Thank you from Finland (town of Joensuu), Now I have left hand Cup (read beer) holder for my Fish Pro That Seadoo template really is not very precise to be honest, sorry BRP We used to do Nokia celly's plastic parts here in foregone days and I am sorry to say that those very much more accurate than that template. Well, those workers are doing insulin dispensers nowadays so were are used to quite a lot of more high standards of quality than our Canadian friends, :-) . Although I have to admit that I do not want any other PWC than BRP. Closed loop circuit cooling is the best. And when Mr T is In Fl I might visit US of A again. My daughter still remembers when she had the possibility to ride PWC around the Key West 2009 (she was sweet 16 and I had to be backseated for 4 hrs) Cheers and love from EU
so do you think the port side one will interfere with the controls? i wanted one on the left side as well for a cup holder on both sides. no rod holder needed
Thanks for the video. You answered a couple of my questions I had on this rod/cup holder. Did you have to remove your glove box lid and the part below it in order to wrap it? The CF wrap looks good and I was thinking about doing the same thing.
Thanks for the very helpful video. I don't see any washers or other support to secure the bolts through. Any issue with these bolts pulling out due to stress from trolling rods? Do you see any problem with adding fender style washers to the install?
If you have a newer ski it will already have the holes marked on the back of the panel. No need for a template. If you need the template it is at the very bottom of the instructions that I link in the description. There will be a download link at the end of the instructions.
@@bwon4440 the template is not great. The holes when I got through were not perfect center but still worked fine. I went by the template exactly. Just take your time and it will look factory when you are finished. I plan to do 2 more small modifications, dock bumpers & ergo lock pads. Then one big modification, riva waterbox and trough hull exhaust. Just waiting on parts to arrive.
This video was so helpful. My equipment arrived with no instructions but more importantly the templates. Thanks so much.
Great video!! Installed them on my Fish Pro. Now I’m sure the wife will want them on the GTX!!
exactly what i was looking for thank you! now a video for the ladder ?
Installed mine today, thanks buddy!!! I took my like 30 minutes everything, just may sure to place the templates where they should go.
Thank you from Finland (town of Joensuu),
Now I have left hand Cup (read beer) holder for my Fish Pro
That Seadoo template really is not very precise to be honest, sorry BRP
We used to do Nokia celly's plastic parts here in foregone days and I am sorry to say that those very much more accurate than that template.
Well, those workers are doing insulin dispensers nowadays so were are used to quite a lot of more high standards of quality than our Canadian friends, :-) . Although I have to admit that I do not want any other PWC than BRP. Closed loop circuit cooling is the best.
And when Mr T is In Fl I might visit US of A again. My daughter still remembers when she had the possibility to ride PWC around the Key West 2009 (she was sweet 16 and I had to be backseated for 4 hrs)
Cheers and love from EU
Thanks brother for the support!
Thank you for the the step by step video/ Very helpfull.
No problem, thanks for watching!
Thanks for posting this. Good info and well done.
No problem, hope to make more videos soon!
Will the rod holder swivel left and right and will it accommodate an umbrella?
Thank you for a very helpful video
Great video, thanks. Really useful.
Yo this Jason nice video man
@@rjcfilms6186 hell yeah you still got the same number right sent you a couple of messages pat couple of months
Thanks!
where is the link below for the templetes?
Good video! 👏👏👏
so do you think the port side one will interfere with the controls? i wanted one on the left side as well for a cup holder on both sides. no rod holder needed
Where can I buy the parts ??
Thanks for the video. You answered a couple of my questions I had on this rod/cup holder. Did you have to remove your glove box lid and the part below it in order to wrap it? The CF wrap looks good and I was thinking about doing the same thing.
Good to know. What part of Alabama are you in and where do you ride?
@@drcarslife8753 I ride at lake Eufaula on the AL GA border Chattahoochee river
Thanks for the very helpful video. I don't see any washers or other support to secure the bolts through. Any issue with these bolts pulling out due to stress from trolling rods? Do you see any problem with adding fender style washers to the install?
My kit came with washers. Definitely use them.
Where do you get template
The link in
Instruction.brp
Look for cup and rod holder.
Please use chome browser to open the template
Do you have a template for the carbon fiber on the the storage compartment? Thanks!
I plan to make a video soon, be sure to sub to the channel. I use knifeless tape by 3m
@@rjcfilms6186 please update me when you do
I could not find a template B from that brp instuction
If you have a newer ski it will already have the holes marked on the back of the panel. No need for a template. If you need the template it is at the very bottom of the instructions that I link in the description. There will be a download link at the end of the instructions.
@@rjcfilms6186 thanks for a good hint. I start my project tomorrow...hope it going smooth
@@bwon4440 the template is not great. The holes when I got through were not perfect center but still worked fine. I went by the template exactly. Just take your time and it will look factory when you are finished. I plan to do 2 more small modifications, dock bumpers & ergo lock pads. Then one big modification, riva waterbox and trough hull exhaust. Just waiting on parts to arrive.
@@rjcfilms6186 on my 2021 does not have a molded mark.
Doesn't work for a 2024 GTR-X 300