the auto eq. One last thing, if you’re using digital input you can’t use global input eq. It only works on analog inputs. Again I may be wrong on that but I can’t figure out how to do it. I’m very much looking forward to your review of the Helix. I’m sure you’ll discover some things I haven’t found yet.
I would be very interested to see how the Helix measures with the Focusrite setup. I realize it has it's weaknesses but I'm very curious to know if that actually had any impact on any of the previous test results, however insignificant they may seem on "paper".. Also, /////Alpine vs. Helix. Thats a hard decision LoL
Would love to learn more about Helix Software. I purchased a pre-owned Helix M Four Dsp amp which also got VCP, SFX etc and i don't know how to use them 😅.
BT 5.0 cannot support 24-bit 96 kHz audio. I like how they offer it separately because I don’t want to pay extra for something I won’t necessarily use.
dang.. wished you can take a peek inside lol. hope the next gen BT module will support LDAC cuz yeah.. why not?. would be great if it supports more codec
I have seen many people having their car speakers connected in mono (both left and right doors speakers connected to the same mono amp). But how to do when my car stereo has left and right channels? Do i need a dsp or what?
I believe you are referring to our beloved bassheads. In order to use multiple speakers per door and use a massive amplifier, they might use it in mono. In SQ we use a stereo signal and have multiple amplification channels. In a simplest setup a 2 Ch or a 4ch amplifier will Do.
Nice. When I started building my system a few years ago I wanted a Helix but buying one in NZ was too difficult as there isn't a dealer here as far as I know. I maybe could have got one from Ausy. I ended up with a minidsp 8x12dl, I really like it but have nothing to compare it to. My wife has a new car on order so maybe that one will get a helix. I should really investigate the dealer side of things in NZ as I'm an auto sparky and we install a lot of systems, most of them are bottom of the barrel though 😂
M new here, can someone help me understand is this also a amplifier + dsp or I need to purchase a separate amplifier and processor for a 3way front active & rear 2 way
I have a Helix DSP Ultra with a conductor. No idea how to use it. I find some parts of the software to advance for me. I just had my installer install and tune. So I’ve subbed hoping to learn some more.
Congratulations. I don't know if it's good or bad. I have known and followed lots of guys who have gotten free stuff from different types of companies and not give proper reviews because of that. I'm not saying you but time will tell. WHO IN THIS WORLD WOULDN'T LIKE FREE STUFF AND DISCOUNTS? I only hope that you give real reviews and not just for the freebies.
I also just got myself a Pro Mk3. What a BEAST!!! Great setup and I cannot wait til i finally found time to finish my install and tune. Thanks for always providing such interesting content
Congrats on the new Helix Nerijus. You’re a lucky man and you’re gonna love it. I run a Helix DSP 3s which is exactly the same as the pro mk3 minus two output channels and no virtual channels I believe. I also use the Conductor. One thing about the Conductor is you can choose to control from several different things but you can only choose four. If there’s a way to control more than four things I haven’t figured it out yet.
Also the auto eq function on the Helix works very nice but you can get it a lot better with REW. And the import function for the REW eq files is a God send. It saves so much time. You can also import your target curves from Jazzy and Erica’s tuning companion directly into the auto eq.
One last thing, if you’re using digital input you can’t use global input eq. It only works on analog inputs. Again I may be wrong on that but I can’t figure out how to do it. I’m very much looking forward to your review of the Helix. I’m sure you’ll discover some things I haven’t found yet.
Oh mate that is awesome! Love knowing you hard work is paying off :)
Can't wait for the upcoming videos about these beauties. I'm excited !
Congratulations you are moving on up!!!
It's good to see you progress 👍
Looking forward for auto eq setup with this new MK3 and new software.
That is so awesome man! Love the video.
this device is so amazing!!!
I appreciate had thorough you are
Wow my dream DSP but I can’t afford it 😅 if I had this I can use it to perform rear fill function which is awesome.
Congratulations 🎉
Can you ask Julian if there’s going to be a v8 dsp mk3 with the instant source switching? It’s the one thing stopping me buying one!
So now you have to go with Helix :)
I am running DSP Pro Mk3 with 2x Alpine X A70f and PDX M12 :) similar to you :)
I would be very interested to see how the Helix measures with the Focusrite setup. I realize it has it's weaknesses but I'm very curious to know if that actually had any impact on any of the previous test results, however insignificant they may seem on "paper"..
Also, /////Alpine vs. Helix. Thats a hard decision LoL
I might try, but I think this DSP will measure better than the focusrite😅
Would love to learn more about Helix Software. I purchased a pre-owned Helix M Four Dsp amp which also got VCP, SFX etc and i don't know how to use them 😅.
BT 5.0 cannot support 24-bit 96 kHz audio. I like how they offer it separately because I don’t want to pay extra for something I won’t necessarily use.
dang.. wished you can take a peek inside lol. hope the next gen BT module will support LDAC cuz yeah.. why not?. would be great if it supports more codec
I can send you some pictures later today😉
@@RAW-CAt great!. i'd be happy to see the inside
I’m running the MK3 and I love it!
Really looking FW to measurments on this one, also coax / optical.
I have seen many people having their car speakers connected in mono (both left and right doors speakers connected to the same mono amp). But how to do when my car stereo has left and right channels? Do i need a dsp or what?
I believe you are referring to our beloved bassheads. In order to use multiple speakers per door and use a massive amplifier, they might use it in mono. In SQ we use a stereo signal and have multiple amplification channels. In a simplest setup a 2 Ch or a 4ch amplifier will Do.
Nice. When I started building my system a few years ago I wanted a Helix but buying one in NZ was too difficult as there isn't a dealer here as far as I know. I maybe could have got one from Ausy.
I ended up with a minidsp 8x12dl, I really like it but have nothing to compare it to.
My wife has a new car on order so maybe that one will get a helix.
I should really investigate the dealer side of things in NZ as I'm an auto sparky and we install a lot of systems, most of them are bottom of the barrel though 😂
Might want to reach out to Audiotec Fischer directly and ask them for the nearest distributor🤔
hello, i have helix DSP.2
and i cant find HEC HD BT for my DSP in my country.
can i use the HEC HD BT for DSP mini?
Yes, it will work. Face plate will be different though
M new here, can someone help me understand is this also a amplifier + dsp or I need to purchase a separate amplifier and processor for a 3way front active & rear 2 way
This specific model is a discrete DSP. If you are looking for a DSP with buil.tin amplifier, look at M six DSP or V eight models.
New toys!
Why does it look exactly like the Recoil dsp?
Which one?
Is the Bluetooth for connecting to the laptop as well wirelessly?
Cheers
I believe you can use BT connection for tuning, but I wouldn't. I prefer to have a stable wired connection.
I have a Helix DSP Ultra with a conductor. No idea how to use it. I find some parts of the software to advance for me. I just had my installer install and tune. So I’ve subbed hoping to learn some more.
I have a full tutorial on Helix DSP software just for you😉
Good morning all, if you like these videos *PLEASE HIT THE LIKE BUTTON!!*....Let's grow this channel.
Well, now you need to get ahold of a MiniDSP 8x12
did they stopped providing kits?. i remember they're selling module only a few years back but now i cant find them on their site
Anyone know a reputable website I can order this from
What country are you from?
@RAW-CAt United states only place that I can find is ebay the listed distributors on their main website only has the specs
Vintage usb socket
🔥👍
Congratulations. I don't know if it's good or bad. I have known and followed lots of guys who have gotten free stuff from different types of companies and not give proper reviews because of that. I'm not saying you but time will tell. WHO IN THIS WORLD WOULDN'T LIKE FREE STUFF AND DISCOUNTS? I only hope that you give real reviews and not just for the freebies.
Not sure if you watched any of my reviews🤔 Didn't see anyone in car audio dig so deep as I do..
If you have any comments or advice on how to do things better, I am open to feedback😊
@@RAW-CAtlatest version of 5 is very hot advance input analyser is new
In Auto Rta measurements control is new
Plz download newest version and make a full video