PERFECT for what I want- refinishing old tables, need a way to sand legs evenly - this is great! Going to build one one, and save a lot of money. Thank you!
Boa noite meu amigo: tô passando por aqui pra, te agradecer por essa maravilhosa dica; e também dizer que: já vou montar o meu torno ., com as suas docas é claro!! Parabéns.
I'm sorry...The projects I do are based on the references of those who have gone before and follow my needs. I'm not good at drawings. Thanks for watching!
Thank you. I will take note of it However, I think the size of the project will depend on the needs of processing different types of wood and wood size
1:23 I am confused how your part is not thrown away (with your fingers) after improper routing (feeding your part in the wrong direction). Probably you are lucky.
Any Chance you can give us the cut sheet for this project? I have been looking at making a drill lathe for cork fishing rod handles and this would be perfect!
Thank you for watching! It's an old project I worked on a long time ago. You can based on the size of hand drill you have and your lathe purpose to get the right project size, I did the same 😄
Mitä liimaa käytit työssäsi. On erittäin hyvä sorvi. Kiitos. Täytyy tehdä itselle myös.
PERFECT for what I want- refinishing old tables, need a way to sand legs evenly - this is great! Going to build one one, and save a lot of money. Thank you!
Simple, effective, well designed. Awesome 💯👍😎
Te doy las gracias por enseñarnos y mostrarnos esas geniales ideas Desde Barcelona un cordial saludo
muy Buen trabajo . Carlos Nuñez de Azul, Buenos Aires, Argentina
Thank you!
Excelente dica. Parabéns pela objetividade e clareza.
Great work. Good to have a drill that has a knob to change the speed, rather than have to set up a screw to do that.
Great job. Thanks for showing an easy way to do small projects
Mahtava video. 👏 👍
EXCELENTE!!!!!!! 1000 LIKES!!!!!!!!!!
Thank you!
Serviços de qualidade com a mesma coisa que você tem que ter conseguido
Mashaallah khub valo video......
Muito top parabéns pelo o projeto vou tentar reproduzir um pra mim obrigado pela a aula.
Ottimo,lo stesso mio progetto 😁😄
This is awesome. Simple and clear. Appreciate it. Liked and subbed :)
You are a genius
Keren bro. Inovasi tiada henti
wow..great work🤩🤩🤩
Lo felicito siga con su mente creadora que va muy bien .
Parabéns, simples e objetivo!!
👍👍👍👍
Mantap gan...!!
Kreatifitas yang sangat luar biasa,,, 👍👍
por favor qual o tamanho ou medida
nice project sir, i like to build one for myself.. can i ask, what is the size of bearing you used?
Do you use that long pinky nail to scribe lines on wood.?
I love your work, friend, it hurts that they don't work out for me 😭😭😭
Amazing!
Nice and may JESUS bless you
Kreatif om ,luar biasa ,, 🙏⭐ moga sukses ya ⭐
Terima kasih telah menonton!
Great job looking forward to viewing more of your work.
Thank you!
Me gusta gracias
It is very cool.
Boa noite meu amigo: tô passando por aqui pra, te agradecer por essa maravilhosa dica; e também dizer que: já vou montar o meu torno ., com as suas docas é claro!! Parabéns.
❤🙏🙏🙏👍
VERY GOOD
This is great. Do you have plans and material downloads?
I'm sorry...The projects I do are based on the references of those who have gone before and follow my needs. I'm not good at drawings.
Thanks for watching!
Só tenho a agradecer deixo por conta de vocês
Meus parabéns amigo inscrição e like garantido 👏
Thanks!
Super 👷👍
Muchas gracias
terimakasi atas sering nya bos q..
another one ! waw ! very good job ! we would need a special video with the dimensions of each achievement ! it will be cool !
Thank you. I will take note of it
However, I think the size of the project will depend on the needs of processing different types of wood and wood size
哟去i儿哦u哪妈去i哪asi
Me encanta pero quiero saber las medidas de cada corte por favor se lo agradezco y gracias por compartir tu trabajo
What are all the measurements to all the pieces of that lathe you built? I want to make my own.
it's easy if you watch how it's made and it's not rocket science
@@phil3332 ok what are the measurements then por favor
That's great,i want to know.
Very good. Do you have the necessar plans with dimension stc. for download? Thanks. Dieter
Boa noite .Vc fez os rebaixo no dois sarrafos qual fresa que vc usou ..
Mantap👍👍😄.
this is awesome! what did you use in the drill chuck for a bit to hold the workpiece?
It's a forstner bit
Buena idea
Muy útil gracias de casualidad tiene planos con medidas gracias
gostei muito, mas queria saber se o ponto de apoio e sem treinamento?
nice muito bom
basico facil gracias profesor
This was super enjoyable to watch. Also that circular saw jig is the same style as mine. Cheers. 💯
Omdraai driabank
I perked up when I saw that 😅
I need something like that for mine
Perfec
I like this video. Very good and educative
Thanks!
Acho melhor a ideia do que é possível gostaria
Parabéns esse jig ficou top
obrigada, vc foi super acertiva na mensagem espiritual. felicidades 🎉🎉🎉🎉
Gostei do material e do suporte como ferramenta beleza bom demais
Design a tool rest that will get right up to the work. the closer the better
.esta muy buena la idea
Good job 👍🙏
Thank you!
Parabéns ótimo trabalho
Great video! Great lathe! Keep it up brother.
Thank you!
Do you need a high torque drill or high speed?
thanks for this excellent idea, just a stupid question if i want to make four legs how are you going to copy from the first one. Thanks pj
Use a caliper
👍👍👍👍👍👍👍👍👍
Класс люблю урок труда с детства
Esse sim para eu executar
No dimensions mentioned. Also I I might be wrong but a drilling machine isn't supposed to turn clockwise
Right. thank you I will readjust it.
Lllllll
It does turn clockwise and anticlockwise you might have another model!
It doesn't need dimensions, it's a simple build.
They have reverse
Did u use hammer drill for the lathe?
Great job. Thank you. subbed.
Mat pagi mas kalo boleh sampe harga berapa. Siap pake sa borya itu pokokya aku tingL pake berapa harga sampe kalteng agro indomas ?
👍👍👍🤝
I need a cue lathe repair please
I think that Fostner bit needs sharpening
bagus sekali
Meu amigo quanto custa uma bancada de tornear madeira por favor??
😊😊
😁😁
Gostaria muito leva meu jeito quero este modelo
1:23 I am confused how your part is not thrown away (with your fingers) after improper routing (feeding your part in the wrong direction). Probably you are lucky.
What kind of drill bit is that?
Counter sink or auger bit
Any plans.
Do you have measurements for this?
Mr H, what do you use your pinkie nails for....? Why are they so long, it does not look nice.
This I what I'm looking for
Thanks for watching!
Toop Tooop
Can't you make nail clippers?
🙏🏾🙏🏾👍👍
Please mention the dimensions of the wood piece that you used for this project
Olá pode passar as medidas por favor
Any Chance you can give us the cut sheet for this project? I have been looking at making a drill lathe for cork fishing rod handles and this would be perfect!
Thank you for watching!
It's an old project I worked on a long time ago. You can based on the size of hand drill you have and your lathe purpose to get the right project size, I did the same 😄
Quardar este vídeo
Plans???
💕👏💐👌🙏🌹😊😊
So no sizes?
Mint no fA ya mas .
I don't know how to send you a photo or video but I'm doing it like you but it doesn't look the same and I was disappointed in myself 😭😭😭😭😭
Thank you for watching!
Most of the projects I've done are also unsuccessful at first, we are not experts, Wish you soon success with your projects.
OK 👍🏻 !
Thanks!
Still working? (the drill)
Só não passou as medidas