14 bolt swap and disc brake conversion

I found a 14 bolt to swap into the squarebody. I get this rear axle cleaned up and swapped into my 85 Chevy k20. Then we installed a disc brake conversion kit on it. It turned out awesome and works even better.
Check out my main channel ‪@ballisticallychallenged‬

[@arizonarider6998]

Man Im addicted to Off Road Design !!! I started with the heavy shackles on my k20 and next thing you know I was getting everything I could from them .

[@BCBackstage]

I get it man....I want everything from them

[@victoroneill7924]

I had to use a big slide hammer to remove the seals! None of the tools that you're supposed to use worked.

[@BCBackstage]

Yea 😂 get them out any way you can

[@dennisstack5652]

I used a pickle fork to pry mine out

[@ahbeebnuttz]

Where did you get the brake conversion kit from?

[@BCBackstage]

The brackets lines and lug studs were from off-road design, the rotors, pads and calipers I got locally 👍

[@ahbeebnuttz]

Thanks!
What year of truck did you use to look up and source the pads, rotors, and calipers from the local parts shop?

[@BCBackstage]

Front rotors, pads and calipers will work off any 80's k20... I went with the Cadillac eldorado rear calipers that have a parking brake,

[@codyrobertson7606]

Any reason you used a spacer the kit I got didn’t have spacers

[@markcarlile7380]

What year eldorado with parking brake works

[@victoroneill7924]

You have the wrong calipers!

[@BCBackstage]

Why do you say that?