I like watching how to make rigs I have just started up fishing I have tryed to get trident tackle termalinks I have even called trident and the answer I got was there is no demand for it just yet l have tryed loads of different places and on line and there is nothing so I can't understand why there is no demand. Can you please help me out and advise me where I can get them
Have used sinilar myself a few times, but made with 80lb mono rather than the rod, and the hooklength swivel and srt spring both locked in place with powergum stopknots. Works for me👍
at a push bike wheel, spokes are good on big tides used in Dover on admiralty pier narrowest part of Chanel a mile out to sea they will hold any tide 8 oz long wire 18 lb line
Pete Watson. Ive just packaged up your Bait Loaders mate and a couple of Tackle Time tackle box decals. They will be sent first class post tomorrow....Tight lines mate
Yes mate its simply held in place by how tight it sits on the 1.6mm S/S..However, if you ever find that a bead is a little slack you could always place a tiny drop of super glue to keep it in place....Tight Lines mate
Hello my friend. I have an issue with the reel seat on my agility 2 multiplier surf rod from Shakespeare. For some reason I can't get the reel seat to grip onto the rod. When I place my reel on the rod, the reel and reel seat spins around the blank. Can you give me advice on what to do or recommend reel seats to purchase?
Great video again fella, only came across your site a few weeks back and have just finished making a few rotten bottom rigs. Can I ask, do you use 2.4 mm S/S for the longer bait holders or 3 mm?
Thanks for watching Peter im glad the videos help...I only use 2.4mm for the bait loaders I have got some 3mm but for me and even using it for a Bait Loader it's just too thick and heavy for me mate. The 2.4 will do the job no problem at all...
Appreciate the reply mate. I picked up a packet of barbecue skewers after watching one of your videos, fantastic idea and makes life much easier, but I found the skewers a little short using a Pennel Rig...Regarding your comments on some 316 S/S rods being soft, I bought a pack of 50 on Amazon for £8.50 including delivery, I hadn't given their softness any thought until I came to cut some 16 gauge, when I cut that, one piece always shoots across the room like a missile!
hahahaahah nor mate..Unfortunately, I've ended up with this strange disease in both of my legs. I say no to them all the time but they keep taking me into bloody kebab shops and fish & chip shops n that lololol....Yes mate I think I need to loose a stone or 2 hahah...
Some (constructive) comments. Whoever is filming needs to pop the camera on a tripod, it's moving too much and is distracting. Clearly a different camera is being used as well because the image quality has deteriorated in comparison to your videos before Christmas; can you do anything about that? Finally, I'd recommend a shotgun mic to improve the audio quality as well. Good luck with it all :)
OK, has the lighting changed at all? Regardless, it's just fine tuning, the content is great. Another thought I had was that rather than having the camera move or zoom forward when showing the detail of the rig building, you could say something like "Let's have a closer look at how we put this rig together" and then cut from wide to close shots with no zoom in between if that makes sense? Regardless, I am a huge fan of you and your videos and am super grateful that you're back!
I'm very grateful for your comments John as I'm a true believer that constructive criticism if you like can always bring out the best in things so thanks once again. Hitting onto the close-ups you talk about, I've been thinking of using my gopro hero 5 and either placing it on my head or on a small tripod giving you lads a birds eye view of whatever im on with...Watch this space mate ill give it a go, always keen on trying new ideas
I don't even go sea fishing, love watching this guys, tackle building vids.
I like watching how to make rigs I have just started up fishing I have tryed to get trident tackle termalinks I have even called trident and the answer I got was there is no demand for it just yet l have tryed loads of different places and on line and there is nothing so I can't understand why there is no demand.
Can you please help me out and advise me where I can get them
wish this guy would upload more rig videos. He was superb at it!
Have used sinilar myself a few times, but made with 80lb mono rather than the rod, and the hooklength swivel and srt spring both locked in place with powergum stopknots. Works for me👍
Another great and informative video Paul! Keep them coming need all the help I can get ! Thanks
Very informative, and helpful,keep up the good work,looking forward to the next one,tight line's marra👍🤓
Nice to c u back m8; keep the vids going, just started fishing again after 30years off but learning a lot from your tips and vids
Welcome back paulie loved your videos always a great watch pal keep on going mate
Great to have You back, great informative video as always.
Great to see you back mate. Excellent videos as always hope all well with you. Learnt a lot from your vids all the best from the highlands.
glad to see you back sandman. keep em coming...
at a push bike wheel, spokes are good on big tides used in Dover on admiralty pier narrowest part of Chanel a mile out to sea they will hold any tide 8 oz long wire 18 lb line
Great presentation, 👍
Nice to see you back, keep up the videos
Great m8 definitely I will try it next trip to Bristol Channel love the rig and the video many thankx for the tutorial
Good to see you back bro.......-(All the way from Singapore)
All the way from Singapore....Awesome. Thanks for watching
the man the myth the legend
hooray a video at last, waited ages for this Mr Sandman keep em coming
Good to see you back and hope to see more great videos
Great to see you back, keep up the good work fella
Hurrah! I am *so* pleased to see another upload :)
Wheyhey! Back again. Good to see. Please don't make us wait so long next time. Got withdrawl systems. :-)
Wot s great video mate really in joyed it
Nice one, good to see you back fella 👍
Brilliant, glad you're back mate
PS absolutey love the vids.
Great video as usual Paul! Welcome back 👍
Good to see you back Paul, it has been too long since the last one.
Good to have you back don’t disappear for so long
Many thanks for the support Andy.......
love your tips bruv
good to see you back keep up the good work
Welcome back Paul.
Nice to see you back mate
Glad to see u back m8 😉 great vid 😃
An excellent video Paul, very clearly demo'ed...
Great video marra! 👍👍
Another cracking vid mate, i like that rig and will be giving it a go
Pete Watson. Ive just packaged up your Bait Loaders mate and a couple of Tackle Time tackle box decals. They will be sent first class post tomorrow....Tight lines mate
Sandmans Tackle Time brilliant thanks Paul, look forward to using them and the decals will be on the old box, tight lines mate
Loving the videos👌
Grate fishing tips
Paul how do you stop the beads and swivels moving along the bar
Nice too see you back
Welcome back.
Great stuff Paul, dont leave it so long before your next vid.
What is the reel to your right?, great site this answers for everything.
Good to see you back, Paul.....been too long
Thanks, Martin...Glad to be back
Welcome back mate.
Hi paul can you put pic up of ur rig making or the way you put it together as i am after one myself cheers
What wire would you use to make French Booms?
Hi bud, y'know the clip you make and use instead of the imp. Do you sell them?
how does the bead not slide back down under tension? is it because of how tight it is on the rod? glad to see you back learnt loads of your vids
Yes mate its simply held in place by how tight it sits on the 1.6mm S/S..However, if you ever find that a bead is a little slack you could always place a tiny drop of super glue to keep it in place....Tight Lines mate
Hello my friend. I have an issue with the reel seat on my agility 2 multiplier surf rod from Shakespeare. For some reason I can't get the reel seat to grip onto the rod. When I place my reel on the rod, the reel and reel seat spins around the blank. Can you give me advice on what to do or recommend reel seats to purchase?
Your otg casting is looking good. soon be nesa season ;)
I wish I could Pendulum as good as I cast off the ground lolol.. I work at it. Try and get on a field with Mr Blakeman lolol..
Great video again fella, only came across your site a few weeks back and have just finished making a few rotten bottom rigs. Can I ask, do you use 2.4 mm S/S for the longer bait holders or 3 mm?
Thanks for watching Peter im glad the videos help...I only use 2.4mm for the bait loaders I have got some 3mm but for me and even using it for a Bait Loader it's just too thick and heavy for me mate. The 2.4 will do the job no problem at all...
Appreciate the reply mate. I picked up a packet of barbecue skewers after watching one of your videos, fantastic idea and makes life much easier, but I found the skewers a little short using a Pennel Rig...Regarding your comments on some 316 S/S rods being soft, I bought a pack of 50 on Amazon for £8.50 including delivery, I hadn't given their softness any thought until I came to cut some 16 gauge, when I cut that, one piece always shoots across the room like a missile!
Awesome video... Love it always. What's the diameter of the 316 stainless steel rod u using?
It's 1.6 👍🏼
1.6mm for the majority of the stuff i make. 2.4mm for the bait loaders and 16 gauge for light work
Thank you so much. Appreciate it
Please what gauge is the 316 rod
Looks like you put on some weight? Have you been in the nick
hahahaahah nor mate..Unfortunately, I've ended up with this strange disease in both of my legs. I say no to them all the time but they keep taking me into bloody kebab shops and fish & chip shops n that lololol....Yes mate I think I need to loose a stone or 2 hahah...
Do you sell your stuff that you make if you don't mind me asking
Certain bits n bobs mate. Its just a case of finding the time lolol. What are you after?
Some (constructive) comments. Whoever is filming needs to pop the camera on a tripod, it's moving too much and is distracting. Clearly a different camera is being used as well because the image quality has deteriorated in comparison to your videos before Christmas; can you do anything about that? Finally, I'd recommend a shotgun mic to improve the audio quality as well. Good luck with it all :)
Some good interesting points in your comment mate, Ill certainly take them onboard and see what I can do...Same camera by the way
OK, has the lighting changed at all? Regardless, it's just fine tuning, the content is great. Another thought I had was that rather than having the camera move or zoom forward when showing the detail of the rig building, you could say something like "Let's have a closer look at how we put this rig together" and then cut from wide to close shots with no zoom in between if that makes sense?
Regardless, I am a huge fan of you and your videos and am super grateful that you're back!
I'm very grateful for your comments John as I'm a true believer that constructive criticism if you like can always bring out the best in things so thanks once again. Hitting onto the close-ups you talk about, I've been thinking of using my gopro hero 5 and either placing it on my head or on a small tripod giving you lads a birds eye view of whatever im on with...Watch this space mate ill give it a go, always keen on trying new ideas
Excellent! That's a really good idea :)