How to remove the headlights and replace bulbs on 2008 Range Rover Sport

แชร์
ฝัง

ความคิดเห็น • 18

  • @king_41x95
    @king_41x95 27 วันที่ผ่านมา

    Thank you made it easy for me

  • @jonbee22
    @jonbee22 3 ปีที่แล้ว +5

    Appreciate this video, this is a huge help, had trouble replacing the headlights, video was on point!

  • @SemourKlitz
    @SemourKlitz 2 หลายเดือนก่อน

    Thanks for doing this video. I just lost a left side head lamp last night. But next time have a friend video this separately rather than narrating and trying to hold your cell phone yourself.

  • @calamusnomen6074
    @calamusnomen6074 2 ปีที่แล้ว +1

    Great video! I'm about to start troubleshooting a dim low beam headlamp (which I believe is a grounding problem) on a recently acquired 2008 RR, but decided to watch your video because I will at some point need to check connectors, wiring, or eventually replace bulbs. Definitely one of the best how to videos I've seen. Simple, straight forward, with some good tips. Thanks!

  • @josephsawyers82
    @josephsawyers82 3 ปีที่แล้ว +1

    Sir i must commend you for teaching veiwers on utube how to take out the head lamps on 09 range ur teaching so simply explained thumbs up i could understand u
    clèàrly comparing to others ur teaching from open the bonnet to the end .very well explained 👍👍👍

    • @Marinedad10672107
      @Marinedad10672107  3 ปีที่แล้ว +1

      Thank you.

    • @DavidSmith-sf4dr
      @DavidSmith-sf4dr 2 ปีที่แล้ว +1

      @@Marinedad10672107 hello Mdad, thanks very much for posting this video, it’s been really helpful 👍. I’ve changed the low beam bulb on my rr sport 2006 model, but it still won’t come on. Have you any idea what I should do next please? Thanks Mdad. 👍

  • @vvrroomm68
    @vvrroomm68 3 ปีที่แล้ว +2

    Thank you for posting this video. I had one minor obstacle with my xenon low beam ballast. The inner white plastic ring rotated slightly while I had it removed to change the bulb, so when I tried to put it back the posts on the stem of the bulb would not insert fully and the four prongs could not turn. The solution came once I examined the inside of the ballast socket and noticed four notches in the inside white plastic ring that were out of alignment. Once I lined them back up with the outside four notches it snapped easily into place.

    • @Marinedad10672107
      @Marinedad10672107  3 ปีที่แล้ว +1

      Thank you for the tip.

    • @vvrroomm68
      @vvrroomm68 3 ปีที่แล้ว +1

      Have you had to replace your fuel tank skid plate on this model yet?

  • @pritgill6269
    @pritgill6269 4 หลายเดือนก่อน

    if you could do a video on headlight lens replacement?? i would really appeciate it.

  • @Connoisseur617
    @Connoisseur617 ปีที่แล้ว +1

    How about a name for the bulb sorry if I missed it

  • @mrcartooneme4883
    @mrcartooneme4883 ปีที่แล้ว

    My right bulb wont re adjust into normal position when I turn on my RR. What do you think it can be? It doesn’t self level up it stays down. Only turns left and right.

  • @数根朽木
    @数根朽木 2 ปีที่แล้ว +1

    i am trying to remove the headlight for my parents' sport, it has the same electrical connector as the at 2:49, however i can not get it back to the headlight after my work done. any suggestions on how to reconnect them? thanks every one

    • @DavidSmith-sf4dr
      @DavidSmith-sf4dr 2 ปีที่แล้ว

      Hi , good luck with your parents sport headlight, I’ve got a similar problem on my rr sport 2006. I’ve replaced the headlight bulb but it’s still not working . Do you know what my next step is please. Thanks

    • @数根朽木
      @数根朽木 2 ปีที่แล้ว +2

      @@DavidSmith-sf4dr hi i suggest you try to replace the ballast, it only cost around 20+ dollars on amazon.

    • @DavidSmith-sf4dr
      @DavidSmith-sf4dr 2 ปีที่แล้ว

      @@数根朽木 thanks so much for your reply, is the ballast the flat metal unit on the underside of the headlight? Thanks again 👍

    • @数根朽木
      @数根朽木 2 ปีที่แล้ว +1

      @@DavidSmith-sf4dr yes it is. before you replace anything, try to swap your non-working headlight assembly to another side of your car. just want to make sure it is the problem of headlight aseembly, not something else.