This error is caused by water getting into the watch. Mine did this too after I was in the pool and had it on me in the water. The contact end of the display ribbon cable and the motherboard connector are oxidized. Therefore, the display's touch sensor does not work. The watch must be taken apart and the oxidation thoroughly cleaned. After that, if the display works properly, the display must be glued back with T7000 glue.
Omg thats my same issue, I was swimming in the sea, it started vibrating until it got 0%, and rn the touchscreen doesn't work, what did you do? Can the MiBand assistance fix it?
@@rob_1354 The clock must be disassembled. to clean connections from oxidation. If it has not oxidized irreparably, then perhaps the fault can be repaired.
I have the same problem, I kept it when I was swimming. It is full charge but the screen is not working I tried the hair dryer but not result. I did not manage to open it. How can I do that? Thank you in advance
It happened to my miband 6 and now on my miband7. I had miband 3 and 4 before and I never had this issues even when used with everyday chores or when I’m swimming training. The older versions have impeccable waterproofing while the new ones barely last me a year. I’ve been with apple but never bought their watch because I hate charging my watch everyday. If this is how the new mibands are, it’s gonna be a waste to replace them every year even if they are cheap. I was even planning to buy the band pro which is 2x price of miband. Now I’m thinking of switching to apple but such a waste with all my records in Zepp.
POSSIBLE SOLUTION: 👉👉 For some reason the wake up screen setting may have changed from "tap the screen" to "sweep up the scree" (so was in my case). To change it go to settings > screen wake-up > tap the screen
In my case, swiping up won't do anything. Still unresponsive, but I can see the locked item on red on the top of the screen, so I think it is just locked, but don't know how to unlock it.
So in my case, this was not a touch vs swipe issue - the whole touch screen stopped responding. I seem to have fixed it however! I'm not entirely sure how, but it was one of two things: 1. Hairdryer for a few minutes to get rid of any trapped moisture 2. I squeezed screen very firmly - idea being to fix any loose connection to the screen Think it was probably the second of these, but both are worth a try.
My Mi Band 6 worked for about 2 hours until the touch screen stopped working. The ;lift to wake' works but not the touch so i can't access the settings to do a reboot! Has anyone found any solutions?
Same too but then I went to settings and it said that I had it on "swipe up on the screen" mode . U should have it on "tap on screen mode". Am not sure if that was me who put it on that mode or it happened automatically
Mine just died earlier today. Since it is mot responding to touch, tried to charge it. Then nothing is showing up on the screen. Then all of a sudden, it just keeps on vibrating.i just let it drain any remaining juice in it
I have the same problem. I went to the swimming pool with it. I didn't expect it to have a problem as i wore it to seawater few times. Can anyone tell me what to do? 🥺 It was my husband's valentines gift. I'm so sad.
Podem-me ajudar? o meu xioami band 8 (tem 2 meses) o problema no carregamento e aquecimento: Começa a carregar ao fim de 4 % , aquece e começa avisar que a temperatura está alta(fica muito quente) e não carrega mais. Obrigada.
So for me the only way I've managed to fix it is via a hard reset. Luckily I had notifications turned on which did wake it long enough to get in settings and perform a hard reset. Once I did a hard reset and synced the watch it's working absolutely fine again. Originaly though it was a hardware fault.
today I had the same problem ... now it's late night and just a few minutes ago it turned on by itself with a green / yellow glitched screen and as soon as I touched it, it burned my hand, to avoid problems I put it in balcony ... be careful if you get stuck too!
I have the same problem!! I used my band only for once and when it ran out of barites I tried to charge it and the touch screen is not responding!!! Very disappointed!! :(
can anyone tell me the solution of this problem? touch stop working so i can't do factory reset or something else from watch and there is no option on the app
Leonardo, aqui também o mesmo problema depois de eu tomar um banho de piscina aquecida. Havia desistido, o touch parou total. Para minha surpresa, depois de umas 16h ele voltou a funcionar. Não sei por quanto tempo, mas aparentemente voltou.
I had all versions of MI Band and this is the worst. First it began to fail when trying to start, then the batteries began to last less days and now the touch does not respond.
Me too just yesterday my mi band 6 touchscreen not responding, swipe or tap not working, screen only lights up when i charge it or remove charger but still touch not working, also it still connects on my mi fit app.
1- Tente reiniciar a pulseira ( por sorte mesmo o meu com esse problema eu consegui). 2- Vá em configurações da pulseira uma das últimas opções é " reiniciar " . 3- Abra o app mi fit e depois em desemparelhar. 4- Depois disso ela voltou ao normal
2 ปีที่แล้ว +4
Sem funcionar o touch está complicado, não conseguimos reiniciar.
I think everyone is facing the same issue. Mine also turned of in just 2 hours and I received it today and fully charged it. Tried many times to turn it on but failed.
@@BeRealistic100 it does bot work and idk why probably cuz:Today i stay outside in the garden and the sun was soo powerfull and peob the sun is the pb and it is dameging the screen:(
This error is caused by water getting into the watch. Mine did this too after I was in the pool and had it on me in the water. The contact end of the display ribbon cable and the motherboard connector are oxidized. Therefore, the display's touch sensor does not work. The watch must be taken apart and the oxidation thoroughly cleaned. After that, if the display works properly, the display must be glued back with T7000 glue.
Omg thats my same issue, I was swimming in the sea, it started vibrating until it got 0%, and rn the touchscreen doesn't work, what did you do? Can the MiBand assistance fix it?
@@rob_1354 The clock must be disassembled. to clean connections from oxidation. If it has not oxidized irreparably, then perhaps the fault can be repaired.
I have the same problem, I kept it when I was swimming. It is full charge but the screen is not working I tried the hair dryer but not result. I did not manage to open it. How can I do that? Thank you in advance
@@saidasajid5238I was wondering the same thing
It happened to my miband 6 and now on my miband7. I had miband 3 and 4 before and I never had this issues even when used with everyday chores or when I’m swimming training. The
older versions have impeccable waterproofing while the new ones barely last me a year. I’ve been with apple but never bought their watch because I hate charging my watch everyday. If this is how the new mibands are, it’s gonna be a waste to replace them every year even if they are cheap. I was even planning to buy the band pro which is 2x price of miband. Now I’m thinking of switching to apple but such a waste with all my records in Zepp.
Same happened with me. But it's not getting start after removing charger
Me too bro tell solution plsss
Me too
Me too
Me too
Me too
POSSIBLE SOLUTION: 👉👉
For some reason the wake up screen setting may have changed from "tap the screen" to "sweep up the scree" (so was in my case).
To change it go to settings > screen wake-up > tap the screen
Thanks mate, in my case that started to happen after last firmware update. I didn't know were a settings for that.
Thank you so much mate. I thought I need to buy a new one cause of this. Glad I saw this before I did the purchased.
Thank you
In my case, swiping up won't do anything. Still unresponsive, but I can see the locked item on red on the top of the screen, so I think it is just locked, but don't know how to unlock it.
This helped me ! Thanks much
So in my case, this was not a touch vs swipe issue - the whole touch screen stopped responding.
I seem to have fixed it however! I'm not entirely sure how, but it was one of two things:
1. Hairdryer for a few minutes to get rid of any trapped moisture
2. I squeezed screen very firmly - idea being to fix any loose connection to the screen
Think it was probably the second of these, but both are worth a try.
From swimming, I got the same outcome, can someone explain how was it possible since the band is supposed to be submerged?!
I know this sounds weird, but this was happening to my band, I let it fall from 1m maybe and its working now
Wut
WHAT
I'm facing with the same issue. @xiaomi should release any note about it!!
try sweeping up the screen
@@BeRealistic100 yeah
@@BeRealistic100 still doesn't wooork
Guys, be aware if you just bought the band and it's not turned on, it comes with 0% battery so you have to wait for like 30min to make the screen on.
Bro is it real
Because my watch not oning
@@jaisurya.sstmarks9572
Yep, That's just what i did, and it's start working for me
me: just few minute on mi band 5
@@wait... it's been hours but still not opening bro
Same problem with my mi band 6.. my mi band 4 more durable.. until now still functioning without a problem..
My Mi Band 6 worked for about 2 hours until the touch screen stopped working. The ;lift to wake' works but not the touch so i can't access the settings to do a reboot! Has anyone found any solutions?
Same bro
mine, too
Same too but then I went to settings and it said that I had it on "swipe up on the screen" mode . U should have it on "tap on screen mode". Am not sure if that was me who put it on that mode or it happened automatically
mine too😢
moi aussi😢
I have the same problem
Mine just died earlier today. Since it is mot responding to touch, tried to charge it. Then nothing is showing up on the screen. Then all of a sudden, it just keeps on vibrating.i just let it drain any remaining juice in it
Mine did just the same. Did it work?
same here. charged again. but no touch no display
same here , what to do ?
Same problem here, I don't know why!🤷🏻♀️😭😭😭😭😭
Me too
I have a problem with the connect to mi fit 😢
I have the same problem.
I went to the swimming pool with it. I didn't expect it to have a problem as i wore it to seawater few times.
Can anyone tell me what to do? 🥺
It was my husband's valentines gift. I'm so sad.
Same
Same
Same 🥲
Same here
It happened to me too 😢
it happen to mine when i was in a disney hotel pool, it is so sad, i am trying to fix mine right now,
Same problem
I have same problem. I have dried it but it still won't turn on. only lights up when charging
Same problem
yep, have the same problem, after swimming in a pool...
Me too cant on i put charge full night 'still can't 😢
I love this vidio❤
First power 🔋 on tha watch
Podem-me ajudar? o meu xioami band 8 (tem 2 meses) o problema no carregamento e aquecimento: Começa a carregar ao fim de 4 % , aquece e começa avisar que a temperatura está alta(fica muito quente) e não carrega mais. Obrigada.
Unpair it to your device (phone) then pair it again it . I tried it and it works
So for me the only way I've managed to fix it is via a hard reset. Luckily I had notifications turned on which did wake it long enough to get in settings and perform a hard reset. Once I did a hard reset and synced the watch it's working absolutely fine again. Originaly though it was a hardware fault.
Same problem in OnePlus band
I think it's because of some scratches
me too , i think really broken. Can not charge also , touch anything also didn't work
what to do?
today I had the same problem ... now it's late night and just a few minutes ago it turned on by itself with a green / yellow glitched screen and as soon as I touched it, it burned my hand, to avoid problems I put it in balcony ... be careful if you get stuck too!
I have tried to charge it but it wont open
Just bought my 4 hours ago.. After charging it aint working now
Same
I have the same problem!! I used my band only for once and when it ran out of barites I tried to charge it and the touch screen is not responding!!! Very disappointed!! :(
try sweeping up the screen
Try swipe up on screen
it only works if I swipe....you need to go to a setting that unlocks either by swipe up or by touch....mine changed to swipe up for some reason
Thank you
SAMEE
same, thank you
@@sajmon1104 glad to help so many people with a simple comment, always leave your comment if you fix something, I would have never imagined
@@vivarantx sure bro🙏
some problem here too
Same😢😢
Tănase s-o much ai lovește you🥰
so what the solution for this? swipe & tap both didnt work.
solucion?
mine too has frozen
now it just has four dots on the screen red, yellow, green n blue dots
same!
Same happened with me.
Me too
Mesmo problema na minha. Segunda pulseira da Xiaomi que perco já. Não compro mais.
Plug it into your charger
And let it to charge for 30 min to 1hr the band will start working .
Swipe up
can anyone tell me the solution of this problem? touch stop working so i can't do factory reset or something else from watch and there is no option on the app
O dziwo naprawia się , zaczął się ładować, ładowarka była za luzna
You guys scared me i ordered mi band 6 😢
How to connect it on mobile?
same problem. Even after unpairing, I cannot repair cause I need to tap the check button to verify signature.
swipe up chinese
Same problem in one plus band
It just the software issue
Or display touch sampler problem
Just found out these are a scam (These trackers are supposed to be waterproof and older models always were for me)
Same problem. Owned less than a month
swipe up
@@vivarantx swipe up doesn't work either
Swipe up to settings >> Screen Wake Up >> Tap the Screen (and fixed)
Thank you! I must’ve changed it by accident
This worked for me as well. Thanks. No idea how it changed.
Swiping up won't do anything in my case. The whole screen is not responding.
@@amilkarherrera9804 mine to. Its been a day since it happen. I dont know what to do
@@jomariebautista8509 return it then
I regret buying it from Amazon
me too :(
@@vmavpt74 :(
The same issue since 2 days ago
try sweeping up the screen
Some problem is my band 7
نفسك🥲 same here
That happen to me...realize i need to swipe up the watch...i did not set that and tought it was a bad problem...but is not :/
Peki çözüm nedir
same problem
Tengo el mismo problema con el mío pero es un Band Xiaomi Smart Band 7 Gl
Bruh you can't touch anything when it's charging or when it's not paired
حدثه نفس المشكله اليوم لكن بعد ازالتها من الشاحن طفت الشاشه بالكامل ولم تعد تشحن مره اخرى 🙃
I have 3 and they all broke
Only use it for 1 year -+
Lcd weak
Pair first
😂😂😂
I have the same problem 😔
MI products and service centres are the worst
Same problem in my OnePlus band.
You should charge
Same problem after update
O meu tá com mesmo problema 😤😤😤😤
Estou com o mesmo problema infelizmente
Também, só a parte inferior a funcionar
Aqui morreu total.
@@ppbergo Boa noite, conseguiu algo, a minha esta com o mesmo problema
@@guitosieng não. Desisti...
Leonardo, aqui também o mesmo problema depois de eu tomar um banho de piscina aquecida. Havia desistido, o touch parou total. Para minha surpresa, depois de umas 16h ele voltou a funcionar. Não sei por quanto tempo, mas aparentemente voltou.
I had all versions of MI Band and this is the worst. First it began to fail when trying to start, then the batteries began to last less days and now the touch does not respond.
Same issue here!
swipe up
@@vivarantx How Bro?
try swiping up
Kabhi kabhi hota hai mi band 3 ke sath bhi hota hai
Ha bhai shi bole.
Mere pass bhi Mi Band 3 hai and mere sath bhi hota hai. 😐
same problem here
try sweeping up the screen
Same problem with mine
swipe up
Same here
Same doesnt work
AMOLED SCREEN ON MB6 IS A FAIL!
I cant get refund, I want rebate for MB7
swipe up...there's a setting that unlocks screen by swipping up or touching screen
You need to pair it first
The problem is you need to tap the screen to confirm the pairing.
Me too just yesterday my mi band 6 touchscreen not responding, swipe or tap not working, screen only lights up when i charge it or remove charger but still touch not working, also it still connects on my mi fit app.
Same problème
Encontraste alguna solucion o ya no sirvio el reloj?
For me the screen just randomly swipesnon its own
@@elizabethvazquezcampos868 llevo dos igual no funciona el touch ni deslizar espero encontremos una solución
I Just swipe up
How?
@@lucasbhz swipe up or go to the app and restart the watch
me too just yesterday :'(
and mine too?!!
swipe up
@@vivarantx Genuinely damaged touch screen, so swiping up or tapping doesn't work. Only occasionally works if you have wet hands and swipe up.
Mine too
Do skipa
1- Tente reiniciar a pulseira ( por sorte mesmo o meu com esse problema eu consegui).
2- Vá em configurações da pulseira uma das últimas opções é " reiniciar " .
3- Abra o app mi fit e depois em desemparelhar.
4- Depois disso ela voltou ao normal
Sem funcionar o touch está complicado, não conseguimos reiniciar.
@ swipe up vaitola
Same issue worthless
حمل التطبيق
So what is the point of this video?
😂😂😂😂😂 you don't know your band settings
Same problem here screen not responsing
First you do charge
Did you find any solution to this problem?
Unfortunately not, got a full refund from Banggood after having to go full Karen on their chat representative.
No I have same issue
@@erezjl can go katen here in lagos
iReally used to like mi bands, not anymore
someone ever told me to blow it with hairdryer to 5-10 minutes, it works on their mi band 5
Does it work to you?
@@charmainefaye5358 sadly it's not, but it is not make any damage either so worth to try 😂
I'll update you what will happen if it will work for mine. 😂
@@charmainefaye5358 if you buy it less than 12 months it's better to get refund actually
@@edlysia1079 i just had this maybe not over a year already
For some reason, I just keep pressing the button 🔘 and it finally turns on..
Shit, it really worked. Thanks
What button
Same problem :( I used it in the sea
swipe up
@@vivarantx nope, still not working
@@vivarantx motherfucker How ?
found solution?
I think everyone is facing the same issue. Mine also turned of in just 2 hours and I received it today and fully charged it.
Tried many times to turn it on but failed.
same problem. No solution yet?
try sweeping up the screen
@@BeRealistic100 it does bot work and idk why probably cuz:Today i stay outside in the garden and the sun was soo powerfull and peob the sun is the pb and it is dameging the screen:(
This product is poorly made. I bought 2 and it only lasted a month dont buy these trash
Nice man you're a fu*king genius
Tiene solución
swipe up
Cual seria la solución , hace días que estoy con mi pulsera sin funcionar