Bravo my brother, I'm going to try and build my own. I upgraded my magic clip with the Stylecraft stretch bracket and all but never from scratch. You gave me the push I needed to try. Thank you
Thank you for the video. I just built a wahl magic clip same like yours but in a transparent blue shell and using a wahl balding blade and blade slide. Technically a wahl balding cordless 😊
Very cool. I would love to find a small soldering pencil like that one. I have a good soldering iron but plugging it in is not always convenient, especially for small wires like this.
I wonder if you could used the Gamma super torque motor instead, and use the Tomb45 battery. Heard those two are compatible with wahl clips. Get the 4 hole stretch bracket and slap an andis master blade on it with some andis screws. Make sure to get the cam follower to use the andis cutting blade on a magic clip too. Damn the possibilities
Can you build another one but different color and where did you get the magnet from the machine I've been trying to find the magnet to build a magic clip but I've looked everywhere and they don't have the magnet on top that stabilizes
hi man i see your video some days ago and i try the same clear case tomb 45 battery S/C blade and the motor but one question i need to get the motherboard for the motor or i can use the same one
@@edounboxingofficial thanks for replying. Its a super taper / designer of Wahl's based clipper probably based on same motor. This or other that look alike Wahl clipper. You build a nice project though 🙂
I havent gotten mine in. But biting the bulledt and upgrsding my battery after 4-5 years. To tomb 45 battery. Seen people day it overhests a bit. But adding a cermamic moving blade. Oil. Spray. And cleaning your took from hair. Should be more then enough to keep it mid. I just got myself a gamma fusio. Blade which is a really grest investment. Overall slowly but surly making my msgic clips into a beast. If they came out with the silver edition when i got my firdt clipper. Trust me thst would obertske any of the clippers i have fr😂💯 its a very meaning ful clipper to me. Down to road ill get it customised.
Oh ok. I hope I didn't spoil your show 😁. And the motor moving really fast bro. There was 6500rpm and 7200rpm, so I took the 7200rpm. And thanks again for your advice
It's still just a little bit cheaper but you get a higher rpm and you can find a longer lasting battery. The power on the magic clip is trash and the battery life is less than an hour and a half. With the right motor and battery you get up to 3 or so hours with more power.
Kudos!I will follow you lead and build oneofr my shop. Can you send me the link to the portable solder? Thanks a lot. Once am done I will send you the link to see the process. 🙏
Bravo my brother, I'm going to try and build my own. I upgraded my magic clip with the Stylecraft stretch bracket and all but never from scratch. You gave me the push I needed to try. Thank you
Thank you for the video. I just built a wahl magic clip same like yours but in a transparent blue shell and using a wahl balding blade and blade slide. Technically a wahl balding cordless 😊
Very cool. I would love to find a small soldering pencil like that one. I have a good soldering iron but plugging it in is not always convenient, especially for small wires like this.
My brother you did your thang with this one !
Thnx bro
I wonder if you could used the Gamma super torque motor instead, and use the Tomb45 battery. Heard those two are compatible with wahl clips. Get the 4 hole stretch bracket and slap an andis master blade on it with some andis screws. Make sure to get the cam follower to use the andis cutting blade on a magic clip too. Damn the possibilities
The best clipper 🙌🏽🔥
Thnx bro
i wanna make it but i think that in the description there are missing parts,can somebody hook me up with a complete parts list?
That soldering iron is dope bro
Well done bro, that is a good job. Can you tell me how did you stick the shaft to the motor please.? Thanks
U need to hammer it with a soft hammer
Alright that is what I did actually, but I was scared to break it ffs🤔😁!! Anyway thanks very much man, you're the best 👌 👍
what do you mean by Shaft bro?
Can you build another one but different color and where did you get the magnet from the machine I've been trying to find the magnet to build a magic clip but I've looked everywhere and they don't have the magnet on top that stabilizes
What's the best way to put the shaft on?
Little orange wire for motor? Where can i find?
Bro, tell me how you put on the shaft? I can't put it on completely ((
U need to use soft hammer 🔨 on it. And when it doesn't go down anymore then u know it ok
@@edounboxingofficial thank you friend 🙏🏻 I will try 😊
What is the shaft ?
hi man i see your video some days ago and i try the same clear case tomb 45 battery S/C blade and the motor but one question i need to get the motherboard for the motor or i can use the same one
Any update ? Still working properly? Or just made it and didn’t really use it?
What is Lubrication?
I have seen it makes it go faster, What is that??
Whats the hot wiring thing called? The thing helping you attach the positive and negative to the motor?
Solder
Yes yes yes, well done Edo. Good job 👍👏
Yes, yes, yes, yes thnx bro
Were do I find the right circuit board ebay sold me the wrong one?
Nice work man. How about the durability and sharpness of this blade? what charger do you use for this?
Amazing work bro! Can you tell us where we get all equipment please
Did you get all the details from Aliexpress?
Help my motor is super loud. Sounds like lawn mower. What do you think I did wrong ?
Woww this is ks wild! Great video brother ... Keep 'em coming! Thanks for sharing the links 🔥
I like your idea, powerful clipper
Thnx bro
Where did you find the gold pieces?
Hello brother I want to ask what size is the magnet attached to the dynamo cap?
Will a jrl motor fit wahl case?
Did you find out?
Bro, you did a custom Wahl clipper, that's supper fast.
Thnx bro
Where did you purchase that item idol.
Links are now on the description
Ty
I have a question the first red cable you put on the new motor where it's coming from ?
You need to make it using 22 AWG and a very small ring terminal. Had to do this myself, its the "negative" for the motor and on/off switch
Wow , this is excellent bro
Good job
Thnx
Would kemei 2600 clipper be almost the same clipper ? Motor mainly. Congrats for the build it should have been fun and educational!!!!
I haven't test Kemei 2600 clipper before
@@edounboxingofficial thanks for replying. Its a super taper / designer of Wahl's based clipper probably based on same motor. This or other that look alike Wahl clipper. You build a nice project though 🙂
@@SqiroS22 thnx bro
Can you do this with the original fast feed?
Bro my magic when i charge it its turn on and when i turn the on button is turn off and when i turn the off button it’s on can you fix it
It's because the shaft of the motor is tight with something.
Were do I get the white piece you put into the gold piece like a pad?
You need to buy it separately from Alibaba it isn't included in the kits, its call the motor shock absorber.
Yo… that blade look just like the fusion blade and where you get that stretch bracket?
I got it from my X-Ergo
Did the shock absorber come with the gold covers or did you have to buy it separately?
Can you send me the link of the motor in the magic 85,000 RPM please
Where are you getting your parts from ?
Excellent idea bro! Good job
can you make a video using it??
I would have love to but I already sold it
Ay man you cant give me the link for the blue battery pls
Can you find an all metal case?
You're too good super powerful this is awesome I want to do same . you can put the link for the battery please it lacks that this thanks
I bought one battery and it didn't fit but I got one free from a friend
@@edounboxingofficial what battery I can put if it hurts you
I havent gotten mine in. But biting the bulledt and upgrsding my battery after 4-5 years. To tomb 45 battery. Seen people day it overhests a bit. But adding a cermamic moving blade. Oil. Spray. And cleaning your took from hair. Should be more then enough to keep it mid. I just got myself a gamma fusio. Blade which is a really grest investment. Overall slowly but surly making my msgic clips into a beast. If they came out with the silver edition when i got my firdt clipper. Trust me thst would obertske any of the clippers i have fr😂💯 its a very meaning ful clipper to me. Down to road ill get it customised.
you are such a wonderful person. I would be grateful if you could send me a link where I can purchase clear case. please
Details link yes?
How long you waited for the parts?
3 weeks
Where we can buy a motor like that?
Great Video Bro 💯
If you do another custom, I would love to test it from a Professional Barber Standpoint
Once again, Awesome Build
Great buddy, good job 👏🏻👏🏻👏🏻
Thnx bro
Kemei , wahl , andis they will end u bro 😂 . U are a legend with your idea bro 🙏 . I think u should sell it by order
Hehehe, I guess I will be hiding for a little while now 😅
@@edounboxingofficial kakaka yes u are 😂 . I like your videos . Thank for sharing 👍
@@thaovu9043 thnx bro
It's not noisy?
Great build 🥶
Thnx bro
What’s the name of the app
LINKS ARE ON THE DESCRIPTION!!!
Weight: 274g
"I already have this motor in my mower. Do you recommend switching to a brushless motor, or is it not worth it?"
give me the link of your app please
how did you get shaft onto motor?
Use soft hammer
Dope Bro. Im planning to do the same before but great Job. Now you gave me Idea. Tnx✌️🔥💯
Oh ok. I hope I didn't spoil your show 😁. And the motor moving really fast bro. There was 6500rpm and 7200rpm, so I took the 7200rpm.
And thanks again for your advice
@@edounboxingofficial lol. 😅 but this one is worth for the mod. As custom clipper is really dope. Proud of you💯🔥
@@sampitz he already sold it too bro 😁
@@benin4life yes, It already sold
@@benin4life i believed that👍🏼. He’s good. I cant even sell one😂
Coloca lâmina de cerâmica
Hi pls I need all that stuff pls how much
Total cost of clipper
Yes yes yes yes yes yes yes! 😎👍 love it 👏
i like watching your videos! very good! does this 337pa engine fit on wmark ng108?
Thnx bro, I dont have Wmark ng108
@@edounboxingofficial okay thanks bro
"Awesome..., where can I purchase every single part that I need to do this?!?!"
very nice and great job
Thnx bro
Cho tôi xin app của bạn
perfect brother👍🏼👍🏼
Hello. What's the application name for the rpm test?
Giri apk
@@bretrobertson8684 why apk ? The official one is free
nice project Brother, could you tell me how much it weight? ty
274g
@@edounboxingofficial very good weight brother
@@makio2477 yes, yes, yes, yes
@@edounboxingofficial i have ordered the same motor, i will put it in the absolute alpha and i hope it will reach the same rpm
@@makio2477 kool, please don't forget to let me know the result when it's done
That was dope👍
Thnx bro
How much bro in Philippine money?
Rpm to high the blade can be hot faster
Yea I know, that's why I put on a Ceramic Blade
Or thin kiepe blade
@@wanhuar8654 yes
Does this cost more than buying the original clipper itself?
It's still just a little bit cheaper but you get a higher rpm and you can find a longer lasting battery. The power on the magic clip is trash and the battery life is less than an hour and a half. With the right motor and battery you get up to 3 or so hours with more power.
Nice job bro🔥🔥🔥
Thnx bro
@@edounboxingofficial I haven’t really been on TH-cam really lately due to school.
This is real DOPE
Thnx bro
Kudos!I will follow you lead and build oneofr my shop.
Can you send me the link to the portable solder?
Thanks a lot.
Once am done I will send you the link to see the process. 🙏
U should resell these clippers !!
Cho xim cai Rmp cua bạn
😮
Nice
Super man
😊👏
Thnx bro
Name it Edo clips...Good job..it's in your afro DNA blacks don't need a blue print
That was my plan but someone offered me a 100€ and it already sold
🙌❤️
💪💪🔥🔥
🔥🔥🔥💪💪💪
Thnx
I will like to buy this one from you, if only you will sell it for 75€
Sorry bro, I already sold it 100€
Can you build one for me ill pay you?
😂😂😂i from Pakistan please TCS ME😂😂😂
🙏🙏🙏🇵🇭👌👍
Thnx
loud :)
Where do you buy the motor online