This is super awesome! I got a ATC 110 i need to restore, so im looking for inspiration. You have the coolest on youtube! You should definitely make more videos!
id love to do this as well I found where to get a motor and parts, I was told you need a rev kit? also is the oil cooler a need? id still add an oil cooler down the road just don't know if I need it for a few test runs other than shaving and the brackets for the engine pretty direct fit? i can go and get a 140 from piranha and should be next to simple?
What’s the intake and carb setup to clear frame and gas tank lol I’m having some firmest issues and don’t wanna just go with my plan which is a cutting wheel hopefully you can help me out thanks in advance
The intake and carb came with the motor when I had purchased it. The frame has been altered from previously braking it, the under side has been welding with a steel pipe. It probably gave me the clearance for the carb/intake. The gas tank I had picked up off eBay it slides on and has a rubber strap on the bottom side to hold it in place.
The tires were purchased from Kimpex and they are Kenda “ RoadGO “ AT21x10-8 Then in brackets below that is says ( 245/65-8) The motor came in a kit with everything, wiring etc and I just picked an exhaust that came up in the suggestions (Amazon)
I had purchased the entire engine kit on Amazon, can’t quite remember if it came with wiring I think it may have. Also came with that exhaust. Oil cooler I bought separately for it.
This is super awesome! I got a ATC 110 i need to restore, so im looking for inspiration. You have the coolest on youtube! You should definitely make more videos!
Awesome build! Need some riding videos of it
wesley leal I wanna make some vids like that, but I needa trailer for my car so I can take
It places
What bars and throttle you running?
wesley leal The bars my buddy gave me, and the throttle I bought off amazon it’s a ACERBIS
What brand and size tires
id love to do this as well I found where to get a motor and parts, I was told you need a rev kit?
also is the oil cooler a need? id still add an oil cooler down the road just don't know if I need it for a few test runs other than shaving and the brackets for the engine pretty direct fit? i can go and get a 140 from piranha and should be next to simple?
Hi did you only use the two back engine mounts and do away with the front one
@@spence_outdoors_scotland Hey there, i have another up close vid about this on the channel
Did the kick start fit or did you need to widen the wheels n tires ?
Wider wheels with spacers
@@KB_Customs would it work with the stock setup or no ?
@@maxnmtb199 I’m not sure
Awesome trike
What brand and size spacers for the rear did u use?
What’s the intake and carb setup to clear frame and gas tank lol I’m having some firmest issues and don’t wanna just go with my plan which is a cutting wheel hopefully you can help me out thanks in advance
The intake and carb came with the motor when I had purchased it. The frame has been altered from previously braking it, the under side has been welding with a steel pipe. It probably gave me the clearance for the carb/intake. The gas tank I had picked up off eBay it slides on and has a rubber strap on the bottom side to hold it in place.
Would you be able to link we’re you got the tires from thank you 🙏🏽
They were purchased from Kimpex and they are Kenda “ RoadGO “ AT21x10-8 ( 245/65-8) I was having trouble finding a link
More!!
Once I get a trailer for my car, hopefully this year, I’ll take it out and get some vids!!
We’re did you get the tires an what size also we’re did you get the motor from
The tires were purchased from Kimpex and they are Kenda “ RoadGO “ AT21x10-8
Then in brackets below that is says ( 245/65-8)
The motor came in a kit with everything, wiring etc and I just picked an exhaust that came up in the suggestions (Amazon)
Did you buy a kit with motor an wiring or how did you do it
I had purchased the entire engine kit on Amazon, can’t quite remember if it came with wiring I think it may have. Also came with that exhaust. Oil cooler I bought separately for it.
Where did you get the exhaust? And do the plastics bolt right up after the swap
I got the exhaust from Amazon I believe and the plastics will bolt up
@@KB_Customs cant seem to find the exhaust could you send a link or screenshot of the one you bought?
@@homie33993 Here is one like mine wholesale-cycle.com/piranha-exhaust-system-honda-atc70-trx70/
@@KB_Customs appreciate it!
What bike was it originally is it a atc70
ATC 110
Did you widen the axle
The axle is stock with 2.5” wheel spacer and those road go tires
Who makes those tires?
These tires are Kenda “ RoadGO “ AT21x10-8
Then in brackets below that is says ( 245/65-8)
Do you have a Facebook or email I can ask you some questions about it on? Awesome build
itzkyleb@live.com
Did you steal my concept 😆