Sea Doo Ergolock Knee Pad Installation on 2021 Fish Pro

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ก.พ. 2025

ความคิดเห็น • 10

  • @mustangcarwash515
    @mustangcarwash515 7 หลายเดือนก่อน

    Very nice thank you very much

  • @billjenkins1535
    @billjenkins1535 3 ปีที่แล้ว

    Thanks for posting this up. That is a nice addition to the FP body. Glad that there are so many aftermarket people making things we can add.

  • @paulfletcher3523
    @paulfletcher3523 ปีที่แล้ว

    Nice job! Thanks for a great explanation. Do you think this could be attached without drilling any holes? Adhesive only? Your thoughts? Thanks!

  • @danieljacobs9105
    @danieljacobs9105 10 หลายเดือนก่อน

    ….grabbed a pair of pads for a 23’ FishPro
    Same situation, in fact 95% of double sided adhesive came right off with the protective sheet!!
    Attempting to save the day with Marine JBWeld??
    We’ll see

  • @badkarma2202
    @badkarma2202 11 หลายเดือนก่อน

    Did my Seadoo and found adhesion promoter makes it stick much better and it’s not going to come off.

  • @duyenxin320
    @duyenxin320 ปีที่แล้ว

    What the part # on the pad.?

  • @BoatLifeNation
    @BoatLifeNation 3 ปีที่แล้ว +1

    Was it cheaper to buy these aftermarket? I’ve been wondering if it’s worth buying it fully loaded or adding my own things after, like gps, speakers, and knee pads

    • @doingshtonmaltman6225
      @doingshtonmaltman6225  3 ปีที่แล้ว +3

      Carson. I know the Limited model comes with the knee pads as factory stock and likely a few others. There was not much difference between having the speakers come from the factor vs buying and installing separately from a cost point of view but it is most certainly cheaper to install parts such as these yourself if they don’t come from the factory with them. Drive your ski for a season and then decide what you think you might want to add. You can order them and install them in the off season by yourself.

  • @wildhorse1966
    @wildhorse1966 3 ปีที่แล้ว

    the 3M 77 spray adhesive is the wrong product for this application but i would recommend using the 3M adhesion promoter wipes to clean the area where the double sided tape will apply to as it makes it stick so much better .. we use this in the bodyshop environment for anything we use double sided tape on and have seen it work much better then when we used to not use it and the tape would fail

  • @Sisu2280
    @Sisu2280 3 ปีที่แล้ว +1

    How do you get your ski on the stand like that?