Anycubic Photon M3 - Resin 3D Printer - Unbox & Setup
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Amazon Links
Buy it here: geni.us/ypWC7wA
Recommended: geni.us/JustVlads
ANYCUBIC Photon M3 Resin 3D Printer, 7.6'' LCD SLA UV 3D Resin Printer with 4K+ Monochrome Screen, Protective Film, Fast Printing, Max Printing Size 7.08" × 6.45" × 4.03"
7.6" Screen & Large Print Volume: The ANYCUBIC Photon M3 resin printer features 7.6" screen and can print up to max volume of 7.08" x 6.45" x 4.03", giving you more possibilities for your creations.
Adds a replaceable anti-scratch film (an extra protective film is included for replacement) to effectively prevent liquids from leaking to the LCD screen.
4K+ High Resolution & High Precision: Photon M3 4K+ monochrome resin printer help print clearer, finer surface textures.
With a 400:1 screen contrast ratio, the fast printer perfectly prints models with sharp corners and delicate edges, and also greatly reduces residue in the resin tank.
Ultra-fast Printing: Photon M3 resin printer fastest printing speed can reach 50mm/h, and the single-layer exposure curing time is as low as 1.5s.
It only takes 2.5 hours to print a 12cm model, which is 2.5 times faster than other 2k resin printers, help get models faster.
Power UV Light: Using the latest ANYCUBIBC Light Turbo light source system, the LED lamp beads arranged in a matrix provide a powerful ultraviolet light source.
The new build plate has a texturized checkerboard pattern that dramatically improves adhesion and print success rate.
Adjustable UV Power: Compared with other LCD 3D printers, the ANYCUBIC Photon M3 printer can achieve 30%-100% power adjustment, not only supports ordinary 405nm UV resin, but also supports special resin, compatible with more materials, UV power can be adjust according to resin needs.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....
New Channel: www.youtube.com/@Just_Print
Photon M3: geni.us/aqqX
Recommended: geni.us/JustVlads
Where you paid or get any benefit from this review?
I'd also like to know what the guy above me asked.
For an unknown reason the test went perfectly but when I try other files the resin stick to the tube/vat????? I changed my bottom exposure to 60sec. for the 1rst 6 layers and still not good... Help
Just ordered this printer off Amazon today, just starting into this hobby, mostly for D&D minis but also some DC comic & R&M busts/models. I’m super excited after watching this video!
you will love it - creating supports takes heaps of time when you begin, then its very easy :) - enjoy!
Hi,how is the machine?Do yoı advice buying it?
I'm interested in getting this printer to finally enter the world of 3D resin printing. Sadly, your review seems to be the only one here on TH-cam. There are tons of reviews for the Photon M3 Plus and Max, but only one for the regular M3. Thats why your review is even more appreciated.
Edit: Got this printer on a great discount and I'm loving it.
Where do you get files? Do you just use the same ones from thingiverse as with pla printers?
@@dnafpv Files? What do you mean? You mean files to print? If so, Im sculpting my own figures and stuff with Zbrush and then print it.
Ok so you’re saying there isn’t a thingverse for resin printing got it. Guess I won’t buy one then oh well
@@dnafpv I didnt say that. All Im saying is Im not using any files but my own for printing. Of course there is stuff for resin printers on thingyverse. It doesnt make a difference which printer you use. The files are all STL files, so you can open them in ur slicer software and export them to ur printers file format and print them.
Dude! That’s so awesome thank you so much man
Recently purchased this printer about a week ago. So far it's been great.
They should just put an .mp4 of this video in that thumb drive they sent. Very useful video for someone new to the hobby. Started with no idea what to do and now I am set up just waiting on my resin to come in. Thank you!
I ordered my on m3 because I wanted a resin printer for a good beginner print since there's a little less of user error to be made I personally think. This video helps a lot as for the basic of it I'm looking forward to getting it delivered and using it for my business of printing figurines and the detail I want is in this printer. maybe down the road after I get used to this one ill go to the m3 max for bigger prints but for now this one should be a good starting one for me. Thanks for the in depth of the printer and how it works.
THUMBS UP for me!
Good luck with your printing!! looking into getting one myself for business use
Mine is being delivered today!
The machine already has a screen protector already applied. It even said so on the pieces of paper you were showing. That other screen protector si an extra one that you get for applying once the first one gets wasted.
Is there any diffrence between the green and the orange cover of the anycube?
All these guys reviewing this printer keep tearing off the screen protector 💀
I've got mine a few months ago and it's the best buy I ever had,,,easy to use and stunning results
Hi,how is the machine?Do yoı advice buying it?
Nice video for someone like me who isn't all that familiar with resin printing.
I've had mine just about two weeks now my first ever msla I've got 4 fdm and bro I thought fdm had details pppssssshhhh ffff lol. I fing love it.
there is a very important notice on updating the firmware on this model machine . putting that build plate on the screen not a good idea that paper should of been down first. .
not sure why people lift the build plate z up to put resin in, look like a accident to happen, can you not press home then lift z up very little then pour your resin on your build plate and that all so lets you know it cant be over the vat max line .like your video
Great video for complete beginners like me, thank you!
THANK YOU SO MUCH FOR SOWING THE POWER BRICK!!!!! Looked online for ages trying to find the power requirements.
You should NOT wash resin in the sink as it's a serious environmental hazard. You need to properly dispose of it, typically by curing it in UV light before disposal but it can't go down the drain.
I was wondering about that as I watched this one. Good call and thanks for the heads up.
Good tip to give newbies, but I wonder, what do all the people do with their water containing resin from washing off prints?
Nerd.
It absolutely can go down the drain. It's very easy to do.
@@Jokerkiller064 newbie (bout to be in like a month since I bought this same printer yesterday) here, but I guess is the same as water with paint from brushes, or the isopropyl used to wash it too. The ammount of resin in there is really minimal anyways so it won't be a big bother or "oopsie I just took 0.2 hours of mother Earth's life". Still if you care you can leave it in UV light, prob will cure any resin in there.
just orderedd this as my first ever printer good good deal with cure kit
few days later im having nothing but but problems with this now prints raft succesfully model starts printing after raft it just sticks to fep plate tried over 8 times now clean plates re leveled ext i have no idea whats going on
nice video today also. just so nice to see your videos
This printer seems to be an upgrade to my Nova3d Bene4 mono. I like the feet and size of the vat with 4k screen. I hate the FEP style with the plastic one piece design. I don't think the M3 plus has that and don't understand why companies keep doing this. I would have no issue with it if the FEP that came with it was nFEP. The Bene4 mono had the same proprietary FEP system, but I managed to get around that nonsense with a laser cut metal replacement from a manufacturer on ebay. I have seen reviews already saying that there have been leaks from their fep system which is why they push the protective LCD cover hard on this printer. Hope this isn't true.
Do you know if the mono x has ”better” fep design?
@@ericohman I know it doesn't use the built-in frame. That means you can install nFEP which is superior to what anycubic puts in there frame style FEPs.
Очень крутой и информативный обзор!
С голосовым переводчиком от Яндекс, не пришлось читать )))
Спасибо огромное автору!
Thanks man!! Very useful unboxing!
I'm pretty sure that there is already a screen protector on the machine and the one that comes in the little box is a replacement if you get a leak. You may want to verify that with the manufacturer
There is one installed. I had a leak I my vat and thought I messed up my screen. Ordered and new one, just to find out the old one had a screen protector the entire time. 🙃
this may be th reason why my prints fail because i installed th second screen on the first one
Mine had one installed, but it was all scratched up so I had to use the spare. Not sure if that was normal or not. My FEP was also marred up too and notified anycubic about it. Supposed to be getting a replacement in the mail but it's taking awhile.
Is it me or does it resemble a 70's/80's popcorn machine! LOL
Great video. It helped me make my purchase decision. M3 ordered :)
what a great video. I've been interested in this one for a bit and this video makes me want it more haha
Thanks for a great video!
where did the elve chin's go?
In the tub.
He had no supports, so that part didn't print correctly.
Really nice 🙂
The mask in the pack is useless for the fumes. If anything, it will be for avoiding saliva droplets to fall on the tube.
I bought it.Thank you
Great video!!
30:51 that little broken guard to the right #sadge
So when do you use the UV light? Just a little confused, does it use the light as it prints or do you put the print after with the light?
That's my doubt as well.
did it come with a pre installed screen protector? I'm not sure if I peeled mine off before I installed the protector it came with or did I just remove the protection for the pre installed? I am ggetting a lot of failed prints and thinking to just remove the protector. Also, didn't install the protector very well there are lots of air bubbles which might be effecting it.
Great video
28:26 *DON'T WASH RESIN IN A SINK. WATER WASHABLE DOESN'T MEAN NON TOXIC*
Where would you wash it?
@@Javifrom303 Same place you'd wash normal resin with IPA, just with water. Or spray it off with a hose into a bucket. Then just leave the bucket in the sun. The resin in the water will cure and the water will evaporate leaving scrap you can just throw away.
Amazing!!!
Great video thanks!
Hi, thanks for the video. I just bouth the same printer and your video was really helpfull. After months of use what do you think about this printer? Did you update the firmware or using it as it is?
Hi,how is the machine?Do yoı advice buying it?
UV - ULTRA VIOLENTLY, Ok Got it! LOL
Thanks for the video!!! Do you have a video on how to make your own models, new images. Thanks
looking crysp Vlad
Lately everything I've been printing from mine has been coming out like the supports are broken. I am lost at what is going on. I really haven't changed much other then doing the set up like it said from the box. I only adjusted the setting a little bit due to the normal box setting not working for me. I thought maybe I didn't set the plate right or to low... but so hard to find anything with Anycubric at the waterwash resin.
Compare resin 3d printer vs filament roll. Which one print better? I have filament roll 3d printer and sometime the model came out not good, but i wondering if resin can support to print strong material like nylon or carbon fiber.
I feel i have the knowledge to answer this so i will. Resin printers can’t print thermoplastic’s like nylon but there are “tough” resins that have a higher strength than standard resins, and some resins can even outperform filament printers. I have a resin from 3dmaterials that i am currently trying that is glass fibre resin, and I’ve tested some super tough resins too. Another thing to consider is that resin printers give almost the same strength on all 3 axis whereas filament printers are weaker on the Z axis. Hope this helps. (My yt tiger3dprinting might be able to help you a bit more with this with some tough resin reviews and also soon will be a project using a resin printer)
Nah it won't make that type of materials but there is some resins that are abs like material. Resin machines are mostly for small figures or something that you won't be using to smack someone it will break. They are use for small and really good looking stuff with no lines and accuracy. The filament ones cant do really small details and figures unless you really have the settings on point but even that it won't be as good ,but large objects are better on filament and with better materials
I got the "Zero" one, but threw second hand. Everything works just didn't get software, where would I find that? I tested it threw your video, all the way up to print bc I didn't receive a USB w it.
What app/software do you use in making 3d objects? Can you recommend any good one? Im a newbie and planning on buying a 3d printer but i guess i have to study how to make 3ds first.
Anycubic never more!!!
Great video! From your experience, which slicer do you recommend?
Is there a diffrence between the green and orange version of the anycube or are they the same and only the color is diffrent?
I just received my M3. Can someone give me some guidance on how to transfer images to the Photom Workshop? Is there a website to transfer 3D models from? Thanks in advance
Hi,how is the machine?Do yoı advice buying it?
I would like to do a 3d scan of a statue and use my soon-to-receive Photon M3 to make a 3D print. What type of file format do I need to save it under? I'm confused about the different information I am reading. Thanks
Which one do you suggest this or creality halot one pro/plus
Hi,how is the machine?Do yoı advice buying it?
@@mustafakostekli4027 hi there I got the halot one pro but I didn’t use it much. I just printed maybe five or six objects because I am merely an FDM printer., I can see if it’s a nice printer or not because that’s the only resume printer I have, but I really like the Wi-Fi I feature
@@AMForouzani I bought it
i got mine about a moth ago
Hi,how is the machine?Do yoı advice buying it?
@@mustafakostekli4027 it's fine but I would look at some of d models like the d1 or 2. I don't know if there are any other d model.
The photon m3 is a nice for the price
Hola, gracias por el video, tienes la configuración de la resina para prusaslicer?
This printer is only compatible with chitubox, not prusa
Can you suggest a type of UV resin to 3D print a GoPro mount? Thanks!
Why do some Anycubic Photon M3s have a green lid? Are the specs different?
Hello guys I bought this printer few weeks ago and i want to ask some thinks .
Can anyone explain me what is abrasive or crinkle mode and how can use it in me printer? (Anycubic photon m3)
So you need to
Clean the build
Plate each time too? Soap and water?
Only when you take the resin out. If you are done with a print and have left over resin in there, then you can just leave it. It will stay uncured as long as you don't expose the printer to Sunlight or other UV light
🔥💕👌👍
I'm printing the test file, "required resin: 3mL"
seems like thats not very much? Is 3mL all thats required to be filled? or is that how much it uses and then you filter the rest of the resin back into your container?
Hi,how is the machine?Do yoı advice buying it?
I got my Photon Ultra a couple of months ago. Seems to be developjng 'bald' areas on the build plate with progressively intrusive adhesion problems. Any advice here?
sand the build plate. bought the m3 last week and had also the same problem. i sanded it and i have no problems anymore. using the metal scraper is a good thing for your plate. there are youtuber saying use the plastic one. use the metal one
Look into Wham Bam System plates. They are flexible and allow you to seperate the build without having to use a scraper.
@@kypdurron6168 what grit? Wet? Dry?
@@steveg2277 nail sanding stick. i have no sandpaper
Hi,how is the machine?Do yoı advice buying it?
Hey Bro from which website did you download the models that you printed as the Eiffel Tower? Thanks
Hello, I bought the same printer, and I ran into a problem: the models stick very strongly to the FEP film, because of this, the models tear off and break. I don't even know what to do
Replacing the FEP film didn't help, changing the print settings doesn't help either
I've been printing on another MONO SE printer for several years now, and I've never had such problems.
Have you ever encountered a similar problem?
how many layers are you adding to your base?
@@atutahistar I think I might be having this issue too. My is 0.050 and alot of times I get empty supports on the end or only half a model.
Did i need manual leveling before every print?
Would this be any good for 2mm figurines for wargaming en masse
Question. After you turn the knob of the build plate in 15:00 min mark, did you lock the 4 bolts at the side?
No these are for leveling 12:25
@@allffrommars6019 ah okay. So the only time you locked the 4 bolts like what you did at 12:43 min is for the purpose of levelling. Thanks for the info.
which is better Anycubic photon 4K or the Anycubic photon M3? am confused which on to buy please help..
Probably too late for ya but I went with the M3 cuz they are both 4k but the M3 has a bigger build volume ¯\_(ツ)_/¯ It comes in the morning and I’m stoked!
Hey I just order mine how is yours holding up?! Do you recommend any settings after set up for mini. I plan to use lychee!! Cheers mate
What is the frog model?
can you recommend websites where to download prints/files (pm3) for a Photon M3?
Hi,how is the machine?Do yoı advice buying it?
I just received my printer. Unfortunately it was shipped without the resin I ordered. Can anyone advise on compatible resins other than anycubic.
Just about any will do, make sure it's 405nm. Elegoo is a fantastic product
@@danehelland5562 thank you for the advice.
Just ordered..wish it wasn't yellow lol :(
Hi,how is the machine?Do yoı advice buying it?
Salve , ho fatto la prova, ma non Stampa.
From where is this model? 28:12
www.thingiverse.com/thing:2314063
Mon imprimante se levait et se baissait mais rien ne s'est collé. Du coup, il n'y a eu aucune impression
First
ايش رايكم ياعرب؟
what site do you use to get files
Thingiverse, cults 3d, yeggi , myminifactory..
But i also suggest etsy
Hi,
****DO NOT BUY THIS MACHINE****
Thank you for your videos They are very detailed and informative. I just wanted to leave this comment on a machine you reviewed and talked about it in your video and I think that people should know this about this company before they buy this product.
I tried to purchase the Anycubic photon Mono M5s and I found out that the discounts and offers they have on their website are all fake. The company is not an American company (which is ok) and is not located in US either. It is in Hong Kong but yet they charge Tax (LOL) even much higher rate than Uncle Sam does. They pocket the tax. They charge a lot for shipping as well. They offered a coupon of $60 worth for $10 and they don’t give you the access to use it until a few days later. Actually later after they charge you, they give you the restrictions. They didn’t let me use the coupon on the machine while they have special on it and said that is not available for this machine. 3 days later and they said you can only use it on this machine and only after the price has gone up. They raised the price of the machine $100 and now they say that I can use this coupon. Every email I sent them they didn’t respond right away and when they did they didn’t answer any of my questions and only send me a message about how I should buy the machine as soon as possible. I will not trust this company and buy any expensive machines if they are not responding to any concerns or question. Basically their warranty doesn’t mean anything either.
why no ventilation!
The resin is still toxic so not to be poured down the sink waste pipe.
do NOT wash any resin in the sink.
Just don’t listen to this channel!!!!
Why?
Hi,
****DO NOT BUY THIS MACHINE****
Thank you for your videos They are very detailed and informative. I just wanted to leave this comment on a machine you reviewed and talked about it in your video and I think that people should know this about this company before they buy this product.
I tried to purchase the Anycubic photon Mono M5s and I found out that the discounts and offers they have on their website are all fake. The company is not an American company (which is ok) and is not located in US either. It is in Hong Kong but yet they charge Tax (LOL) even much higher rate than Uncle Sam does. They pocket the tax. They charge a lot for shipping as well. They offered a coupon of $60 worth for $10 and they don’t give you the access to use it until a few days later. Actually later after they charge you, they give you the restrictions. They didn’t let me use the coupon on the machine while they have special on it and said that is not available for this machine. 3 days later and they said you can only use it on this machine and only after the price has gone up. They raised the price of the machine $100 and now they say that I can use this coupon. Every email I sent them they didn’t respond right away and when they did they didn’t answer any of my questions and only send me a message about how I should buy the machine as soon as possible. I will not trust this company and buy any expensive machines if they are not responding to any concerns or question. Basically their warranty doesn’t mean anything either.