Occasionally a new handle will hang up on the metal guard where it goes into the head. Sometimes you can use your mallet and an old screwdriver to get the catching part to clear. Or it may require the use of a file or sander to taper the leading edge of the guard. You can easily see the spot that needs attention. It may take multiple tries to get this done. It sucks, but it does happen. Just be patient and do the work. If uncertain you can call the store for guidance. 402-502-4852
I have hung handles in axes where the grain was not perfectly aligned with the handle. I am more worried whether the handle fits the eye properly. I watch my grandfather hang a new handle on an axe head with his pocket knife and used a fence staple for a wedge, because that is what he had.
I bought one of these mauls 2 1/2 years ago. Used it 3-4 times just to split small amounts for campfires. It hasn’t been abused and it’s been kept in my garage that’s pretty consistent temp year round and not overly humid. Just noticed my head and metal sleeve are now loose on the handle.. is my only option to buy a new handle and re do it completely? Seems like it should have lasted longer than this.
Wood srinks as it dries and swells when moisture is absorbed. If a wood hafted tool is used or stored in a damp environment the fibers swell but the metal confines the wood and the air spaces in the wood get compressed. After the wood fibers shrink the part of the haft in the head is smaller and fits loosely. It can be temporarily made tighter by introducing moisture into the wood by soaking for a short time; not a good idea for a long time fix. More metal wedges can Be used to expand the eye for a better hold. Best is remove the wedge and replace it with a new one. A little epoxy between the haft and the metal guard will keep it in place.
Disagree regarding sharpening a splitting axe to a razor edge. A sharp axe is more likely to cross grain and get jammed. I’ve been splitting for 20 years and tried it all, splitting axes definitely shouldn’t be razor
Occasionally a new handle will hang up on the metal guard where it goes into the head. Sometimes you can use your mallet and an old screwdriver to get the catching part to clear. Or it may require the use of a file or sander to taper the leading edge of the guard. You can easily see the spot that needs attention. It may take multiple tries to get this done. It sucks, but it does happen. Just be patient and do the work. If uncertain you can call the store for guidance. 402-502-4852
Love the Gränsfors Bruk videos keep them coming!
Glad you are enjoying them, there are more to come!
Damn, you panned to that retail wall and my inner lumberjack experienced climax
LOL! Stop on in! It is even better in person!!
Thanks for watching!
Sorry to read about your loss Jennifer...RIP Curtis
I put TiteBond exterior adhesive on the wedge before I drive it in. That way it won’t loosen over time.
Sweet handle removing rack!!
I have hung handles in axes where the grain was not perfectly aligned with the handle. I am more worried whether the handle fits the eye properly. I watch my grandfather hang a new handle on an axe head with his pocket knife and used a fence staple for a wedge, because that is what he had.
Great vid !!! Thank you!!
Glad you liked it!
Thanks for watching!
I need a new handle for the gransfor splitting axe with metal collar. Can you help me out? I live in Pittsburgh pa
Does the overstrike metal guard goes inside the head? How much in it goes if it does at all? Thank you.
I bought one of these mauls 2 1/2 years ago. Used it 3-4 times just to split small amounts for campfires. It hasn’t been abused and it’s been kept in my garage that’s pretty consistent temp year round and not overly humid. Just noticed my head and metal sleeve are now loose on the handle.. is my only option to buy a new handle and re do it completely? Seems like it should have lasted longer than this.
Wood srinks as it dries and swells when moisture is absorbed. If a wood hafted tool is used or stored in a damp environment the fibers swell but the metal confines the wood and the air spaces in the wood get compressed. After the wood fibers shrink the part of the haft in the head is smaller and fits loosely. It can be temporarily made tighter by introducing moisture into the wood by soaking for a short time; not a good idea for a long time fix. More metal wedges can Be used to expand the eye for a better hold. Best is remove the wedge and replace it with a new one. A little epoxy between the haft and the metal guard will keep it in place.
How much $ dollers is it to buy that maul size with handle?
WHEN IS YOUR NEXT GBA SHIPMENT COMING IN
Thanks god bless
Nice job god bless
Honestly, if i don't intend on saving the handle i'll just drill out as much wood as possible to make the handle come out easier.
Yeah allergies are a pain this year. Everyone looks at you like you have corona.
Hi Brian, Thanks for watching! Stupid Rona, she needs to go away!
🤝🤝🤝
No 441 replacement handles
Way too much talking.
Disagree regarding sharpening a splitting axe to a razor edge. A sharp axe is more likely to cross grain and get jammed. I’ve been splitting for 20 years and tried it all, splitting axes definitely shouldn’t be razor