I just can't get over how something looks so complicated to me then you say " it will be fine " and then you go and do something amazing like this ! Great job Brent totally digging how this build is turning out !
Brent you did an awesome job on that tunnel and the floor looks' great ! A big thank you for your video(s) and it's great contents, it''s always a moment that I'm waiting for ! Have a good week, greeting to Esther
Brent is one patient dude. I'd have ripped that wire out the car and thrown it as far as I could after the 900th time it got in my way. He just kept right on working around it.
You never cease to amaze me, Brent. What a great outcome. Love ya work Mate. I see you often wear your Afro Blond Aussie hat, hope you liked that. Cheers Billy J..... Queensland, Australia.
This Studamino should deserve a nice paint job by the time it's done, as a tribute to your wizardry. I think it's one of the coolest hot rods I've seen in a long time.
You are quite the metal man! I know metal fabrication and you are one of the best if not the best! I believe one of the reasons is those long cold Canadian winters gives you a lot of time to practice!
Brent - on that brake linkage, you might consider moving the whole dash back a few inches. It's easy to do, would give you more room, and will also help simplify other under-dash activities. Looks good, too. Just an idea.
Man, that floor looks so good. I'm always impressed with your skills. It's hard to believe how nice it looks from what you had to start with. Keep up the good work!
Man you have some serious metal fabrications skillz, You make this stuff look easy. Even though I'm positive it's not lol. That floor looks better than most I have seen from most factories. Well done sir!
Looking awesome Brent the floor is going to be covered up anyways. I guess you know for anyone else wouldn't know what all you done they'll just know it's a one of kustom.
The four upper pieces that come down from the firewall to the back of the transmission look like the arm on a suit of armor. It's pretty friggin badass! 👍
Brent....I just threw this together with a couple of eye balled bead rolls, I got lucky, its not very nice. Me.....The nicest sheet metal work I have ever seen !!
Love the shop Brent! If I was set up like that I would crank the heat, stock the frig for the next 5 months and not leave til April! The perfect winter!😎
Looks like a nice fun project. But I have to say your music choices are just fantastic. It perfectly sets the mood and really enhances the drama and is a nice departure from the standard auto show knock off metal or skynyrd - where the songs sound familiar but are changed enough to protect a channel from art licensing issues. The other day you had a soundtrack of wonderful New Orleans style jazz that set the tone of the scene - mellow yet upbeat that was just warm and classy. Which somehow worked considering your working with thrown away materials on a continuation of a 60 year old project on a 75 year old oddball car. Well done sir. Keep up the good work!
In my mind that's so freaking tough, what's so Kool is you already see the finish product. that's so Kool, no matter what changes that are involved You Do IT!!! So KOOL!!!...
My favorite part of your videos is watching you work magic with the metal .
You are a wizard when it comes to shaping steel free hand 👍🏼👍🏼👍🏼
As always, fascinating watching you build a puzzle and make it look factory when you're done
I just can't get over how something looks so complicated to me then you say " it will be fine " and then you go and do something amazing like this ! Great job Brent totally digging how this build is turning out !
Brent is a Master with the metal work.
As always great job Brent!
You know things are getting serious when Brent brings out the Miller Lite and the Coors boxes for a template.
LOL it always depends what somebody brings
Brent you did an awesome job on that tunnel and the floor looks' great ! A big thank you for your video(s) and it's great contents, it''s always a moment that I'm waiting for ! Have a good week, greeting to Esther
Beads give the floors a nice, finished look; almost too nice to cover up! Well done!
This Camino gonna look awesome :) great job !!
Awesome job on the floors and tunnel. I love watching your videos. Thanks Brent
It's starting to look good
Brent is one patient dude. I'd have ripped that wire out the car and thrown it as far as I could after the 900th time it got in my way. He just kept right on working around it.
I have an excellent idea - when you're finished, you could do a giveaway ... to me. Excellent work; it's already a beauty.
Brent, I think you should get Miller Lite for a sponsor! 😊👍
Says to wife, Honey, just off to the store to buy some cardboard for templates. Comes back with a case of Beer😂😂😂
You never cease to amaze me, Brent. What a great outcome. Love ya work Mate. I see you often wear your Afro Blond Aussie hat, hope you liked that. Cheers Billy J..... Queensland, Australia.
Yeah man little chilly out now though for it haha
i love metal work
Nice job Brent!
This Studamino should deserve a nice paint job by the time it's done, as a tribute to your wizardry. I think it's one of the coolest hot rods I've seen in a long time.
Master Brent love your video ❤
You are truly amazing Brent! Awesome Job!
You are so good at making sheet metal do what you want it to do, Hump looks fantastic.
Great looking floor pan. That is going to be one great looking truck when done.
Brent I would be happy with the turnout also. Really enjoy watching you fabricate.
Dang Brent, you made that tunnel look easy breezy
You are quite the metal man! I know metal fabrication and you are one of the best if not the best! I believe one of the reasons is those long cold Canadian winters gives you a lot of time to practice!
The tunnel really came together very well. Great job Brent!
Brent your a genius 😊
Nice job on the tunnel for the driveshaft looks great…
A couple access panels for those bell housing bolts and all set, haha! Came out great!
Great job on the floors!
Nice work Brent !
Another really good one Brent. The video is just right as is the music.
Well you killed the floor Buddy, it looks great. No Halfass around here! Dennis
Looking Great Brent Truck is coming along just fine!
The whole floor looks awesome.
remember to paint the metal befor you put seam sealer on it lookin good brent
Well Done Brent , 100 % .....
Fastest 40 minutes of Saturday night. That tunnel turned out mint!!
Hello Brent, tunnel is looking good. Enjoy your weekend, see you next time. Take care 👍
We are using up a lot of beer cases. Nice going, Brent
Good video
Making length by width by flair isn't as easy as it looks when Brent does it. ❤❤❤❤❤
The floors and tunnel build are looking pretty sweet! Take care Brent.
Wow that was quick, nice job 👍
That tunnel looks great!
Brent - on that brake linkage, you might consider moving the whole dash back a few inches. It's easy to do, would give you more room, and will also help simplify other under-dash activities. Looks good, too. Just an idea.
The floor looks awesome. Great job.
Sure did a good job on that floor 👍
Man, that floor looks so good. I'm always impressed with your skills. It's hard to believe how nice it looks from what you had to start with. Keep up the good work!
You sir are one clever bloke all the best from 🇬🇧👍🏻
Damn Brent. You make that sheet metal work look so easy!!!! You sure you were not a Tin Basher in a previous life???? lol
This may be my favorite episode ever! I love that gas cylinder metal bender!
Man you have some serious metal fabrications skillz, You make this stuff look easy. Even though I'm positive it's not lol. That floor looks better than most I have seen from most factories. Well done sir!
Great job Brent. Always enjoy watching you fabricate
Have the beer companies ever known about the amount of free advertising that they are getting? I think you have found a sponsor for the channel.
Looking awesome Brent the floor is going to be covered up anyways. I guess you know for anyone else wouldn't know what all you done they'll just know it's a one of kustom.
Karl is rubbing off , good job Brent, neat and tidy work.
Great tunnel /floor construction Brent!
The tunnel looks absolutely awesome. You made it look so easy once again. Thank you for a great video. Look forward to seeing many more.❤👍👍👍👍👍
Brent your flooring looks great well done once again. You are appreciated keep on wrenching and take care.
That tunnel came together really nicely. Especially for just winging it together.
Looks really nice Brent Coming along well
Great job on the floor .. 🍺🍺
Again nice work, you make it look easy Brent 👍🏻
Bucket seats and a nice console.
You are a true craftsman. Im so impressed with your work. You make things look so easy.
If it was easy everyone would be doing it. Nice work!!!!
Did a great job on the floor
Nice looking floor Brother
I love your sense of humor....
Been doing some catching up on your videos Brent.
You sure do have a nice shop that seems to be working for you now. I’m impressed. Good shows.!!
The four upper pieces that come down from the firewall to the back of the transmission look like the arm on a suit of armor. It's pretty friggin badass! 👍
good work buddy
The floor and tunnel look great. I trust there is enough room to connect the shift levers and any required maintenance on the Transmission.
Nice work Brent. Maybe a bit tight on the cooler lines at the trans end. 🇦🇺🇦🇺
Your fabrication of the tunnel pieces, taught me a great amount. Impressive work.
Brent....I just threw this together with a couple of eye balled bead rolls, I got lucky, its not very nice.
Me.....The nicest sheet metal work I have ever seen !!
floor looking great
Really impressed with the freehand bead rolling. It looked amazing. Loved cardboard aided design.
Early Sunday morning here in Africa. Off to workshop to make my tunnel. Thanks for the motivation Brent.
The metal mizer at work
Thanks for sharing 😀👍
Looking good 👍👍
As always Brent you never cease to amaze me with your talents. Really like the tunnel. Hope you had a great Thanksgiving.
Бреет мастер на все-руки 👍👍👍👍👍BrEnT Master ha vse-ruki
U make that look so easy. I really like this build. It looks great.
Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤
Well I read all comments, and no one noticed that you fabricated and installed half of the driveshaft tunnel FROM OUTSIDE THE VEHICLE! Good vid
You’re a wizard with metal shaping always a fantastic job
Love the shop Brent! If I was set up like that I would crank the heat, stock the frig for the next 5 months and not leave til April! The perfect winter!😎
A work of art! 😊
Looks like a nice fun project. But I have to say your music choices are just fantastic. It perfectly sets the mood and really enhances the drama and is a nice departure from the standard auto show knock off metal or skynyrd - where the songs sound familiar but are changed enough to protect a channel from art licensing issues. The other day you had a soundtrack of wonderful New Orleans style jazz that set the tone of the scene - mellow yet upbeat that was just warm and classy. Which somehow worked considering your working with thrown away materials on a continuation of a 60 year old project on a 75 year old oddball car. Well done sir. Keep up the good work!
In my mind that's so freaking tough, what's so Kool is you already see the finish product. that's so Kool, no matter what changes that are involved You Do IT!!! So KOOL!!!...
Beautiful work on the tunnel! I would have burned more holes than welded.😂 👍
Looks great Brent
ALRIGHTY THEN!! Back to the old Studebaker….. 👍. Those floors are fantastic.
Awesome floor!!!! Anyone who don't like that never did a floor before! Great show bud see you next time.
Great job 👍
Great job on the tranny tunnel .Love the shape and trim, shape and trim method. Looks really nice. Be safe and stay well.