I’ve got Rocktrix RT111 in bronze on my F150. I love them. Also run Patagonia MT. I get 50k out of a set on an F150. If you don’t like the center cap you can take the logo off. A heat gun really helps. Then I took a hole saw cut a hole then epoxied raptor center caps in.
Just ordered some Rocktrix after weeks of going back and forth between KMC, Method, and Black Rhinos, based on the reviews and the cost difference, plus the design RT had available I pulled the trigger on 5 17/9 RT105, I went with +12 offset. I don't like too much poke. I'm excited for them to get here!
I love my rock trix, price, look and performance. My shop said they were the easiest wheels to balance (with 33x12.5 Kenda Klever RTs). The offset is perfect IMO
Because the Toyotas bolt pattern is the same as a 6 lug Chevy, would the wheels that RockTrix sell specifically for those Toyota’s still fit on a 6 lug Chevy? I really would appreciate this confirmation because I really like the rt107 and would like to get them for my 1994k1500.
That’s a great question. I’m not sure but RockTrix answered another question I had emailed within a day. I’d shoot them a message and see what they say!
Here’s their direct contact page to save you a step: rocktrix.com/pages/contact If you think of it, drop another comment with what they say. I’m sure it will help some other people out as well! Take care 🤙🏼
I just tried but there isn’t enough space around it to fit a socket so I would have to guess no. You could always mask around them and spray w/black rattle can.
I appreciate the review, I’m running the procomps on my jku as well for the time being, but may go with these guys for my wife’s 4runner, haven’t heard of em until your video, so thanks man. I’m here in the Phoenix area, hope I can get on some local trails with ya sometime 🤙 you a veteran by any chance?
I've been running these from teraflex for a couple of years. They show surface rust fairly easily but have held up well. amzn.to/34tlSis Affiliate link. Thanks for the comment!
Like the wheels! How’s the super 30 holding up to 37s. Considering that route. Im not a real aggressive driver. Trying to avoid asking the wife for a new axle 😂
Bro I feel that! Axle swap is no joke. For me the D30 is holding up great. I am also pretty conservative/common sense when I’m offroading and don’t go crazy LOL. So far so good with the Artec Apex front truss + C gussets although I know it’s my weak link so it’s only a matter of time before I need to do something different! Light wheel/tire setup really helps too.
4.5 BS isnt enough for 37's... Box em back up. Get a set 3.5 BS and call it done. Why run em when the reason you swapped to em was to NOT run spacers? Youll end up throwing 1" spacers on those to stop rubbing lock to lock.
I hope you’re wrong LOL there will be a .5” difference (narrower) over what I currently have due to the -12mm offset these new wheels have. We’ll see 😬😬😬
I just ordered a set of the 17” bronze 111 for my 2005 Tundra. Thank you for the video.
I’ve got Rocktrix RT111 in bronze on my F150. I love them. Also run Patagonia MT. I get 50k out of a set on an F150. If you don’t like the center cap you can take the logo off. A heat gun really helps. Then I took a hole saw cut a hole then epoxied raptor center caps in.
Nice! Thanks for the comment and info 🤙🏼
Just ordered some Rocktrix after weeks of going back and forth between KMC, Method, and Black Rhinos, based on the reviews and the cost difference, plus the design RT had available I pulled the trigger on 5 17/9 RT105, I went with +12 offset. I don't like too much poke. I'm excited for them to get here!
That’s great! Hope you like them as much as I have.
I had a set of RockTrix on my JL and they were great. Only switched because I was looking to take my build in a different direction!
Great to hear!
Nice wheels they run well but as any wheel bouncing off rocks it will scratch and that’s just life! Thanks enjoy!
Thanks for the comment Jay!
I love my rock trix, price, look and performance. My shop said they were the easiest wheels to balance (with 33x12.5 Kenda Klever RTs). The offset is perfect IMO
For sure! That’s awesome.
Been debating on getting these…thanks for the review!
Glad it was helpful!
You’re my favorite overlanding TH-camr. Thanks for the continued great content! 😊
Appreciate it bro! 💙
Because the Toyotas bolt pattern is the same as a 6 lug Chevy, would the wheels that RockTrix sell specifically for those Toyota’s still fit on a 6 lug Chevy? I really would appreciate this confirmation because I really like the rt107 and would like to get them for my 1994k1500.
That’s a great question. I’m not sure but RockTrix answered another question I had emailed within a day. I’d shoot them a message and see what they say!
@@4XTRAIL that would be much appreciated. Thank you so much man! You just gain another subscriber. Keep up the great work!
Here’s their direct contact page to save you a step: rocktrix.com/pages/contact
If you think of it, drop another comment with what they say. I’m sure it will help some other people out as well! Take care 🤙🏼
@@4XTRAIL will do man! Thanks again. I’ll give them a call tomorrow and come back with information to share!
Make sure to check the hub size. On my fj cruiser the hub was around 4" and the chevy rims were around 3" or 3.5".
Have these exact same wheels on my Jku and I like them a lot. I run 1.5” spacer with them though just so it’s a little wider
Glad to hear you like them! What size tire / lift are you running?
@@4XTRAIL 2.5” on 35s but going to 37s soon!
@@rc_dylan right on!
Is it possible to remove the silver bolts around the wheel and replace them with black ones?
I just tried but there isn’t enough space around it to fit a socket so I would have to guess no. You could always mask around them and spray w/black rattle can.
I appreciate the review, I’m running the procomps on my jku as well for the time being, but may go with these guys for my wife’s 4runner, haven’t heard of em until your video, so thanks man. I’m here in the Phoenix area, hope I can get on some local trails with ya sometime 🤙 you a veteran by any chance?
That’s great man! I am not a veteran but very grateful for our vets!
@@4XTRAIL haha i got the vet vibe so was just curious XD keep it up , loving the channel!
Keep the videos coming!
Appreciate it!
Waiting on my rt105s to come in for my '08 tundra with a +12 offset. Got tired of the factory rims lol
💥💥💥
Awesome something awesome in your channel!!
Thanks for the comment Paulo! Glad to hear 👏🏼
are these wheels compatible with your original TMPS sensors? or did you have to get new ones?
Good question. I believe the factory TPMS would transfer but I opted to go without since my PSI is so different than factory + airing down off road.
Will the Jeep center caps work with these wheels?
That’s a good question. I didn’t have any to try so I can’t say.
They remind me of the Method 301s
Totally!
Just bought the RT 110, what size lug nuts are recommended?
I've been running these from teraflex for a couple of years. They show surface rust fairly easily but have held up well. amzn.to/34tlSis Affiliate link. Thanks for the comment!
I cant find a review yet of someone crawling with them yet. Have you had a chance to take them offroad?
Only light trails so far but stay tuned! More on these wheels coming soon.
Like the wheels! How’s the super 30 holding up to 37s. Considering that route. Im not a real aggressive driver. Trying to avoid asking the wife for a new axle 😂
Bro I feel that! Axle swap is no joke. For me the D30 is holding up great. I am also pretty conservative/common sense when I’m offroading and don’t go crazy LOL. So far so good with the Artec Apex front truss + C gussets although I know it’s my weak link so it’s only a matter of time before I need to do something different! Light wheel/tire setup really helps too.
4.5 BS isnt enough for 37's... Box em back up. Get a set 3.5 BS and call it done. Why run em when the reason you swapped to em was to NOT run spacers? Youll end up throwing 1" spacers on those to stop rubbing lock to lock.
I hope you’re wrong LOL there will be a .5” difference (narrower) over what I currently have due to the -12mm offset these new wheels have. We’ll see 😬😬😬
Your lighting is horrible
Haha what’s up man! Yeah I agree, lighting wasn’t great for this unboxing vid since it was shot at night. Thanks for watching!