Printable RC motorglider - Eclipson Model V2 Build guide.
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2023
- Updated build guide of our fantastic motorglider Eclipson model V2 (files has not been updated, just a new build video)
Read more: www.eclipson-airplanes.com/mo... - วิทยาศาสตร์และเทคโนโลยี
I've built this plane and flied amazing!
Much Better Hinging Method !! 👍
Is the motoglider a good beginner plane?
Yes, it is a good option if printed with LW-PLA
which plane would you recommend for beginners and for it to be printer with PLA + and tpu ?
Beginners and PLA is not a good combination. LW-PLA is more adequate. Model S, model B or the free Wolf are good options to learn.
Why didn't you use a screw in order to keep the canopy in place? An M2 heat insert plus screw doesn't add much weight.
It is another alternative, anyway in modern design we are using another method based on a rubber band.
Hello, I printed many of your models with lw pla and produced them using the same electronic parts. I balanced the planes, but none of them flew. what am i doing wrong
Do you have any video? try to upload it to our Fb group to see what was wrong. facebook.com/groups/146642260886244/
@@eclipsonairplanes Unfortunately I don't have a video at the moment because I'm going alone to fly planes. I've never taken a video because it would be difficult to fly and shoot video at the same time alone.
Nota 10
Hi, I love the design of this plane, but have a problem printing both Wing2L and Wing2R. The hole for the aileron seem to be generated in thin air and there is no top. If I add 2 top layers, it also creates this for the main profile and have to cut out those layers again. Any recommandations on how to print those 2 parts? (cfr 1:20 in the video)
Can you contact us trought our page with some pictures ? We will try to help you
👍 Promo-SM