I own a Valk 3, Weilong GTS, Go Guan and even a thunderclap, but my main cube is strangely enough, a MF3RS! The feel to it is amazing and not only would I recommend it to new cubers, but also amateur and professional speed cubers. I have set all my Pbs on it, including an 11.83 single and 14.8 average! I would definitely recommend this cube to any cuber!!
Thomas Vassil Brcic wow! the that is so odd! if you know anyone with a valk, it's usually their main but not in this case. I ordered a warrior w as my first speedcube and it feels like how I feel a valk is😂😂😂😂
The warrior W and the Valk 3 are almoast identical with their pieces. You can switch the pieces around and they will still work fine. The valk just has a little better corner cutting.
SpeedCubeReview Am I missing something? I've got both puzzles next to me and I can switch the pieces around and the puzzles are still solveable and can still cornercut. Even the center caps fit on both puzzles.
Oh thank u! Actually I was in a budget time, I bought MF3RS unexpectedly cuz I'm not familiar with brands.. but when I show it to my frnds they said I got the right one.. finally I've started to learn CFOP using MF3RS and now I can solve it within 30 seconds...:):):):):):):)
SpeedCubeReview man I really want a magnetic cube expecially the gans air. is it possible for you to personally sell me a magnetic Gans air but if not then it's ok
Even a top of the line cube is fine for a beginner. A GuanLong can be solved under 10 seconds on that same note. It’s a fine cube and I have many of them that I use.
Please upload some walkthrough solves if you can. You are good at explaining.You can make 2 playlist, for fast solvers fast explanation and advanced algs, and for beginners slow explanations, That can help you attract most of the cubing community people. Because you deserve more attention than other youtubers.Thank you😃
+Sumit Mandlik I walkthrough a sub-10 solve in my video going over learning new methods at the very beginning of September. I have been avoiding walkthrough for regular 3x3 because many more advanced people like Feliks do that.
SpeedCubeReview Just because feliks does, it doesnt mean others should stop uploading. It is always good in adding values. You have ability to do that as per my point of view. Just wanted to make this point. Your decision. Thank you😃
Everyone get Qiyi warrior w, it’s the best out of them all! The frosted surface isn’t bad at all! It’s amaaaaazing, feels expensive looks thought solid but so graceful!
+Nicholas Purple Elephant Most cubes are pretty similar. Even something like GTS, or MeiYing stickers should be good. You can always contact a shop like SCS and ask Cameron.
i had a YJ Sulong which was good but doesn't corner cut that much. i lubed it with maru I think I out 2 drops on white side and yellow side and it was really good but still doesn's corner cut that much now it was my back backup main my main is the Gans Macaron Purple
after owning solely an aolong v2 for 2 months, I decided to buy the Kung Fu Longyoun, the Warrior W, and the MF3rs. So excited for when they get here, I was starting to get a little bored with the aolong tbh. it's a great cube but I kinda ruined it by overlubing it and whatnot
I like to call the MF3S the Guanlong V2 and the MF3RS the Guanlong GTS. Edit: On a side note, I wonder if MoYu would have made more sales if they called them that.
Hey, I just got my Gans 356s v2 in the mail. I would like to get a set of springs to change up the tensions on it and see what I like so what kind of springs should it get? When I looked up Gans springs I always see the GES Spring Set but I would like to confirm whether or not it would work for it cause I know there are some springs for certain cubes like the new Gans cubes which I think use the GES
The GES springs do not work with the air. You need this spring set (bit.ly/2jpvRcA) The numbers correspond with the 4 GES springs. I prefer tighter tensions and use the S7 springs but many people like lighter and use the S9 springs.
SpeedCubeReview Yeah I agree the weight doesn't really make the difference for me as long as it isn't too heavy it's fine for me. I quite enjoy mine because of how smooth it is and the corner cutting is amazing, almost line to line reverse cutting
i feel like a point that would be valid especially on this one is modding. a big reason people get cheap 3X3 is modding, they rather pay 4 dollars for a cube they going to cut or glue stuff or mod, then a 15 dollar one. not all of this are good for modding but still, this need to be said. I understand that you're may be not the one most expert on modding, but any saying would be great (my suggestion, go for the guanlong. it has the best pieces for that). still, great video. thanks
SpeedCubeReview I watched the video thrice, and I came to a conclusion of buying MF3RS which I guess will be better in comparison to Warrior W and YJ Yulong. Thank you!!!
I got my first speed 3x3 last year. I know it is a qiyi cube but I don't know which one. I know that it is not a sail, thunderclap, or bullfight. I think it is the regular warrior but I don't know for sure. How can I find out
I'm just starting into 3x3 and I used (he doesn't let me use it anymore) my brothers horrible, barely turnable, non lubed rubiks brand. Like I said I'm just getting into 3x3 and I need a good cube under 15. Any suggestions?
Yukio Hiruma thunderclap has the best performance in all of them in my opinion because I own all the cubes you prefer but it cost $9 so it's not that much of a budget cube but it still cost low despite of it's performance.
+skcuber 1 No such thing. ALL cubes can lock up and it's caused by inaccurate turning by the cuber. All puzzles shown can be used for sub-10 second solvers.
+Cubero Anonimo there is never a "best". I go over good budget ones in my 4 x 4 mega comparison. I just beat my personal best with a mini cyclone boys FeiTeng. But that puzzle I added magnets to and the mini size might not fit everyone's preference.
maaaan i was thinking to buy thunderclap but now with this i don't know, liked the mf3rs looks like it corner cuts better but the qiyi warrior sounds more premium.
Both. It can be an advantage allowing for more movement and often cornercutting. It can be a disadvantage because it can feel uncontrollable and often cause locking more if you end up being more rough in your turning. I often like cubes to be a little less flexible because I like that stable feeling. Often it is more of a matter of preference but for those starting out a more stable cube is easier to work with.
+SpeedCubeReview Flexing is inversely proportional to stability!! And i like stable cubes . So kung fu or warrior w will be my choice. Can u please tell me whch cube s logo is removable as i just learnt blind solving by ur tutorial and noah s tutorial. And i need an offical blind main!! And a budget one (bcoz i don't have that much money). Thanks in advance!
If there is any logo that is printed on it's still fine to use for blind. The issue is having a second sticker on top of the regular sticker allowing you to feel a difference in that piece.
+manwhale romeman you could be over in a minute or under 10 seconds and still using this puzzle. It's a great puzzle and not anything you should be upset about
+rochan singh ALL cubes lock up if you are rough or inaccurate at turning. There are fast cubers who have used Thunderclap and those who have used he MF3rs as a main. It's not a top pick for most compared to other ones out there today.
+Ivan Chan On their own they will have the same idea. They often come from he Factory with different amounts of lubrication on them already. I felt it would be unfair to just judge a cube without any adjustments at all a since the whole idea of speed cubes is that they are adjustable.
Kungfu 0:36
Qiyi 1:29
Moyu/MF 2:49
Shengshou 4:13
YJ 5:03
Yuxin Fire 6:02
SpeedCubeReview sorry late
Real Cuber again you are so helpful
HaozhenGames Roblox and more Thank you :)
Real Cuber thank you
Ram Thakkar Cubingcpe you're welcome
I own a Valk 3, Weilong GTS, Go Guan and even a thunderclap, but my main cube is strangely enough, a MF3RS! The feel to it is amazing and not only would I recommend it to new cubers, but also amateur and professional speed cubers. I have set all my Pbs on it, including an 11.83 single and 14.8 average! I would definitely recommend this cube to any cuber!!
Thomas Vassil Brcic wow! the that is so odd! if you know anyone with a valk, it's usually their main but not in this case. I ordered a warrior w as my first speedcube and it feels like how I feel a valk is😂😂😂😂
The warrior W and the Valk 3 are almoast identical with their pieces. You can switch the pieces around and they will still work fine. The valk just has a little better corner cutting.
SpeedCubeReview Am I missing something? I've got both puzzles next to me and I can switch the pieces around and the puzzles are still solveable and can still cornercut. Even the center caps fit on both puzzles.
+Andor Engelberts You can put one piece in the other but I was referring to them being identical. They are very different performing puzzles.
+Andor Engelberts I misspoke about the pieces being swappable. They just are not near the same performance as each other.
I would get the MF3RS because that logo in combination with the stickerless shades looks SO BEAUTIFUL
Oh thank u! Actually I was in a budget time, I bought MF3RS unexpectedly cuz I'm not familiar with brands.. but when I show it to my frnds they said I got the right one.. finally I've started to learn CFOP using MF3RS and now I can solve it within 30 seconds...:):):):):):):)
I like how you pronounced shenshou. The *real* way. The *Chinese* way. It's just so satisfying. MoFangGe on the other hand...
you have to say though, the Kungfu comes with a stand^^
+FinnCubed True
SpeedCubeReview man I really want a magnetic cube expecially the gans air. is it possible for you to personally sell me a magnetic Gans air but if not then it's ok
just magnetize it yourself. Where's the problem?
Xander Manabat speedcubeshop sells a kit for like 8$ to magnetize any cube. comes with 50 magnets, glue, and an instruction booklet
got a new pb while watching this video (18.56 Weilong GTS)... so satisfied :)))))))))
+Jurij schönfeld woot. Just keep the video constantly on loop!
watch out Feliks, I'm comming ;)
Great! :D I got my pb this week while watching YouCubers aswell! :D 16.20 :)
Jurij schönfeld got a 12.867 within an hour of opening my Weilong GTS M ( I average 19ish )
I got a 10.07 pb after about 2 hours after unboxing the KungFu Longyuan
I like cats. I will name my children cat. I will call you cat, cat.
- Cat
Pacstard doge traitor.
I eat cats.
Andreas Lambropoulos are u Asian
jk
i am thinking to get YJ GuanLong 3x3 Cube Black ,Is it a good for beginner like me?
Even a top of the line cube is fine for a beginner. A GuanLong can be solved under 10 seconds on that same note. It’s a fine cube and I have many of them that I use.
I take around 5 min to solve a cube lol 🤣 budge was my main concern.
Your time does not matter
Please upload some walkthrough solves if you can. You are good at explaining.You can make 2 playlist, for fast solvers fast explanation and advanced algs, and for beginners slow explanations, That can help you attract most of the cubing community people. Because you deserve more attention than other youtubers.Thank you😃
+Sumit Mandlik I walkthrough a sub-10 solve in my video going over learning new methods at the very beginning of September. I have been avoiding walkthrough for regular 3x3 because many more advanced people like Feliks do that.
SpeedCubeReview Just because feliks does, it doesnt mean others should stop uploading. It is always good in adding values. You have ability to do that as per my point of view. Just wanted to make this point. Your decision. Thank you😃
+Sumit Mandlik :) Thank you. Possibly in the future
So which two r better long yuan or warrior or yuxin little
Everyone get Qiyi warrior w, it’s the best out of them all! The frosted surface isn’t bad at all! It’s amaaaaazing, feels expensive looks thought solid but so graceful!
I love stickerless cubes, but sometimes I really hate the shades. Like when they substitute pink for red or when they're really high in hue.
what is the best for budget cube
+Ruf Lee That is exactly what I go over in this video
Qiyi warrior w
what is going to be next comparision
Thank you for making this video SpeedCubeReview.
Should I get the yuxin magic?
Can u post a video of the budget 2x2 comparison?
+totally awesome they are all around the same price so I go through the budget ones in this video. th-cam.com/video/JG8luU6dO60/w-d-xo.html
Awesome video!!
You should make a new vid because the guanlong plus came out, and I heard it is pretty nice
+JG Cuber I already ordered it and will make a video when it comes in. The mega comparison will not be returning to the beginning of next year
Hey speed cube review I was wondering if I am thinking about making force cube with the Kung fu 3x3. What sticker size do you recommend.
+Nicholas Purple Elephant Most cubes are pretty similar. Even something like GTS, or MeiYing stickers should be good. You can always contact a shop like SCS and ask Cameron.
Thanks
i had a YJ Sulong which was good but doesn't corner cut that much. i lubed it with maru I think I out 2 drops on white side and yellow side and it was really good but still doesn's corner cut that much now it was my back backup main my main is the Gans Macaron Purple
There is some new budget brand named cubestyle!(mofang ge sub brand)
Have u heard about it ??
I found some weird 1 minute 30 seconds ad so i watched it all the way
after owning solely an aolong v2 for 2 months, I decided to buy the Kung Fu Longyoun, the Warrior W, and the MF3rs. So excited for when they get here, I was starting to get a little bored with the aolong tbh. it's a great cube but I kinda ruined it by overlubing it and whatnot
i'm a beginner which one is i need to have Cyclone Boy , KungFu or Thunderclap v1 ? which one is worth to buy ?
+Thanat Khemthong You could be a beginner or sub-10 second cuber and use either one of those and have the same times
SpeedCubeReview ok thanks
i just confused there are a lot of bands
I like to call the MF3S the Guanlong V2 and the MF3RS the Guanlong GTS.
Edit: On a side note, I wonder if MoYu would have made more sales if they called them that.
I like to call the MF3s Tony and the MF3rs Susan.
SpeedCubeReview haha lol
Hey, I just got my Gans 356s v2 in the mail. I would like to get a set of springs to change up the tensions on it and see what I like so what kind of springs should it get? When I looked up Gans springs I always see the GES Spring Set but I would like to confirm whether or not it would work for it cause I know there are some springs for certain cubes like the new Gans cubes which I think use the GES
The GES springs do not work with the air. You need this spring set (bit.ly/2jpvRcA) The numbers correspond with the 4 GES springs. I prefer tighter tensions and use the S7 springs but many people like lighter and use the S9 springs.
SpeedCubeReview Thanks
SpeedCubeReview By the way thanks so much for the recommendation to get the 356s v2 it is absolutely amazing
I still like using mine. I feel like the Air has overshadowed it but if you don't like ultra light cubes it's perfect.
SpeedCubeReview Yeah I agree the weight doesn't really make the difference for me as long as it isn't too heavy it's fine for me. I quite enjoy mine because of how smooth it is and the corner cutting is amazing, almost line to line reverse cutting
+SpeedCubeReview Just a curious question, but which of these cubes is the quietest?
+Ethan Apalis I would say warrior w with a bunch of lube
Thanks! I'll look into it. Great video :)
i feel like a point that would be valid especially on this one is modding. a big reason people get cheap 3X3 is modding, they rather pay 4 dollars for a cube they going to cut or glue stuff or mod, then a 15 dollar one. not all of this are good for modding but still, this need to be said. I understand that you're may be not the one most expert on modding, but any saying would be great (my suggestion, go for the guanlong. it has the best pieces for that). still, great video. thanks
what is the best budget stickerless without lube?
+Gijs van Haren Lube does not matter.
SpeedCubeReview THANKS :) I think I will buy the warrior w
are sticker less cubes allowed in competitions of 2017?
+skcuber 1 For awhile now they have been
SpeedCubeReview what's the rating in order out of
guaguan
meiying
and along gt?
SpeedCubeReview Hello. Which one is the best to buy YJ Yulong or QiYi Warrior W or MF3RS?
+Bharat Kumar Watch the video. I literally will be answering that question or at least give me an idea so you can make the best decision for
SpeedCubeReview I watched the video thrice, and I came to a conclusion of buying MF3RS which I guess will be better in comparison to Warrior W and YJ Yulong. Thank you!!!
+Bharat Kumar I never say it's better than the Warrior W and many people might prefer that one if they want a more stable and solid feeling cube.
SpeedCubeReview Okay... Now I am a little bit confused. Should I buy both(MF3RS and Warrior W)?
+Bharat Kumar They are very different feeling puzzles. That and the KungFu LongYaun I show are all fine and you would get similar times on each.
I got my first speed 3x3 last year. I know it is a qiyi cube but I don't know which one. I know that it is not a sail, thunderclap, or bullfight. I think it is the regular warrior but I don't know for sure. How can I find out
+D.I. Cuber Send me a photo through Facebook or the SCR website.
I don't have Facebook. How do I send you a picture through your website
+D.I. Cuber There is a thing to add file in the contact form.
I'll try
D.I. Cuber Does it have different coloured torpedo and a very dark and dull green
Isn't there a kung qinghong? or is just the longyuan better?
The LongYuan is a cheaper and much better performing puzzle.
ah alright thanks! Huge fan :p
I'm just starting into 3x3 and I used (he doesn't let me use it anymore) my brothers horrible, barely turnable, non lubed rubiks brand. Like I said I'm just getting into 3x3 and I need a good cube under 15. Any suggestions?
Any of these you can be under 10 seconds with.
SpeedCubeReview ok thanks!
Should i go for mf3rs or thunderclap or guanlong or yulong?
I'm fairly new in speed cubing so i would love to have a good speed cube
Poké Cuber oh ok thanks
Yukio Hiruma thunderclap has the best performance in all of them in my opinion because I own all the cubes you prefer but it cost $9 so it's not that much of a budget cube but it still cost low despite of it's performance.
Kaori Senpai Too bad i already recieved the mf3rs.
Yukio Hiruma It's ok mf3rs is still really good but I recommend you to try the thunderclap it's really good too.
What's the difference between mf3rs and thunderclap?
will you gonna do skewb mega comparision
+javidalikhan Thank you. I don't plan on it and went over my thoughts on skewbs during my collection video.
what is going to be next comparision
+javidalikhan There is one more. Nothing is recorded yet.
Does the kungfu longyuan has torpedoes in it ?
+gagarin cubes K Pretty much ALL 3x3s now do
what about the Yuxin Water?
+AidanStar The Warrior Cat I have a budget comparison where I talk about the fire.
what about the yuxin little magic
+minh duc This came out over half a year before that cube. I have a whole video just on the Little Magic. Check it out.
oh srry
which of these cubes can be compared to a pro speed cube?
+Miracle Magnet They are are good and can be considered "pro"
SpeedCubeReview ok
+Marielle Chan They ALL are "pro" SpeedCubes. It's all personal preference in what people like.
+Marielle Chan I can get pretty much the exact same times on every single one. At the end of the video I go over a few of the ones that stand out
+Marielle Chan I mention that at the end of this video the Warrior W doesn't feel as heap as the other budget cubes.
Any budget cubes that are great out of the box and don't need lube?
+Flyingpikachu No cube NEEDS lube. No modern one or budget one. All of them might need to be tensioned to your liking though.
SpeedCubeReview sorry I meant speed cubes that are consistently good without lube
+Flyingpikachu All of them. It depends on the feeling you like.
SpeedCubeReview ok thanks!
What about MF3S regular?
It is the exact same design as the MF3 but with some extra grooves. You can see the slight differences in my MF3 comparison video.
But it's easier to remove so you can view the inside
They are the exact same structure-wise. One is not "easier to remove" than another.
Oh.
you for got about the yulong
+Wilby S No, I talk about that when I go over the YJ GuanLong
SpeedCubeReview sry
what is a cube that never gets lockups?
+skcuber 1 No such thing. ALL cubes can lock up and it's caused by inaccurate turning by the cuber. All puzzles shown can be used for sub-10 second solvers.
SpeedCubeReview thank you
you forgot about yj yulong
I just got it around 6 dollars
SrCuber he clearly said $5
Manny VG i got it for 6$ including shipping of 1.5$
SrCuber ig have people like you and be cool
Manny VG what do u wanna say?
SrCuber he did say it in the yj section he just said the gaunlong was the main one
Is there a vid today?
+Ram Thakkar Cubingcpe You will just have to wait to find out.
SpeedCubeReview i wish there is. I want FIRST COMMENT!
So no vid today:(
+Ram Thakkar Cubingcpe You never know...
SpeedCubeReview because I'm from India
mf3rs vs thunderclap v2
newbie cuber with a olive oil lubed rubiks brand
that needs a proper speed cube and proper lube...
is mf3rs better than qiyi warrior
+ayesha mukaram I compare those two specifically at the end of this video
is the thunderclap that much better than these?
You can have the exact same times with these, Thunderclap, or even a Gan SM. It’s a lot about what feeling you prefer.
thanks dude, im just getting in to cubing and have only solved a 3x3 a few times, also I assume anything is better than the rubicks brand.
Check out this video - Rubik's Brand vs. $75 Speed Cubeth-cam.com/video/SC4HxCO3XVQ/w-d-xo.html
Mf3 is not of qiyi is of moyu
+ALEJANDRO UCEDA VILLA Yes. I said that. MoFang should not be mistaken with MoFangGe which is QiYi.
Ah ok I have understand other thing sorry and thanks for the answer
And here I am on an Aolong v2 :(
+Dhruv Chawla Two of the four fastest times on record are from an AoLong V2. It's a great cube.
SpeedCubeReview I know that, but mine corner twists a bit and ummmm, I put Vaseline in it by mistake
+Dhruv Chawla so clean it out and be a little more accurate in your turning, or at least tighten the tension a little bit.
SpeedCubeReview Yup, did that and put lube in it and tightened it.But the pieces still got sanded down so it feels weird now
SpeedCubeReview Still amazing doe
whats the best 4x4 budget?
+Cubero Anonimo there is never a "best". I go over good budget ones in my 4 x 4 mega comparison. I just beat my personal best with a mini cyclone boys FeiTeng. But that puzzle I added magnets to and the mini size might not fit everyone's preference.
SpeedCubeReview ok thanks im only browsing a budget 4x4 fast because i need one for tomorrow but thanks (sorry for my bad english)
+Cubero Anonimo I go over budget ones in my mega comparison.
SpeedCubeReview thanks
What is cuberty
😂😂cube price is 3.95$ but shipping charges is more than 10$ to my location...
Tomato Chetney same here... fucking annoying.
Buy them from China. They have free shipping. Go to eBay.
maaaan i was thinking to buy thunderclap but now with this i don't know, liked the mf3rs looks like it corner cuts better but the qiyi warrior sounds more premium.
MrLuiggethe warrior w is 10x better than any cube on this list
my guanlong can cut way over 45 almost 50 and is my backup main
Warrior w,yuxin,fangyuan or thunderclap(I'm a sub 40 solver)
Either. Your times make zero difference. What don't you like about your current cube?
Is flexing of a cube an advantage or a disadvantage!!??!
Great review though!!!
Both. It can be an advantage allowing for more movement and often cornercutting. It can be a disadvantage because it can feel uncontrollable and often cause locking more if you end up being more rough in your turning. I often like cubes to be a little less flexible because I like that stable feeling. Often it is more of a matter of preference but for those starting out a more stable cube is easier to work with.
+SpeedCubeReview Flexing is inversely proportional to stability!!
And i like stable cubes .
So kung fu or warrior w will be my choice.
Can u please tell me whch cube s logo is removable as i just learnt blind solving by ur tutorial and noah s tutorial. And i need an offical blind main!! And a budget one (bcoz i don't have that much money).
Thanks in advance!
If there is any logo that is printed on it's still fine to use for blind. The issue is having a second sticker on top of the regular sticker allowing you to feel a difference in that piece.
+SpeedCubeReview Oh then its alright!!
I actually didn't understand the purpose of logo to be removed!!
Thanks again!!
U make great reviews!!
i paid $10 dollars for a crappy one
same I wish i watched this video before my purchase
now i ordered the qiyi warrior w
And i spent 20 dollars on a rubiks brand. Yup its 20 in sweden. And it was my first cube
liked before watching
Make a 2018 version
I will after the new studio is set up
I found a kung fu in an fricking Australian Dollar Store!!! Dollar store!!!!! For 3 buckssssss!
You sound exactly like a youtuber called vernaculis.
i accidently ordered mf3s instead of mf3rs :(((((
+manwhale romeman well, you'll have a nice stable puzzle. I can still get close to the same times and often the wobbliness of the RS causes issues.
SpeedCubeReview its a good enough cube bc im a begginer my pb is 1:01
+manwhale romeman you could be over in a minute or under 10 seconds and still using this puzzle. It's a great puzzle and not anything you should be upset about
SpeedCubeReview thank you so much for encouragement i reallyblove ur vids:)
but mf3s and on all flex. Just a cheaper plastic
I used a guanlong was above 20 seconds bought a thunderclap got sub 20 instantly
SS copied QiYi?
My mzin is the Mf3rs
thunderclap or mf3rs
+rochan singh Depends if you want a more bubbly and controllable feeling or flexible and lighter.
But they say mf3rs has lock ups and thunderclap was a main for many fast cubers
+rochan singh ALL cubes lock up if you are rough or inaccurate at turning. There are fast cubers who have used Thunderclap and those who have used he MF3rs as a main. It's not a top pick for most compared to other ones out there today.
That means I should go for MF3rs then
And you said it has cheap feel to it but thunderclap doesn't right?
budget 4x4 please
+MooMan I talk about the budget ones in the 4x4 comparison.
SpeedCubeReview Which is your main?
I prefer mf3rs
I don't think you should've put lube. If someone's buying a budget cube they most likely won't buy lube
+Ivan Chan On their own they will have the same idea. They often come from he Factory with different amounts of lubrication on them already. I felt it would be unfair to just judge a cube without any adjustments at all a since the whole idea of speed cubes is that they are adjustable.
MF isn't mofang ge. It's actually mofang jiaoshi
Yes, that is what I said.
nice
Max Park now uses the MF3RS as OH main
Anyone else just trying to find a cube for modding?
ShengShou Legend is nice for shape mods
SpeedCubeReview thanks. Quick reply
The Kung Fu looks tiny .
+iTz Javvy it's the same size as all of the other ones
Hello
Heyyyyy
Hi
i m ur friend on facebook
2nd
17th
18th
hahaha
and teh cyclone boys??
They are all around $6-$10 and I talk about those during the main mega comparison that came out on the first of this year.
first
But YJ Guanlong is the best budget 3x3, like if you agree
Half A Cubie No.
Solveeverything! No..I hate.mine now.
No not really, the mf3rs is the real deal.