Welldone and great craftsman. To further assist your work, there are formulas out there that can help you calculate the opening angles at which your screw flights can be cut so that the all lap accurately with one another.
Muy buen video, tengo una consulta que no entiendo, por que al conectar el ventilador la turbina se ralentiza. Very good video, I have a query that I don't understand, because when connecting the fan the turbine slows down.
Esto se explica por la física, no soy muy bueno en esto, simplemente al instalar el ventilador, la corriente tiene carga, por lo que el motor del generador funcionará lentamente.
Hey. Can you tell me what material used to make the blade? I am making something that needs the Archimedes screw, but it has given me a lot of trouble to make it. Thanks a million ❤. Regards from Venezuela
I am sorry to say that the blade description diagram equations at 2:18 wrongly show that both the 'a' and 'b' being diameters while in reality they should both be circumferences. Can someone clarify please?
If we take them as circumferences then the sought after diameters A for the small hole and B for the large can be obtained as A = a / pi and B = b / pi.
Hi, i am doing this as my college project, but i have a problem in finding the most suitable gear that i can use for my project. May i know, what kind of gear (pulley system) are you using? where did you get those? Thank you in advance for your help.
Hello Thank you for your video, i'm searching the answer : Dout: 90 / Din: 27 / P: 80 => a=21.22 mm?? b=90-27+21.22 = 84.22mm ? Is this correct ? Thank you for your answer
Hello Again i have Din : 40 mm Dout: 103 mm P 80 mm .. Someboby can help me to find with de formule the value of a and b please ??? Thank you because i didn't have normal value actually
Hmmmmm.. how about an Archimedes screw that is connected to a motor generator, that will power another Archimedes screw to bring back the water up!! Renewable energy, right??
@@mr.construction9846 thank you bhai mil gaya.. 1 made archemedis turbine project for my final year...I need 1 more information., I am confused to select right motor can you give the name of motor that you used in your project.? It will help me
Priceless!!!!!! You can't buy genius ideas like this; they have to be donated to humanity! Thanks brother.
Very cool! Both the pump and the generator, you can hear it slowing down when you put a load on it. Nice :)
Archimedes would be proud to see people of the future still use his screw!
👍👍👍🌹🌹🌹
Sangat menakjubkan kawan👍👍👍👍👍 from Indonesian🇮🇩
The way you used the sticky notes is brilliant.
Ha, intelligence!
When you open a door for the penniless my soul rejoices.
Ha, intelligence!
Congratulations to author of all this !!
Thank you
That's fun. I'm currently working on something like this. The same shape, but using a 3d printer to print segments.
What an amazing guide. You are an absolute legend, thanks
your great golden heart is equal to your bright intelligence!!!
I am your best friend... and sincere fan... Thank you always
Thank you very much 🌹🌹🌹
Wow.....ide cerdas mempermudah pekerjaan petani....sangat bermanfaat
Una bomba de Arquímedes 😊😊😊
Intelligent work with intelligent mind..
so cool!! I am trying to build my own too.. thanks for the video
Excellent job! Awesome video! Well explained. Thanks for sharing!
Thank you
There nary an explanation needed just fine piece of music and straightforward equations!
Thank you for this fine demonstration !!!
Thank You
Channelnya luar biasa..
Mantab bang.. smoga smakin sukses.. 😁😁😁🙏🙏👍🏻👍🏻👍🏻
Thank you
Mantap kepala lu peang! Kincir segitu kecil bisa angkat kipas angin?! Otak dipake brooo
Thank you for your great video.
Thanks
Great video, I love this stuff.
Você é incrivel, meu amigo!!!!🙏🙌🙌🙌🙌👏👏👏👏👏❤❤❤❤Brasil, Rio de Janeiro!
Thank you 🌹🌹🌹
Simplemente genial, felicidades desde Yucatán México
good job 👍👍👍
Mr. Contruction salve 🔌💡👏🏻👏🏻👏🏻👏🏻
Thanks 👍👍👍
extraordinario trabajo !!!
Excellent & useful.
Thank you
Mantap 👍🙏👏
Good work
thanks
Its an art
Sooooo Niceeeeee
Excelente ensinamento. Valeu jovem.
Amazing...
Terimakasih atas informasinya
Welldone and great craftsman. To further assist your work, there are formulas out there that can help you calculate the opening angles at which your screw flights can be cut so that the all lap accurately with one another.
yeah 👍👍👍
would you Please tell me what these are ?
D out=? D in =? P=?
This is awesome. I would like to build one myself for a project. Where did you source the flat grey plastic sheet to make the screw portions?
Excellent
Muy buen video, tengo una consulta que no entiendo, por que al conectar el ventilador la turbina se ralentiza.
Very good video, I have a query that I don't understand, because when connecting the fan the turbine slows down.
Esto se explica por la física, no soy muy bueno en esto, simplemente al instalar el ventilador, la corriente tiene carga, por lo que el motor del generador funcionará lentamente.
Conservacion de la energia. Al haber una carga el generador requiere más energía para girar, entonces ofrece más resistencia al paso del agua
Hey. Can you tell me what material used to make the blade? I am making something that needs the Archimedes screw, but it has given me a lot of trouble to make it.
Thanks a million ❤.
Regards from Venezuela
Yeah, what he said what did you use to build the blade with?
Amazing, but im curious witch engine you're use for light bulb
Gút chóp ơ mây zing anh
Buen generador con su turbina. Debe ser un motor generador AC.
Ótimo trabalho 👏 sucesso aí irmão 🤜🤛
Nice pro
Thanks
Mantap bosku
Thật thú vị ❤👍👍👍🤝🤝🤝
🌹🌹🌹
Very well done and much appreciated. This would work very well for nighttime lighting. !:- )
Thank you
well done
Thanks
RPM for the pump?
muito bom. estava procurando um projeto diy para fazer um desses.
thanks 👍👍👍
Can you specify correct value of a and b, you used here
I got a different idea, an ice machine propeller.. 😁
Super 👍
Thank you
What material are you using for the blades? 1:57 Thank you. Excellent video!
it is pvc sheet made from pvc pipe
Hi, nice video, one question. Does it still work if you place the screw completely vertical? is it still able to bring the water up?
I am sorry to say that the blade description diagram equations at 2:18 wrongly show that both the 'a' and 'b' being diameters while in reality they should both be circumferences. Can someone clarify please?
If we take them as circumferences then the sought after diameters A for the small hole and B for the large can be obtained as A = a / pi and B = b / pi.
a = √( P² + (πDin)² ) and b = √( P² + (πDout)² )
I will appreciate if someone can clarify this.
I calculated the diameter, so I will divide by Pi, you calculate the circumference, so don't divide by Pi
smart idea
Parabéns
great!
شكرا merci
👍👍👍
Great video! what's that large flat piece of pvc called and where do i buy it?
Most likely is just a heated pvc tube after you cut it in half
@@omar.jonguitud Idk looks pretty well flattened if that's the case, i guess the sides aren't very neat so maybe...
Look for PVC foam sheets.
What’s attached to the dc motor and what stuff did you use in this wonderful creation
Thanks 🌹🌹🌹
Is it possible that it works if you put it in the current of a river? Instead of the electric motor? Like a scroll pump system?
👍👍👍
Muy bueno
Thanks
Aqui no planeta uranio nos usamos o movimento elecoidal para transportar grão
Tem muitos aplicativos
thx.
Quantos metros de profundidade deve puxar em um poço?
Hi, i am doing this as my college project, but i have a problem in finding the most suitable gear that i can use for my project. May i know, what kind of gear (pulley system) are you using? where did you get those? Thank you in advance for your help.
It's old motorcycle cam sprockets
Hello Thank you for your video, i'm searching the answer : Dout: 90 / Din: 27 / P: 80 =>
a=21.22 mm??
b=90-27+21.22 = 84.22mm ?
Is this correct ?
Thank you for your answer
a will be greater than Din, and b will be greater than Dout. In this case a =~37, b=~100
😍💯👍👍
So, when generating electricity, the turbine started to move slower...
Wouldn't this usable as break?
All is ok, but tell please what glues you use for the pipe ?
It is 611 . epoxy glue
@@mr.construction9846 You can show pics for box or tube for this glue ?
Can WE make it much smaller and IS that work if WE put it vertically. Thanks
I hope your next videos put the explanation or sub-title
👍👍👍
Apakah bisa charge battery like solar panel mr
Ya, tapi saya pikir cukup lama
Que pegamento usaron para pegar esos tubos🤔
What materials did you use? I need to make one 20cm for a Rude Goldberg device. Thanks
Good day, I have an artesian well with a depth of 90 meters. Is it possible to pump water in this way, thanks?
I don't think it works
que motor usaste? me refiero a la potencia y tipo de coriente.
Very interesting, however could you tell us what materials you are using?
All made from PVC pipes
@@mr.construction9846 the auger flights are sheet PVC?
At first, I thought it was cold rolled steel LOL!!!! Plastic??????
👍👍👍
when i try to make it, it's so hard to shape the blade, how do you shape the blade so easily?
Hello coule you hélp with thé formule with an exemple please,? Thank you very much
😍👍👍👍👍
Hi...can i install this type in a 1inch pipe? Can i produce 5watt electricity?
What is the spec of the motor?. Motor shaft diameter?.. what is the dimeter of shaft in turbine
I have instructions in the video
Anh cho kích thước đường kính trong cả ngoài của hình tròn được không . Thank
Mình hướng dẫn để các bạn làm với kích thước tự chọn đó
👏👏👏👍
Hello Again i have Din : 40 mm Dout: 103 mm P 80 mm ..
Someboby can help me to find with de formule the value of a and b please ???
Thank you because i didn't have normal value actually
a =47.4 , b =110.4
interesante
Que material usaste para el espiral del rotor? Puedes por favor compartir el link de compra?
Saludos desde Colombia
Es un tubo de PVC aplanado.
Which liquid used for joint in screw
It is 511 . epoxy glue
Hi, may I know the unit you use? It's mm, right?
That's right
Hello, how many volts does it output?
Very very very... very little
Somebody please tell me what is P ini this formula?
P is the pitch, the length where the helical makes a complete turn.
How is P determined?
p is the previous parameter
Ka apakah bisa mesen alat dan bahanny?
Atau bisa mesen spiral nya🙏
Hmmmmm.. how about an Archimedes screw that is connected to a motor generator, that will power another Archimedes screw to bring back the water up!! Renewable energy, right??
That's the theory, but the metabolic energy will be consumed
60mm diameter pi . in dia and out CIA what it is?
Tem muitos aplicativos
アルキメデスの螺旋
👍👍👍👍
Nice one... jis cement se blade ko aap join kar rahe hy uska name kya hy ?? Kya aap uska link send kar sakte hy ki use kaha se buy kare please
yah epoksee gond 611 hai, ise naam se khojen
@@mr.construction9846 thank you bhai mil gaya.. 1 made archemedis turbine project for my final year...I need 1 more information., I am confused to select right motor can you give the name of motor that you used in your project.? It will help me
Ого, как от добавления нагрузки мотор тормознул ....
Тихо медленно
Where did you get the formula?
I consulted on the internet
@@mr.construction9846 please link the source next time bro
how many rpm is needed to turn the screw and what are the specifications of the motor?
hope u reply my question
Rpm of screw about 120, That motor is 110v 52w dc motor (for alternator turbine video)
The correct name of the "Screw Step" is the "Pitch"
😁😁😁😁😂😂😂