How to Replace Rear CV Axles 2013-2018 Toyota RAV4 2.5L L4

Buy Now!
New CV Axle Assembly Set from 1AAuto.com trq.video/ib-1...
New CV Axle Assembly from 1AAuto.com trq.video/ib-1...
This video shows you how to install new rear CV axles from TRQ on your 2013-2018 Toyota RAV4 (2.5L L4). A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
Estimated installation time for a professional technician is approximately: 5 hours 36 minutes
This repair was done on a 2015 Toyota RAV4 LE 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Toyota RAV4
2014 Toyota RAV4
2015 Toyota RAV4
2016 Toyota RAV4
2017 Toyota RAV4
2018 Toyota RAV4
Tools you will need:
• Flat Blade Screwdriver trq.video/ob39...
• Pry Bar trq.video/oanp...
• 16mm Wrench
• 17mm Wrench trq.video/oawM...
• 10mm Socket trq.video/occt...
• 17mm Socket trq.video/ocHL...
• 21mm Socket
• 22mm Socket trq.video/oyf-...
• 30mm 12-Point Socket trq.video/oaK-...
• 32mm Socket trq.video/ofw-...
• Axle Fork
• Brake Caliper Hanger trq.video/oqx-...
• Brake Spring Tool
• Pickle Fork
• Tie Rod Fork
• Needle nose pliers
• Needle nose pliers trq.video/oNt-...
• Pliers
• Wire Cutters
• 1/2 Inch Impact Gun trq.video/oDU-...
• 3/8 Inch Impact Gun
• Ratchet trq.video/ocIH...
• Torque Wrench trq.video/obIS...
• Block of Wood
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags trq.video/o6t-...
• Copper Anti-Seize
• Gloves trq.video/ob4u...
• Safety Glasses
• Center Punch trq.video/oou-...
• Floor Jack trq.video/oa2W...
• Hammer
• Jack Stands trq.video/oaMx...
• Large Hammer
• Pole Jack
• Rubber Mallet
• Wheel Chocks
• Wire Brush trq.video/oDV-...
Subscribe: / @trq
Check out our playlist:
Toyota RAV4 2013 - 2018 4th Generation: • Toyota RAV4 2013 - 201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.