AWESOME , Can you please share the change in code to run all the 8 effects one by one in addition to single selected effect. Awaiting your earliest response.
Hello. How can I make this program turn on all the LEDs after finishing the effect and not loop? Please let me know because I want to use it for the opening of the car. Thank you.
@@TAMPAL_BOR10 Hello. Thanks for the reply I would like to change the Audi style opening motion to a program where all LEDs are always on after one process, but I want a program. I am making my own tail lamp and want to use it.
thank you for your reply. Program is a beginner and I do not understand well. I am Japanese, so if you don't mind, please tell me how to change the program. Is it a loop function? I'm thinking about it, but I'm not confident. Right now, I'm making a tail lamp from scratch. I would like to use it for this. Thank you.
Thanks for this wonderful work, mine programed well but it is not saving the last sequence again, whenever i restart it, it resets to first sequence and speed
@@tanishqmourya564 Dear: I want to get rid of this irritating switching. I don't want to use a single switch. The Circuit must be switched its Effect [mode] without pressing any Switch. Means, all effects must be played [operated] automatically [one after another] without any switch.
Great channnel ...Quick question...with this set up you did can it be split into two as in the case of a left and right set up..much like tail lights for a car🤔🤔🤔
it is better to use independent resistor for each led because leds are not be turned on at the same time so current is different every time and voltage is too light will not be constant or leds can be burned if low value resistor is used
Hi really love some of the video's, Please can you help us ? My son & I would love to build a few of your designs but please can you help How do we put the code in for the running lights etc ??
Well done for your very informative channel and videos. Recently I discovered the arduino world, so I would like to know how to modify the code in order to have, in addition to the eight effects by the push button, another sequences with these eight effects automatically. I plan to make a small structure in leds but I do not yet master writing codes. Besides, thank you for having already shared with us the initial code. Hoping for an answer, cordially, Eric from France.👍👍🤩
Hello. I really liked your idea. You can add a few more animations, for example, like a full line sroboscope. stroboscopic division into two stripes. movement to the left then to the right and right continuation of the light bulb in the same way and 3 is possible. and alternately turning on and off the light bulb turned on. and add an automatic function but also have a manual setting. Can these changes be added to the firmware? привет . очень понравилась ваша идея . можно ли добавить еще несколько анимаций к примеру как сробоскоп полная линия . стробоскоп деление на две полосы . движение влево потом в право пра последоватленьях лампочки так же и 3 можно . и по очередно включение выключени соседних лампоччек . и добавит ь функцию автомат но и что бы было и ручная настройка. сможете добавть в прошивки эти изменения? лайк подписка
@@KiyanisLab oh my friend, I will be glad to repeat after you. I'm really looking forward to it.ох ты друг, и буду рад, что повторяешь за ней. я действительно с нетерпением жду этого.
@@KiyanisLab важно . сделать на кнопках переключение режимов и автомат чтобы сами эфекты преключались с натройкой скорости переключения и добавить эффекты
![Arduino Project #12 | 3 Pins, 32 LEDs, 4 Shift Registers [74HC595]](/img/n.gif)
Very informative 💯😮.. V.Gud and helpful video sir..
Ahmed Raza ❤
AWESOME , Can you please share the change in code to run all the 8 effects one by one in addition to single selected effect. Awaiting your earliest response.
Hello.
How can I make this program turn on all the LEDs after finishing the effect and not loop?
Please let me know because I want to use it for the opening of the car.
Thank you.
code need to be modified a little for that
@@KiyanisLab .Through which file do you program.? What are examples files??
@@KiyanisLab .The way to enter the code in the description link is how I have downloaded it
@@TAMPAL_BOR10 Hello. Thanks for the reply I would like to change the Audi style opening motion to a program where all LEDs are always on after one process, but I want a program. I am making my own tail lamp and want to use it.
@@Kai-dg4go .many are still confused about how to program it. And do all the links in the description have to be used or only one...?
Amazing project😍
Ahmed Raza Electrical
Very nice product❤❤
❤❤❤❤❤❤❤❤❤
Very nice voice 😍😍😍
I have found, what I was looking for. Thanks and greetings from Czechia 🇨🇿👍
thank you for your reply.
Program is a beginner and I do not understand well.
I am Japanese, so if you don't mind, please tell me how to change the program.
Is it a loop function? I'm thinking about it, but I'm not confident.
Right now, I'm making a tail lamp from scratch.
I would like to use it for this.
Thank you.
Nice job!! Did your board use atmega328 or atmega168?
Thank for the answer
Thanks for this wonderful work, mine programed well but it is not saving the last sequence again, whenever i restart it, it resets to first sequence and speed
I have tried this, but why does the output to the LED change to negative
Sir.if I want to use ws2812 strips in that series than what is setting required..I mn I use evry pannel in 10 light with this effect..
How we can make it automatic working without pre-set buttons?
You can use a switching circuit 4 channel
@@tanishqmourya564
Dear: I want to get rid of this irritating switching. I don't want to use a single switch. The Circuit must be switched its Effect [mode] without pressing any Switch. Means, all effects must be played [operated] automatically [one after another] without any switch.
If you know coding you can change the Arduino program and attach the effects in void loop it very easy to program
@@tanishqmourya564
How can I get its circuit diagram with coding (source file)? Please advise and provide the link if possible. Thanks and Regards.
@@iq2823 there is no such source file available yet but I will try to make one ang give you
Sir ye 220 volt se kaise chala sakte hai?
Muje 220v light strip lagani hai uspe.
Great channnel ...Quick question...with this set up you did can it be split into two as in the case of a left and right set up..much like tail lights for a car🤔🤔🤔
Yes, absolutely
Cool video. I was going to ask for a link to the code but you already provided it. Super awesome! Thank you!
What's the difference between Chaser led and running led circuits ?
there is no difference
Is it 12v supply
Can we use 1w each led
Bro u can use 1 resistor in the GND and be done with it... no need for so many resistors
it is better to use independent resistor for each led because leds are not be turned on at the same time so current is different every time and voltage is too light will not be constant or leds can be burned if low value resistor is used
@@KiyanisLab seems like a good argument... thanks
Can I add more LEDs in this diagram
Can we add relays instead of leda to control Diwali lights?
Hi really love some of the video's,
Please can you help us ? My son & I would love to build a few of your designs but please can you help
How do we put the code in for the running lights etc ??
th-cam.com/video/tK9krFxTgCc/w-d-xo.html
which Software r u using for making schematic diagrams?
I have tried this on arduino nano, it doesnt save & remember the last sequence again. I programmed using Arduino IDE 2.x
Bro how i connect the 230v led series to it instead of leds
Well done for your very informative channel and videos. Recently I discovered the arduino world, so I would like to know how to modify the code in order to have, in addition to the eight effects by the push button, another sequences with these eight effects automatically. I plan to make a small structure in leds but I do not yet master writing codes. Besides, thank you for having already shared with us the initial code. Hoping for an answer, cordially, Eric from France.👍👍🤩
How to change codes to led strip sir?
ill make it soon bro
Awesome
Sir u make this automatic changing effect..
wow this is awesome
Very useful 👍👍👍👍👍
Super 🙏🙏🙏🙏🙏🙏🙏
IT's useful, too. th-cam.com/video/E3wGyZyk_2g/w-d-xo.html
Hi,
Sir ye mobile se work karega kya?
hello.. code cannot be uploaded to arduino nano. Its an error.. please help.
Same problem facing com port error
@@pareshpanchal52 still not working?.
How many led bulb connection single line
Sir kya ham isme ke channel ghata sakte hai
yes
Bro can we use variable resistor instead of push button for speed
make a chaser relay from ESP 01 and IC WS2811.
I want without button and auto chaser😢
Sir please ak vedio banna ka do na , khaya sa program kiya please please 🙏🙏🙏🙏
Can you make 32 channel led chaser?
yes i can bro
Thank you sir.......❤
Beautiful project and beautiful viceo, you could have the code even if you need to pay for it, thanks
dear this coding is not working having some error
Sir program nahi ho raha ha
Thank you!
Sir code upload kaise kare
Hello. I really liked your idea. You can add a few more animations, for example, like a full line sroboscope. stroboscopic division into two stripes. movement to the left then to the right and right continuation of the light bulb in the same way and 3 is possible. and alternately turning on and off the light bulb turned on. and add an automatic function but also have a manual setting. Can these changes be added to the firmware?
привет . очень понравилась ваша идея . можно ли добавить еще несколько анимаций к примеру как сробоскоп полная линия . стробоскоп деление на две полосы . движение влево потом в право пра последоватленьях лампочки так же и 3 можно . и по очередно включение выключени соседних лампоччек . и добавит ь функцию автомат но и что бы было и ручная настройка. сможете добавть в прошивки эти изменения? лайк подписка
yes i will make it soon
@@KiyanisLab oh my friend, I will be glad to repeat after you. I'm really looking forward to it.ох ты друг, и буду рад, что повторяешь за ней. я действительно с нетерпением жду этого.
@@KiyanisLab важно . сделать на кнопках переключение режимов и автомат чтобы сами эфекты преключались с натройкой скорости переключения и добавить эффекты
Nice , thanks alot
5 chases Circuit bro
Input voltage
6 to 12v
Please make without microcontroller
ok bro i will
👍👍👍like
please remove effect changing switch and male it automatic using delay and give me code
Bikinin yg pake sensor
We want the coding
Make it heart shape disign man. No use of line shape. Try some new ideas
th-cam.com/video/E3wGyZyk_2g/w-d-xo.html
@@NanoCreator 😂🤣
Hi
42 led plz
Sir how set automatically changing design to this circute
Great work Sir
Nice video 👍
#AscendingSteps
5 led chease effect
hello
Mantap....
Sede tha coad
Sar wattsapp number sand karna ji
Thank you!