ฝัง
- เผยแพร่เมื่อ 2 ส.ค. 2024
- Support DATfpv for all his hard work:
www.buymeacoffee.com/datfpv
www.paypal.com/donate?hosted_...
paypal.me/datfpv
instagram: / datfpv
tiktok: / datfpv
facebook: / datfpv
twitter: / datfpv
Join my Channel: / @datfpv
How to Bind the Tinyhawk Freestyle II (2) and any Emax Hawk, this video will show you how to bind your tinyhawk if you are having issues with the bind procedure via the button using the betafpv literadio 2 as an example.
buy emax tinyhawk freestyle 2 (affiliate link):
www.banggood.com/Emax-Tinyhaw...
We will be using Betaflight CLI commands: bind_rx
Other videos:
Change protocol:
• BetaFPV LiteRadio 2 us...
Tinyhawk betaflight:
• Emax Tinyhawk Freestyl...
Fix the Controller / receiver tab:
• Radio Sticks Don’t Mat...
Help and Support DATfpv:
/ datfpv
Dude thank you so much I was about to give up I was pressing the boot button all this time was getting ready to send my tinyhawk 3 plus freestyle back which this also works with thank you you legend
liked and subbed:) this was really helpful and super beginner friendly especially for me starting off fpv ❤
thank you so much for these videos! truly helpful as a beginner!
You're welcome! hit that subscribe!
this was very helpful I love your content
Just watched your video on this to as I just bought one…. Just gone to check tinyhawk 2 freestyle and here we’re are again 😂😂 ❤thanks for the content
Have fun!
Thanks. I'm hoping the Betafpv controller's D8 capability will fix my Tinyhawk 2 problems. The controller will be delivered today and thanks to your help I know just what to do when it gets here.
also check out the playlist: th-cam.com/play/PLA4m2I1pGdvDhBViN0n1jvBAdac2R7MJ-.html
thanks
Hey Dat I'm totally in your debt mate. I bought this kit last year and didn't know what the hell D8 and D 16 was and thought I'd bought the wrong controller. I even bought a new rtx to go on the quad to make it work with my lite radio 2. All I had to do was go through the process of switching it over to D8 and the bind process worked great. Can't thank you enough. I look forward to many minutes of crashing now 🤣 thankyou so much.
happy it helped mate, you'll have plenty of crashes! its all part of it just don't give up
ok i subbed because this is the best channel on youtube
thanks man...!!!!
big help thanks mate !!
thank you!
Thanks for the help! Actually would save me a lot of frustration cus Im ordering the lite radio 2 SE. :)
Edit: grammar
glad it all helped you out
you're the man, thanks
Glad to help, remember to sub!
Thank you! All bound up to my freestyle 2 and tinyhawk 2 ! Now I need some better goggles than the stock rtf emax box gogs
have you bought the new goggles?
Great video thanks
glad you liked, remember to subscribe! thanks
Great Video :D
thanks man, don't forget to subscribe!
Thumbs up and subscribed!!!
Awesome thank you!
I had a hard time binding until I use batafight and the code thank you Thumbs up
glad it helped you out, remember to subscribe! thanks
Can you do a video on the iflight baby nazgul and the if8-e radio
Quick q. Im just new and will be purchasing it. Will i bind it again if i change new battery or end the day and fly for tomorrow?
Subed and liked. Thank you.
Thanks for the sub! hope it all helped!
yeah thank you back to the video at last
Very Nice!
Thanks Much!
Aloha
Thank you! Cheers! hope it helped you out
Tut on how to bind the tiny hawk / freestyle with e8 transmitter emax
Thanks for the video... got my lil tinyhawk 2 all setup! What are the little blue extensions on your controller sticks? And where did you get them? TIA...
Hey, hope the vid helped, they are stickends: remember to subscribe! - check the vid out about them:
th-cam.com/video/e4JV5KXRg04h/w-d-xo.htmlttps://th-cam.com/video/e4JV5KXRg04/w-d-xo.html
@@Datfpv Thanks! I ordered a set off of amazon. I got them yesterday, and they might quite possibly be the best $10 I have spent in my RC journey... lol... After over a decade on box style radios, I was having issues with the Xbox style controller. These things make life much easier!!!
Hi ya! I have a question please, my ocd reads "rssi low" but im not sure how to bypass this
Please help
Cheers
Fyi The first button on top is vtx button use for unlock 25 mw to real 200mw vtx.
if you press that button and power the quad - its the boot button.. it puts the quad in dfu mode for flashing firmware.
Hey man, I bound it to the beta FPv controller, however, the switches are reversed, the top left one needs to be flicked down to start the drone (turn the props on).
Just move the slider to the part when the switched is flicked
Can you bind any drone this way? Eg; Thinhawk3 plus freestyle?🤔
Also, how do you angle the camera down? Thanks!
There are two screws on the side loosen them move the angle then tighten them again hope this helps😁
I really want to learn how to bind the tinyhawk freestyle 2 with tinyhawk 3 rtf kit
it should be the same process.
I subbed because you told me to buy that radio. can you make the sticks longer by adjusting the set screw up? my radio arrives tomorrow.
Hi and thanks, yes you can extend the sticks they can be adjusted, you can also add stick end to the as well: th-cam.com/video/e4JV5KXRg04/w-d-xo.html
playlist at: th-cam.com/play/PLA4m2I1pGdvDhBViN0n1jvBAdac2R7MJ-.html
@@Datfpv thanks brother
Hahahah I've been trying to figure it out for hours. The button is on the bottom! Of course!
I'm glad it helped though! thanks
after i plug in the batteries is flashes red, blue and green for 5seconds and then only red, when i click the bind button it doesnt react :(((
Hey man! Question!? I was flying my tinyhawk freestyle 2 and crashed and broke that connector for the camera ON THE FC side I tried to direct solder to the board without the connector but those got ripped off again! And it was a pain to solder! I’ve heard it’s a known issue!:/ is there any other pads I can solder those 3 wires to? Which is the yellow wire signal I believe and positive and negative? Any input would be greatly appreciated! If not I won’t have FPV and would only have to fly LOS:/
Hi man, don't sound good to me :( I know there are pads for adding your own receiver on the board, you might be able to make them do the cam in betaflight? if you can or not I'm really not sure to be honest with you :( worth a google though...
I liked and subscribed. Now... May I be a burden and ask where you purchased those awesome thumb sticks? And what model of transmitter do I order for?
Thanks.
Hi - thanks for the sub! the controller is this one:
quad7.co.uk/product/betafpv-lite-radio-2-radio-transmitter-2-8g-game-pad-style-controller/
make sure its the 'frsky' version, thats the version I use and works with all the hawks etc.
and these are the stick ends, just make sure the size is 'M3' and they will fit:
www.robotbirds.co.uk/radio-equipment-all/frsky-2-4gz-systems/taranis-spares/frsky-alu-m3-gimbal-stick-end-grand-lotus-gold-18396.html
@@Datfpv oh sweet! I didn't know BetaFPV made the sticks too.. I have both Bayang and FRSKY lite radio 1's.
I appreciate the reply.
Have a great New Year!🎉
@@Datfpv Oh, I see my confusion. I was searching for the stick ends for the Lite Radios when I should have been looking for Taranis stick ends. That explains it all.
And I appreciate the link but "Stock: Out of Stock".
Besides I'm in California. I'll search for that here.
Again, thank you for your time and help... And clearing up my confusion.
I have a problem with my tinyhawk2, I binded it with the radio, and on betaflight I can see the switches and input actions as gas, yaw pitch and roll working, I also added the arm control, and other 2 as I see in videos, but then, if I power it up with the radio binded it doesn't fly, althought the leds blink wile giving inputs from the radio (that shows that the binding is correct) the props don't spin, it is not working.... can you help??
What type aftermath gimbals on the radio? I have the se version
its these ones: th-cam.com/video/e4JV5KXRg04/w-d-xo.html
What about binding to the turnigy evolution tx?
never done it mate sorry :(
What if I don't get a solid blue light even after the CLI command?
Hi - sounds like something is a miss.. have you done anything to it or is this the first time? - make sure your betaflight version is upto date... when you connect to betaflight does the 3d image move when you move the hawk?
I have the lite radio 2 and I have it binded and it’s connecting but when I go to arm the qwad it doesn’t do anything and the led lights start flashing. Osd of my googles say throttle when it supposed to be armed but nothing is happening
Hi - it will be more than likely your sticks are set wrong.. check out this vid: th-cam.com/video/7ZUe-sC7mmU/w-d-xo.html and remember to subscribe! thanks
I have it bind to the tiny hawk 2 but the switch on the Betafpv literadio 2 se controller aren’t working properly the beeper is working on the right top switch I think when it’s clicked either once or twice it starts the beeper on the drone so the switches aren’t working other than getting the beeper on the drone engage one of the switches on the right side I can’t get the motors to start up or anything but it must be bound because it’s letting the drone beep can you tell me what to do using the Betafpv light radio 2 se?
its your sticks, you can adjust them in betaflight, check this vid out :
th-cam.com/video/7ZUe-sC7mmU/w-d-xo.html
Can you bind that controller with the emax tinyhawk the 1s brushless. I bought the kit but I want to upgrade my radio
Hi - yes you can, as long as you buy the frsky version.
@@Datfpv do you use the frsky version right now on this video ?
many thanks.....USB Data cable important.....EMAX cable that comes with drone is not a data cable??
NO CABLE COMES WITH THE DRONE / EMAX QUADS... AT ALL... EVER... I BUY DIRECT FROM EMAX MYSELF, NO CABLE SUPPLIED.
Hi, i have same quad and buy this radio. But after Radiomaster t16s, quad controled by betafpv lite radio turns twice faster. In simulator i have same problem. Stick travel both radios almost the same. Rates - dont changes. Whats its can be?
it must be something to do with the stick travel, and gimbals it must be, if everything else is the same..
Can this drone be bind to a spektrum transmitter??
these ship with d8 frsky receivers in them... you could swap out the receiver to a speci one ?
I just reseaved my tinyhawk and that controller and I was pressing that small button on the top and it wasnt working lol no wonder why and also i was trying to take my 1s lipo out and the wired came out of the connector and now its broke. Is there a certain way u gotta put them in?
Hi - glad the vid helped, the batteries do have a correct way to be put in, they have marks and groves on them and should only go in one way anyway.
Datfpv thank you so much ur a small channel but I just subbed and turned on post notifications
thank you! - I haven't been going that long and trying to grow as much as poss
You can also take a complete "how to become a total nerd just to make a drone fly"! It is a 12 year course and then you might eventually be looking at the possibility of joining the hobby!
Lol. Where I’m currently at. Haha
Can I also use eachine literadio?
if it is frsky and has d8 then yes
Can I do it with the race
yes it should work with all emax quads
Why did you buy a second TH2 freestyle? Did the first one fail on you
No mate i have a little online shop I try to sell fpv gear and quads... quad7.co.uk thats mine
Finally got a solid light but no flight? Do i have to configure all the commands?
Hi - the controller and hawk pretty much come set-up but you do need to check things are correct and working - the main think with the controller is the 'receiver' tab in betaflight make sure the sticks are doing the correct thing, see my video: th-cam.com/video/7ZUe-sC7mmU/w-d-xo.html
@@Datfpv Thanks for the help, but now I have another problem. As soon as the drone flies up it kills the throttle and falls to the ground , not more than a foot up too, again and again I would appreciate the extra help and thanks again
is this you killing the throttle? - if iyt arms and flies things are working.. without seeing what is happening and your complete set-up it will be impossible to say what is happening.
@@Datfpv I dont think so unless i am just that ignorant to the whole deal as a i am a newbie flyer I click an auxillary and the wings begin to spin, i apply the throttle, the drone shoots upward with a spinning motion and falls to the ground
have to ask... check out the receiver tab in betaflight its one that gets missed, I have a vid: th-cam.com/video/7ZUe-sC7mmU/w-d-xo.html
I cannot get this quad to bind to the LiteRadio2 SE (new version) in D8 protocol no matter what I do. I have tried different firmwares in betaflight, have reset to orginal stock settings. The radio blinks three times confirming it's in D8, but for whatever reason, the quad refuses to bind to D8. It will only bind to D16, but emax does not recommend D16. I have no idea how to get this thing to bind to D8.
hey - I haven't got the SE version as yet, but I don't think it would be that different so it should bind ok... does the controller bind to other quads? is it just the freestyle? have you done th cli command lind to try and bind it? have you messed a setting up flashing firmware?
Same issue here. Betaflight recognizes the tinyhawk 2 but no bind. Protocol 8 on the se. Would love some help. Thanks for your videos!
@@jeremyblattner7933 if you did / followed the vid then it maybe actually bound, but you might have a set-up issue, check this vid out : th-cam.com/video/7ZUe-sC7mmU/w-d-xo.html
Thanks for the reply! I am seeing the issue now is that neither the bind_rx on cli nor the bind button change any lights on the tinyhawk 2. It remains red and blue flashing. So the radio can’t bind anyway. Betaflight recognizes the drone though. motors turn, etc.
@@jeremyblattner7933 so it must be bound, but you had a set-up issue in betaflight, - connect the controller and see if things move in the receiver tab - also if you have it connected via usb it won't arm.
Anyone unable to get the betafpv radio light to switch to d8 mode? Holding the bind button down while powering up the controller as the manual says, doesn't work.
hi mate, are you sure you have the frsky version? or is this the controller from a starter kit?? if its from the starter kit you can't use it with emax quads...
@@Datfpv I have the frsky version, not from a starter kit. Also my drone doesn't just straight connect in Betaflight, what did you have to do first for that to connect?
th-cam.com/video/GMXLffuxZpk/w-d-xo.html you have to repeat the process to get to d8 mode - 3 pink flashes. What quad do you have? - if you are having issues connecting to beatflight its normally a driver issue on your computer... on the start-up screen of betaflight there are links to the drives needed / and download links.
I've got the same quad and controller as you. I was using the drivers from silLabs and using the other link fixed it. I can bind but now I just get constant beeping from the drone. The blink patterns change though when I flip switches
th-cam.com/video/7ZUe-sC7mmU/w-d-xo.html it will be this its always this... remember to say thanks and hit that subscribe lol
Is this process the same also for the tinyhawk 2
Hi - yes its the same for pretty much all the hawks, you should be good to follow this, thanks
No no thank you sir
Awesome video. Question. I literally just recieved my THF2. I'm trying to bind it to my lite radio 2 but everytime I push and hold the bind and power button it just flashes rapidly on the controller but it's not binding to the THF2. I have a solid blue light and throttle is down. Any help would be greatly appreciated
Hi - the radio needs to be in d8 mode, you press the bind button on the bottom of the hawk, then the bind button on the back of the radio, you'll notice lights change on the hawk.. disconnect the battery from the hawk, then put the battery in again - see if its connected it shoiuld be... if it doesn't arm it will be some other issue - you will see the red light flash if you move switches on your radio... check out my other vids for more info etc, thanks
@@Datfpv thanks for getting back to me. I found out that I have the bayang version and not the d8/d16 version. So now I'm stuck flying my planes in Ely Nevada this weekend lol. Stay safe out there bud
@@riveraelliott25 that sucks man, you'll need the frsky version really... its the most widely used receiver I'd say
@Gregory Dahl yeah I've been figured it out lol but I appreciate the reply!!! No my only problem is is that the controller makes the drone flip. It says I have to calibrate the controller but I am not able to understand the formula lol never was good at math lmao
I’ve tryed this for afew hours now and I’m not getting any where. I don’t know if this is my controller or what but it won’t bind. It’s the betafpv
hey mate, I have a problem wirth the new aio board and xm+ I just installed in my quad. Radio and receiver are bound up but nothing shows up in betaflight transmitter tab :(
In the Config I set it to serial receiver and sbus (the xm+ is wired to sbus as well of course) and I tried both uart 1 and uart 2 with no success..
Any Ideas on what I can try?
is this on your hawk?
@@Datfpv yeah it is. Everything else works now and I did manage to reuse the original VTX.
have you set-up the UART up in the ports tab?
@@Datfpv Yeah I've tried both UART1 and UART2 (I have to activate the switch at ''serial reciever'' right?)
have you changed the config to serial based receiver (sbus)
Can I do it with the emax babyhawk r pro 4 please reply it will mean the world please to the guy who reply please
I don't know is my answer - I think they are different fc in them than the whoops / tinyhawks.
😭😭😭😭😭😭😔😔😟😟 I am sad
Very
I don't know what to do now I still didn't buy it but I don't know I very sad can you try it please and make a vid I don't want to get in to youtube please
quickly i have not bought the drone yet because i have seen the controller in the RTF kit is hot garbage. Im trying to get in the hobby with emax and i do not know if the batteries come with the drone itself and not only in the RTF kit, please let me know if you can.
normally there are a couple of batteries in the kit - just double check the listing specs.
Thank you for the reply, will do
WTFH! THE BOOT BUTTON!
the boot button is for dfu mode and re-flashing firmware on the flight controller if required
Não entendi nada.
?
Still not working >:/
Erm...My Tinyhawk Freestyle 2 came with a USB cable to charge the controller and headset battery. I wasted a good few minutes trying to connect it to my PC with that cable.
I am currently having a really weird argument with Bangood who sent me the wrong replacement controller for my EZ Pilot. I know its the wrong controller because it binds to the Freestyle after I followed your instructions and it has an aerial and the EZ pilot controller does not.
Any idea if it is possible to flash a normal Emax controller to work with an EZ Pilot or where I can get a EZ Pilot controller quickly?
you mean the ready to fly kit - this vid is about the single quad... not the kit - all their single quads don't come with cables.
you talk way too much this should have been a 2 minute video
first time someone has said I talk to much! thanks mate