For the haters- we just work with what we have- everyone has different things going on in their life, you don’t know his circumstances… maybe he had a forester and just decided to make the most of it. As for me, I got a lot out of this video and found it really informative. I dont need as intense of a build, but i have a 65w hood panel and 100w panel on my roof cage: a 1500 WH battery to run a heater, tea kettle, and lights; I have a pedal commander as my throttle controller, and got the nameless air intake and HKS legamax muffler (quietest one I could find that is still louder than stock). I don’t think he needs a tune- the engine has low power to start with, and even changing the throttle response, it is still operating well within the parameters of the engine. Meaning, it would be comparable to if you were routinely just stepping harder on the pedal, but that’s all.
I appreciate it. Yes I don’t have $100,000 to throw into a jeep gladiator. I traded my 21 Forester sport in for this and just slowly building it for my adventures. Just planned 4 day 300 miler :) I love it and I appreciate the kind words. Probably don’t need to tune youre right, but I did go ahead and buy a Thorton tuner chip. I don’t know if it’s helping but the car hasn’t exploded yet lol. And the skids, sliders are necesssry.. have those my car would be rusting on a mountain right now, they’ve saved my ass several times.
I appreciate it, don’t be envious, (it’s expensive and frustrating haha but a lot of fun) it’s been almost 3 years now and I’m still working on the bill. I appreciate it, my car has changed even since this video. I need to put out a new one, but I do have the build list if interested - I love talking about building and overlanding.
That’s a comprehensive build! I’d definitely be looking at a pro tune if you’ve started playing with air intakes etc, number 1 thing that will make a Subaru engine go bang.
Yeah, I haven’t had it professionally or truly tuned. I just have that auto tuner for a quicker response time. Any advice on where to go? Or can any shop do a real tune?
@@Subie_OffXroad in all honesty if I was you, the first thing I would be doing is putting the stock intake back on and getting rid of the billet blocks and going back to standard. There are no good tuning options, this isn't a performance motor and the benefit is so minimal it's just not worth blowing an engine over (not to mention you have no warranty coverage now either). Messing with the air intake mixture is a sure way to blow these motors up, have seen it before.
@@SteveC-Aus lol 1, no engine is going to be blown bc of a little more air intake. 2, it actually helps. 3, I’m not racing it. 4, it’s not out of tune nor does it actually need one. Let’s go through it all: Adds 15 HP / 22 TQ - No Tune Required Improves Acceleration Decreases Delay between Shifts with AT Increases the Volumetric Efficiency of your Intake Manifold Maximizes the Potential of Aftermarket Intakes Naturally Aspirated (N/A) vehicles are starving for air without a turbo. Sure, an aftermarket Intake / Cold-Air Intake will bring more air in, but without a bigger volume in your intake manifold to receive the extra air, the air flow essentially gets choked before it has a chance to enter the engine. The Crawford Billet Power Blocks raise your intake manifold, lengthening the intake runners. This increases the volumetric efficiency of your manifold, which provides optimum airflow so that your engine receives as much air as your intake (OEM or aftermarket) can throw at it. Tested on and off our Dynapack Chassis Dyno, we stacked plates up then back down until we found the sweet spot that makes your FB20 engine scream (in a good way)!
@@Subie_OffXroad Do whatever you like, you sound clueless and have just read the marketing brochures - you have changed the air/fuel ratio without adjusting the cars stock tune to match it - that creates KNOCK and detonation.
@@SteveC-Aus lol. Cute. indeed I copy and pasted from CP. you’d think more “engines would go bang,” considering how many CP billet blocks have been put in crosstrek, outback’s and foresters. Lol. Have had it in for 20k miles and running like a champion. Stop being dramatic. I’ve done plenty of research. Not my first Subaru, 3rd, not my first time playing with the engine. I told you already, it has a high performance throttle response tuner; there is no need for it to be professionally tuned, the air ratio isn’t dramatic enough a change shit, and removing the blocks is just moronic.
I need to show this to my boss. When I put aftermarket mud flaps and crossbars on my Forester he said, "You're not turning into one of those weird Jeep people are you?" hahaha He ain't seen nothin yet.
Nah . I mean the RTT is 100 the shower is 20lbs. I don’t ride with it full. Skid plates are aluminum and light. Removed weight when the front bumper was added. Only weight is really the winch. Swing gate is 120lbs and awning is fairly light. I mean yea it’s heavier but no different then having 2 or 3 normal size humans riding with you.
This literally looks like you've installed every 3rd party accessory available on Amazon on this Forester. When I look at this , it reminds me of a hoarder
@@jkrollin3967 pay attention to the actual functional modifications, stupid. Crawford performance, LP aventure, RalliTek, ADF, BoxerOverland. Moron Clown 🖕🖕 You didn’t even watch the entire video just commented like an ignorant Kamala supporter.
@@Subie_OffXroad Your trying to hard man. 9/10 of the stuff on here you don't even need. The way you take negative feedback makes you look like a They/Them Liberal.
@ hahahaha says the libtard that talks shit on random people’s pages.. you are as dumb as my shoelace. That’s ok. Just tired of douche bag haters trynna be cool for hatin on a dope build. You tell me what I don’t need when I go on 4 day over landing trips… I’ll wait sweetheart. I’ll keep it simple for ya, kiddo. 3 3/4” lift, struts, sliders, skids, locker, breather extenders, billet blocks, bumper, winch. Tent awning shower. Kitchen slide out, fridge, battery, solar panel. 🤫🤫🖕🖕🖕🤡🤡🤡 Like I said, pay attention.. small accessories to be different.
@ you’re right I don’t need any of it. I want it and can afford it. I could drive a Honda Civic like you . Shut you stupid I’ll repeat myself; keep watching for the LCAs going in 😘😘
For sure. I have a quick video - I’ll go through a quick break through of how I installed. Took about 3 hours and my buddy who knows more about cars than I do haha
@@Subie_OffXroad you the man… btw they said it’s gonna be 2-3 weeks till mine comes in, but that means this weekend which I doubt. How far in advance did you find out yours was here? Also what would u recommend first absolute mods? Floor mats? Clear coat/ceramic? Tune/exhaust?
@@ImaYam it took a week or so to get mine I believe. But I ordered mine like a year and a half ago and it sat in my garage for several months before the install.
@@ImaYam I went with an exhaust for one of my first mods, I had exhaust on my old Forrester as well. But I was stuck with the wilderness floor mats. They seem to work well enough and I have not got a ceramic coating around the car, I didn’t know about that. And now I have pinstripes ha ha. but not a bad idea. If you are really going to take it out and play with it! I may wrap mine soon enough but that’s expensive af
Yessir! Mixsuper Custom Fit for Window Shade Subaru Forester 2019-2023 Folding Side Window Sunshade Sun Protection Glare and UV Visor Keep Your Vehicle Cool 6 PCS a.co/d/anxDrq2 Perfect fit for forester
I deleted that reply just a few minutes ago to not bash on perrin, but I got it to fit after calling them and making sure it was the right part before I stripped a bolt. It was an extremely tight fit and I had to put my car in the garage as I believe the incline of my driveway made it impossible to install. They also stated the OEM actually stretches slightly overtime which is why it is longer than the new part. Definitely noisier startup, and slightly better throttle response, but not really louder at all in normal driving. Definitely worth it to clear up some throttle lag!
It’s no race car but it drives great! It’s my everyday. And I usually don’t have EVERYTHING loaded unless I’m going out. Still get 22mpg highway.. around town closer to 15 but it is what it is. I’m sure the bronco badlands on 37s I just parked beside doesn’t get 30mpg haha ;)
I mean.. I’m not racing it haha. I’ll be honest I’d rather have lower gear ratio than more hp when crawling up the mountain kr through water but I haven’t had any power issues. I push her pretty hard in my trail riding videos
@@vilhelmstein2091 i’ve actually had the same conversation with a lot of people. Because the outback (non wilderness) has more horsepower with the turbo but the wilderness has the deeper and better/lower gear ratio for when going off-road. Look up HikeIT tuner. I bought and installed it, helps with much more responsive pedal/acceleration, or less when you are off-road.
It’s one on top of the other. I have the 1” and then I said screw it and added the other 3/8” they offer. I’ll share the video I have of me doing it.. 💪
@@jaredhilbrands oh no worries haha I love talking builds! I’m all over other peoples asking same questions haha. Yes I initially added 1” on both front and rear. Then 3/8” just on the back bc that was easier to do myself. Couple weeks later added the 3/8” to front so I have 1 3/8” spacer both front and rear including the 2” lift via the iron man suspension (c-kit) Total 3 3/8” lift Including 30-31” tires gives me 16” side ground clearance and with bumper about 24” in the front.
With all the lighting and everything else you have on it that’s drawing power, how do you manage without your battery draining? Did you upgrade your battery or did you add a secondary?
I don’t run the lights all the time, but I have the solar panel directly connected to batter and the Jackory. Most everything is ran off the jackery, except the light bars. Fridge, inside lights, any camping/exterior LED, all plugged up to the Jackory. I’ve only had to use my battery, jumpstart one time in the woods, and that’s when it was was cold I was just literally sitting in my car and wouldn’t turn over in the morning but quick jump and good to go!
@@Subie_OffXroad cool, I just put a bunch of lights on my OBW and everything is running off the blazer international wireless remote trigger. The only one that’s not on the blazer is the top light bar because it was too many amps for the blazer so I used the switch for that one and ran it through the firewall and put it in the empty slot next to the trunk release and it’s a perfect fit.
@@matthewowen5574 I have auxbeam. Yea for sure.. plenty of things I’ve had to figure out haha. Glad you got it working! That’s what makes it rewarding and uniquely yours; the small shit you know you had to do to make it perfect. I love it :)
Im a subi owner myself and have a lift plates and ats but.....at what point do you stop and think maybe I just should have bought a proper 4x4 with hi/lo box and locking diffs? I don't get why you would do this to a foz with a cvt and a 2.5 na engine you added a hell of a lot of weight to a underpowered car..... would love to see your gear box oil temps pulling all this crap up any kind of decent accent....
lol. It’s not they much weight. Cut off 150lbs, some added for sure but heavy load suspension, front and rear. Wilderness has lower ratio gear. I have a locker in the rear. My oil temps don’t go above 230, I have billet blocks and cut in air vents for more air flow. I’ll take a video if you don’t believe me. I ride it hard and have had zero problems of over heating ever.. and I follow “proper 4x4’s.” I also traded in my 2021 sport for this. Didn’t have 60k sitting around … This is exactly what I need, I’m not on Moab rock crawling. I’m in mud and dirt climbing mountains. Check out the most recent videos..
Not much, haha. It reduces chassis torque, let’s the suspension do little more work. But this is my everyday as well. Slightly stiffer chassis isn’t really gonna affect my off-road in because I’m not rock crawling. I mean I do push it pretty hard, but I’m not in Moab. Unlike double wishbone type suspension systems, MacPherson Strut assemblies are load-bearing on the top - where they’re connected to the body of your car. Because of this design, your strut tower undergoes extreme pressure while hard cornering or if you hit a bump at high speeds. This pressure is enough to offset and temporarily change the alignment of your car’s suspension geometry, making your car unpredictable in tight situations. Installing a strut bar helps to counteract this effect. In some cases, your suspension needs to function independently. Especially if off-road stability is important for you. For example, if you have a strut brace installed, and your front left wheel hits a bump, this effect will also be felt on the front right wheel. The same problem occurs with sway bars too. This isn’t ideal when it comes to driving off-road. You could lose traction when you need it the most and your ride will be uncomfortable. Strut bars redistribute tension between the left and right strut towers. All the force and pressure that is generated while driving gets shared evenly across your chassis. Because of this, the wear and tear associated with this pressure also get redistributed. Even wear is always a good thing.
@Subie_OffXroad I'd be curious about that too. Disconnecting the sway bars gives the car noticeably more flexibility, but I wonder how the effect would be different with a brace on top.
@@JamieUtah I do have my front sway bars disconnected. My rears are still in. One reason why I also put the strut bar in. But definitely have to remove it to be able to see if there’s a noticeable difference.
For the haters- we just work with what we have- everyone has different things going on in their life, you don’t know his circumstances… maybe he had a forester and just decided to make the most of it. As for me, I got a lot out of this video and found it really informative. I dont need as intense of a build, but i have a 65w hood panel and 100w panel on my roof cage: a 1500 WH battery to run a heater, tea kettle, and lights; I have a pedal commander as my throttle controller, and got the nameless air intake and HKS legamax muffler (quietest one I could find that is still louder than stock). I don’t think he needs a tune- the engine has low power to start with, and even changing the throttle response, it is still operating well within the parameters of the engine. Meaning, it would be comparable to if you were routinely just stepping harder on the pedal, but that’s all.
I appreciate it. Yes I don’t have $100,000 to throw into a jeep gladiator. I traded my 21 Forester sport in for this and just slowly building it for my adventures. Just planned 4 day 300 miler :) I love it and I appreciate the kind words.
Probably don’t need to tune youre right, but I did go ahead and buy a Thorton tuner chip. I don’t know if it’s helping but the car hasn’t exploded yet lol.
And the skids, sliders are necesssry.. have those my car would be rusting on a mountain right now, they’ve saved my ass several times.
Also the throttle controller really does help!
Wow, nice build, man!!! I am from Israel, and unfortunately, most of the parts you have are illegal here. Enjoy!
Definitely the best build I’ve seen on TH-cam and I’ve seen a ton of them. So envious
I appreciate it, don’t be envious, (it’s expensive and frustrating haha but a lot of fun) it’s been almost 3 years now and I’m still working on the bill. I appreciate it, my car has changed even since this video.
I need to put out a new one, but I do have the build list if interested - I love talking about building and overlanding.
The stock for lights look freakin awesome. I was wanting to cut my bumper but didn’t want to lose the fog lights. So that gave me an idea.
Yeah, you won’t lose them. They’ll just hang there so I just rerouted them and use some brackets I found on Amazon.
@@Subie_OffXroadwhat are the decals called around your door handles
@@RoamRoadless got those on eBay. Search carbon fiber forester door handle guards . I’m sure they will pop up
That’s a comprehensive build! I’d definitely be looking at a pro tune if you’ve started playing with air intakes etc, number 1 thing that will make a Subaru engine go bang.
Yeah, I haven’t had it professionally or truly tuned. I just have that auto tuner for a quicker response time. Any advice on where to go? Or can any shop do a real tune?
@@Subie_OffXroad in all honesty if I was you, the first thing I would be doing is putting the stock intake back on and getting rid of the billet blocks and going back to standard. There are no good tuning options, this isn't a performance motor and the benefit is so minimal it's just not worth blowing an engine over (not to mention you have no warranty coverage now either). Messing with the air intake mixture is a sure way to blow these motors up, have seen it before.
@@SteveC-Aus lol 1, no engine is going to be blown bc of a little more air intake. 2, it actually helps. 3, I’m not racing it. 4, it’s not out of tune nor does it actually need one.
Let’s go through it all:
Adds 15 HP / 22 TQ - No Tune Required
Improves Acceleration
Decreases Delay between Shifts with AT
Increases the Volumetric Efficiency of your Intake Manifold
Maximizes the Potential of Aftermarket Intakes
Naturally Aspirated (N/A) vehicles are starving for air without a turbo. Sure, an aftermarket Intake / Cold-Air Intake will bring more air in, but without a bigger volume in your intake manifold to receive the extra air, the air flow essentially gets choked before it has a chance to enter the engine.
The Crawford Billet Power Blocks raise your intake manifold, lengthening the intake runners. This increases the volumetric efficiency of your manifold, which provides optimum airflow so that your engine receives as much air as your intake (OEM or aftermarket) can throw at it.
Tested on and off our Dynapack Chassis Dyno, we stacked plates up then back down until we found the sweet spot that makes your FB20 engine scream (in a good way)!
@@Subie_OffXroad Do whatever you like, you sound clueless and have just read the marketing brochures - you have changed the air/fuel ratio without adjusting the cars stock tune to match it - that creates KNOCK and detonation.
@@SteveC-Aus lol. Cute. indeed I copy and pasted from CP. you’d think more “engines would go bang,” considering how many CP billet blocks have been put in crosstrek, outback’s and foresters. Lol.
Have had it in for 20k miles and running like a champion.
Stop being dramatic. I’ve done plenty of research. Not my first Subaru, 3rd, not my first time playing with the engine.
I told you already, it has a high performance throttle response tuner; there is no need for it to be professionally tuned, the air ratio isn’t dramatic enough a change shit, and removing the blocks is just moronic.
Nice setup, earned my sub. 👍
@@mikeb7441 I appreciate it man!! I actually have an updated modification video. Check it out. 🙌🙌
I need to show this to my boss. When I put aftermarket mud flaps and crossbars on my Forester he said, "You're not turning into one of those weird Jeep people are you?" hahaha He ain't seen nothin yet.
Hahahahah do it!!! Hahaha ;) #imawannabe 😜😊
Man that baby must weigh a lot!
Nah . I mean the RTT is 100 the shower is 20lbs. I don’t ride with it full. Skid plates are aluminum and light. Removed weight when the front bumper was added. Only weight is really the winch. Swing gate is 120lbs and awning is fairly light. I mean yea it’s heavier but no different then having 2 or 3 normal size humans riding with you.
This literally looks like you've installed every 3rd party accessory available on Amazon on this Forester.
When I look at this , it reminds me of a hoarder
@@jkrollin3967 pay attention to the actual functional modifications, stupid. Crawford performance, LP aventure, RalliTek, ADF, BoxerOverland.
Moron Clown 🖕🖕
You didn’t even watch the entire video just commented like an ignorant Kamala supporter.
@@jkrollin3967 keep watching - about to install new front lower control arms. 😘😘🖕🖕🖕
@@Subie_OffXroad Your trying to hard man. 9/10 of the stuff on here you don't even need.
The way you take negative feedback makes you look like a They/Them Liberal.
@ hahahaha says the libtard that talks shit on random people’s pages.. you are as dumb as my shoelace. That’s ok. Just tired of douche bag haters trynna be cool for hatin on a dope build.
You tell me what I don’t need when I go on 4 day over landing trips… I’ll wait sweetheart.
I’ll keep it simple for ya, kiddo.
3 3/4” lift, struts, sliders, skids, locker, breather extenders, billet blocks, bumper, winch. Tent awning shower.
Kitchen slide out, fridge, battery, solar panel.
🤫🤫🖕🖕🖕🤡🤡🤡
Like I said, pay attention..
small accessories to be different.
@ you’re right I don’t need any of it. I want it and can afford it. I could drive a Honda Civic like you . Shut you stupid
I’ll repeat myself; keep watching for the LCAs going in 😘😘
Nice Rig…
Thanks man !
nice house.
It’s an overland build. But yea, it’s gone away from home when I’m on the mountain.
Oh and thanks for subscribing
Oh and keep watching :)
Yo love it.
More info on the tune chop please?
For sure. I have a quick video - I’ll go through a quick break through of how I installed. Took about 3 hours and my buddy who knows more about cars than I do haha
th-cam.com/users/shortsOhb_aUvS4jE?si=6hPsvQqcHz1ke90E
@@Subie_OffXroad you the man… btw they said it’s gonna be 2-3 weeks till mine comes in, but that means this weekend which I doubt. How far in advance did you find out yours was here?
Also what would u recommend first absolute mods? Floor mats? Clear coat/ceramic? Tune/exhaust?
@@ImaYam it took a week or so to get mine I believe. But I ordered mine like a year and a half ago and it sat in my garage for several months before the install.
@@ImaYam I went with an exhaust for one of my first mods, I had exhaust on my old Forrester as well. But I was stuck with the wilderness floor mats. They seem to work well enough and I have not got a ceramic coating around the car, I didn’t know about that. And now I have pinstripes ha ha. but not a bad idea. If you are really going to take it out and play with it! I may wrap mine soon enough but that’s expensive af
Do you have a list somewhere with all the different parts you've put on?
Yes, I think. If not I’ll go ahead and do it right now. Ha I just got home from work so, why not.
Subscribe and I’ll tag you 💪🙌
- Full Force Metal Works High Clearance Hybrid Bumper
- Anvil 4,500 W/ Synthetic Rope
- 2x 8” Rough Country Bumper Lights
- Nilight 20” Light Bar Mounting Bracket
- Lensun Solar 65w Solar Panel W/ 20amp MPPT
- ASPL 29.5" 54 LED Strobe Light Bar Double Side
- Rhino Rack W/ 2x accessory bars
- AAIWA 14” 60w Light Bar
- 3x 48” INNO Cross Bars
- Muge Racing Oil Catch Can
- AEMA cool Air intake
- Crawford Performance Billet Blocks
- Torque Solutions Pitch Stop
- Torque Solutions Front & Rear Strut mounts
- Ironman 4x4 C-Spec 2” Suspension
- Anderson Design Fabrication 1 3/8” Strut Spacers
- Duralast Universal Racing Hood Vents
- Crawford Performance Rock Sliders
- LP Aventure MODIFIED Bumper
- LP Aventure FULL Skid Plates, Front & Rear
- Ironman 4x4 6ft Awning
- Yakima 7g Road Shower
- Baja Design Sport Squadron Ditch Lights
- 42” Rough Country Light Bar
- Dirtcom Trail Swing W/ drop down table & trail bracket
- Borla Cat-back Exhaust
-Nomad Kitchen LT Pantry
- Set Power Fridge Slide out
-Set Power pt45
- Orbis Overlanding 2x Rack Wings
-ADF Fire Extinguisher Bracket
- Kidde ABC Fire Extinguisher
- Rotopax 2x Two Gallon Water, 1x Three Gallon Gas, 1x Two Gallon Storage Pack
- Rock Slide, for Umbrella
- WeBoost Overland Cell Phone Booster
- Kumho Road Venture AT 52s 265/65/17
- Yeti Overland Blanket
- TJM USA Yulara Roof Top Tent
- OEM Rain & Bug Gaurds
- ECCPP 1.5” Wheel Spacers
- Alpine iLX-f309
- Vtoman Jump 1000 Battery & X7 Jump Starter
- Wanderlost Portable 3 Gallon Water Tank W/ Rechargeable Faucet
- HikeIt XS Premium Throttle Response
- Thorton Power Performance Chip Tuner, Stage 3
-NashFabCo Rear Ladder, Version 2 W/ roto pack swing mount and pivot side step
- Torxe 39” Tinted Sunroof Visor
- Tacticool 2x Car Seat Back Molle Organizer
- TACNEX Molle Panel Car Seat Headrest
- MOCHENT Dashboard Mats
- TintWorx 5% Tint all the way around
- Mixsuper Custom Fit Window Shade Subaru Forester
- CruxMoto Yellow Fog Light tint and rear wing Topography Pattern.
- OPT7 Rear Break LED Spoiler Light
- BUNKER INDUST. 4x 23” Traction Boards
- ALL-TOP 2x 42” Recovery Traction Boards
- Flame King 5lb Propane Tank
- Power Tank Propane Bracket
- MENSI Propane Quick Connect Adapter
- RhinoUSA 14pc Tire Repair Kit
- RhinoUSA Ultimate Survival Shovel and 3/4” D-Ring Shackles
You said you got the Windows screen blackouts on Amazon. I can never find the ones that you have here in the video. Do you have a link?
Yessir!
Mixsuper Custom Fit for Window Shade Subaru Forester 2019-2023 Folding Side Window Sunshade Sun Protection Glare and UV Visor Keep Your Vehicle Cool 6 PCS a.co/d/anxDrq2
Perfect fit for forester
I see you did a aftermarket pitch stop. Do you remember how large of a difference it made in the interior as well as the throttle response?
Night and day.
I highly recommended getting and installing one.
Little louder in the cabin but zero shake and much much faster throttle response
@@Subie_OffXroad I had actually already ordered one; I just needed to justify the purchase to myself. I'll get to see the difference next week!
@@ralkros681 it’s so worth it. Enjoy the install, it’s tight ha but not bad to do
Torque Solution® - Pitch Stop Mount more details on - www.carid.com/2022-subaru-forester-engine-parts/torque-solution-pitch-stop-mount-2485123921.html
I deleted that reply just a few minutes ago to not bash on perrin, but I got it to fit after calling them and making sure it was the right part before I stripped a bolt. It was an extremely tight fit and I had to put my car in the garage as I believe the incline of my driveway made it impossible to install. They also stated the OEM actually stretches slightly overtime which is why it is longer than the new part.
Definitely noisier startup, and slightly better throttle response, but not really louder at all in normal driving. Definitely worth it to clear up some throttle lag!
Wow what a great build!, you have this really tricked out. D you have a weight of the vehicle fully loaded and how does that effect the drive
It’s no race car but it drives great! It’s my everyday. And I usually don’t have EVERYTHING loaded unless I’m going out.
Still get 22mpg highway.. around town closer to 15 but it is what it is.
I’m sure the bronco badlands on 37s I just parked beside doesn’t get 30mpg haha ;)
I want to get an AEM CAI but not carb legal for us Californians even though it doesnt make a difference i still want it 😂
Do you have forester? Look up Takeda Cool Air Intake. They make them for outback and crosstreks and foresters before 2019.
@Subie_OffXroad I have a 2020 Sport haven't found a legit brand besides AEM but theirs isn't CARB
@@AsapKimchi yea, AEM may be the only way to go.
@Subie_OffXroad I could just buy and run it but would have to take it off if I took my.car to dealership hahaha
What spacers are you running?
2” iron man c-kit suspension with Anderson design fab 1 3/8” spacers.
They are cheap and highly recommend . Have had them in several Subies
What brand solar panel do you have on the hood?
This is 65w Lensun Solar panel. With 20amp MPPT controller
They have one specific for OBW :)
How much weight do you have on your roof man?!
@@huup4389 rack and tent is 130. Shower and awning is 65
Ladder is 15. Not as much as people think.
Has it felt like its underpowered at any point?
I mean.. I’m not racing it haha. I’ll be honest I’d rather have lower gear ratio than more hp when crawling up the mountain kr through water but I haven’t had any power issues.
I push her pretty hard in my trail riding videos
@Subie_OffXroad that's good to hear, this is most likely the one I'll get
@@vilhelmstein2091 i’ve actually had the same conversation with a lot of people. Because the outback (non wilderness) has more horsepower with the turbo but the wilderness has the deeper and better/lower gear ratio for when going off-road.
Look up HikeIT tuner.
I bought and installed it, helps with much more responsive pedal/acceleration, or less when you are off-road.
The spacer u have on rear rear is it one pice or two pice spacer because i cant find it in adf website 1 3/8 and the front is it just one inch spacer?
It’s one on top of the other.
I have the 1” and then I said screw it and added the other 3/8” they offer. I’ll share the video I have of me doing it.. 💪
th-cam.com/users/shortsZP3bOgqoBxQ?si=NZmm0PEiwPq1MDEJ
@@Subie_OffXroadso u have 1/38 front and 1 3/8 back too ? Sorry if u covered it ori miss somthing ur build is sick
@@jaredhilbrands oh no worries haha I love talking builds! I’m all over other peoples asking same questions haha.
Yes I initially added 1” on both front and rear.
Then 3/8” just on the back bc that was easier to do myself. Couple weeks later added the 3/8” to front so I have 1 3/8” spacer both front and rear including the 2” lift via the iron man suspension (c-kit)
Total 3 3/8” lift
Including 30-31” tires gives me 16” side ground clearance and with bumper about 24” in the front.
Got it thanks for the info
nice use of 65k cad.
65k?
Pocket change.
I appreciate it… I’ll use my money however I want. Smh
@darthlungs thanks- I’ll spend my money how I want.
🤣🤣😂😂🖕🖕#bitcoin 🤷🏽
With all the lighting and everything else you have on it that’s drawing power, how do you manage without your battery draining? Did you upgrade your battery or did you add a secondary?
I don’t run the lights all the time, but I have the solar panel directly connected to batter and the Jackory.
Most everything is ran off the jackery, except the light bars.
Fridge, inside lights, any camping/exterior LED, all plugged up to the Jackory.
I’ve only had to use my battery, jumpstart one time in the woods, and that’s when it was was cold I was just literally sitting in my car and wouldn’t turn over in the morning but quick jump and good to go!
Great question :)
@@Subie_OffXroad cool, I just put a bunch of lights on my OBW and everything is running off the blazer international wireless remote trigger. The only one that’s not on the blazer is the top light bar because it was too many amps for the blazer so I used the switch for that one and ran it through the firewall and put it in the empty slot next to the trunk release and it’s a perfect fit.
@@matthewowen5574 I have auxbeam.
Yea for sure.. plenty of things I’ve had to figure out haha. Glad you got it working! That’s what makes it rewarding and uniquely yours; the small shit you know you had to do to make it perfect. I love it :)
Im a subi owner myself and have a lift plates and ats but.....at what point do you stop and think maybe I just should have bought a proper 4x4 with hi/lo box and locking diffs? I don't get why you would do this to a foz with a cvt and a 2.5 na engine you added a hell of a lot of weight to a underpowered car..... would love to see your gear box oil temps pulling all this crap up any kind of decent accent....
lol. It’s not they much weight. Cut off 150lbs, some added for sure but heavy load suspension, front and rear. Wilderness has lower ratio gear.
I have a locker in the rear.
My oil temps don’t go above 230, I have billet blocks and cut in air vents for more air flow.
I’ll take a video if you don’t believe me. I ride it hard and have had zero problems of over heating ever.. and I follow “proper 4x4’s.”
I also traded in my 2021 sport for this.
Didn’t have 60k sitting around …
This is exactly what I need, I’m not on Moab rock crawling. I’m in mud and dirt climbing mountains.
Check out the most recent videos..
But with that being said.. one day I will own a nice giant 4x4 crawler
Plz more info solarpanel
I’ll make a video about the Solar Panel tomorrow.
Lensun Solar
What is the point of a strut bar on an offroad buid?
Not much, haha. It reduces chassis torque, let’s the suspension do little more work. But this is my everyday as well. Slightly stiffer chassis isn’t really gonna affect my off-road in because I’m not rock crawling. I mean I do push it pretty hard, but I’m not in Moab.
Unlike double wishbone type suspension systems, MacPherson Strut assemblies are load-bearing on the top - where they’re connected to the body of your car.
Because of this design, your strut tower undergoes extreme pressure while hard cornering or if you hit a bump at high speeds. This pressure is enough to offset and temporarily change the alignment of your car’s suspension geometry, making your car unpredictable in tight situations. Installing a strut bar helps to counteract this effect.
In some cases, your suspension needs to function independently. Especially if off-road stability is important for you.
For example, if you have a strut brace installed, and your front left wheel hits a bump, this effect will also be felt on the front right wheel. The same problem occurs with sway bars too.
This isn’t ideal when it comes to driving off-road. You could lose traction when you need it the most and your ride will be uncomfortable.
Strut bars redistribute tension between the left and right strut towers. All the force and pressure that is generated while driving gets shared evenly across your chassis.
Because of this, the wear and tear associated with this pressure also get redistributed. Even wear is always a good thing.
Follow up: I’m very tempted to take it out to see if there is a noticeable difference in traction and flexion while playing in the mud/rocks.
@Subie_OffXroad I'd be curious about that too. Disconnecting the sway bars gives the car noticeably more flexibility, but I wonder how the effect would be different with a brace on top.
@@JamieUtah I do have my front sway bars disconnected. My rears are still in.
One reason why I also put the strut bar in. But definitely have to remove it to be able to see if there’s a noticeable difference.
th-cam.com/users/shortsfRYSm4CrhtE?si=MJjEaeuKb4xeY-sq
u still get 25+ mpg with these mods?
Highway, yes, anywhere from 22-26.
Around town, 15mpg. But it is what it is. I didn’t expect to keep 25mpg with 3.5” lift and 31s
sad little man disabling dislikes.
?? What
Meth build
Ahhhhhh someone jealous they can’t afford it?
Go back to bed you cuck bitch.
@@Truckdriverdivorcee jealous cuck boy
@ yeah super jealous of your dyke car turned into a pile of shit