+Smooth-On Would this work on (Survivor for Samsung Galaxy Tab 4 8.0 - Black - Polycarbonate, Silicone - 72" Drop Height). I want to paint the case a different color than the current one and I wanted to know if it would stick one permanently to the case because whatever else I tried wouldn't work.
Smooth-on, Can the Novacs matte be used alone...Baby being cast in ecoflex 20..will be painted in the psycho paints..silicone tinted with flesh and flocking...Can I airbrush the matte after all is said and done to give her a matte surface ? Thank You
It is the complete A and B together and then the desired amount of NOVOCS. You can always reach out to our technical help team if you have material questions. www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!
Can someone explain to me why my result is glossy and not matte? I had a leftover which after evaporating had some powder residu, so the powder is in there.
Psycho Paint offer only few colors... what if I need to paint for example Dragon Skin silicon with "steel" color such as Alclad II Steel... I know this color will crack and gets off. Is there some way? Perhaps mixing it with smth or is there any steel color for Dragon Skin?
Hey Smooth-On. Sorry if this is long, but before I go spend $500+ I want to be sure I'm right, or if there is a different route I need to take. I am in need of Novocs, Silc Pig, and Psycho Paint products to paint over Dragonskin. However, what scares me about using it...like in this video and others...I've noticed what comes out of the airbrush is barely anything. The amount of layering needed to get the color is off putting. Is that just due to the amount of NOVOCS? Would I just use less Novocs? The more I would thin it out the less opaque? I'm hoping for a much thicker opaque quicker use of getting the colors on the dragon skin. I know I can pigment the dragon skin with silc pig. But I will be painting designs and gradients of lots of different colors on to the dragonskin that covers a fairly large surface. I need to be time efficient and per this video...I would not be. Any suggestions? I'm ready to buy all the above AS LONG AS I can be more opaque with the airbrush. Maybe not these particular products but you have others that would work? Please and thank you so much for future response.
Hi Alexis. The art of painting silicone requires any different types of techniques both via airbrush and standard brush. There are some great tutorials from Stan Winston Studio which outline these as well as some good Facebook groups for silicone mask making where people discuss painting silicone.
when you are looking to achieve a matte finish, it is somewhat easier to airbrush the silicone. Left over mixed material, when sealed, only lasts a few hours, as the silicone is still curing, even in the solvent. It is best to mix up a small batch at a time.
Hi There, any size will work, just keep in mind that the airbrush will need to be cleaned out immediately using NOVOCS to keep the silicone from curing in it.
Hi I had cast a doll head and started the paint job with fuse fx paints. I then decided to root the hair on the head and it became oily and sticky. I shampooed the whole head after rooting and the oil came off. My question is: can I use alcohol or mineral spirits over the painted areas to make sure it doesn't get oily? Thank you very much for your help!
Smooth-On, Inc I think I asked this question somewhere else and don't remember where, but what would cause silicone paint not to stick to the platinum silicone? I painted an area and the rest of the face cured well except the lips. I then cleaned the lips with acetone and airbrushed it but after curing overnight it still had areas that did not cure. What could cause this? Thanks
Do you have any tutorials on these materials or have these materials on ur site ive never heard of them and confused about how to use them and where to get them
You can check out the rest of our tutorial videos on our TH-cam channel here: th-cam.com/users/SmoothOnInc Our materials are available worldwide through a network of distributors. A list of our distributors is available on our website here: www.smooth-on.com/distributor.php
Would this work on homemade moldable silicone a-la the King of Random's recipe of 100% silicone and corn starch? Could you make a sculpture out of that into a glossy finish?
Hi can this product be used by itself to remove silicone paint from a silicone doll? I painted a silicone doll the paint cured but I want to remove it, I used part a and b and sil pig colors
Hi im a reborn artist and im using clsy to sculpt the baby but i want the actual finish product to be silicone. Because of that i want to know what material i should use to make the mold for the clay and then the silicone doll.
MyMastershake, you can use a gypsum plaster or epoxy mold to cast the silicone baby in. You can use another silicone for the mold, but these generally requires a specific release which may make painting difficult.
Hi, can this be applied to a silicone bodysuit or would the Dragon skin or eco flex be better? I want to try and get the colour more to my own skin tone. Also how much coverage would you get from an 8oz kit?
@@mikaylasnow2963 Hi, I did not get an answer to this as such and was just told I could try it and see, however I have not gotten round to testing it out due to being busy.
This sounds stupid, but, I'm going to buy a new phone case and I want to paint the silicone parts of the case blue. I've read to use nail polish for painting silicone but there are no tutorials on the internet. I know the kind of paint used in this video is overkill for what I'm trying to achieve, but, I was wondering if there's something else out there to use on my case recommended by the pros. Thanks.
im trying to paint the words on off and defogger and the defogger switch of an old car and the words are wearing off but they are on soft smooth rubber and then the switch lever is in the middle, do you this this paint mixture would work for the on and off word details on that piece
i am making a fake hand using mold star 20T. the hand needs to be a realistic color. how should i tint the silicone before pouring it into the cast. what liquid should i use to tint it.
Devon O'Leary Smooth-On's Silc Pig. You can mix that into Part B. Be aware that Silc pig is very concentrated. After Part B and the Silc Pig is mixed together with no stration in color, add Part A and cast that into the mold. That will give you at least a base color. Dont forget to spray your mold with their Ease Release 200!
+Stephen Westbury I want to make a realistic dummy head for special effects. I've seen some medical prosthetic clinics use powder to give their pieces a "soft" finish. I'm not sure where to get this and I was hoping you have what I'm taking about available. *Could I seal this powder in once I have done the proper base and detail color work?*
Smooth-On ok so if i stretch the rubber silicone the paint wont get distorted somehow? how does it work? ive tried painting tank bands with acrylic and the acrylic came right off
Psycho Paint is mixed together, pigment is added, and is is applied to a platinum silicone. It permanently bonds to platinum silicone: th-cam.com/video/29QgZVEhETo/w-d-xo.html
I was searching for a curing silicon (the base on which you brushed). I wanted to it to be highly flexible like the one shown in the video or if possible more flexible and soft. Could you suggest some of your products which will meet my requirement
It will thin down any silicone, but works very wee in Psycho Paint. It is a substitute for toluene, with zero VOCs. Toluene is getting more difficult to obtain in some areas, and a zero VOC solvent like NOVOCS is a good offset.
Hello! how much novocs i need to use for my psycho paint as a thinner if example my part A and Part B is 500ml? Thanks!
This would depend on how you are applying the paint, and personal taste.
Hello, I am wondering if you use this with psycho paint to get a matte finish on something it still remains skin safe after it dries?
Yes it would be skin safe ater it cures.
Learn how to achieve a matte or gloss finish on painted silicone using NOVOCS solvent and Psycho Paint - bit.ly/1fTad8h
+Smooth-On Would this work on (Survivor for Samsung Galaxy Tab 4 8.0 - Black - Polycarbonate, Silicone - 72" Drop Height). I want to paint the case a different color than the current one and I wanted to know if it would stick one permanently to the case because whatever else I tried wouldn't work.
Ok thank you. Also when using this does it require a respirator?
It is recommended to use an organic vapor respirator when airbrushing with NOVOCS
Smooth-on, Can the Novacs matte be used alone...Baby being cast in ecoflex 20..will be painted in the psycho paints..silicone tinted with flesh and flocking...Can I airbrush the matte after all is said and done to give her a matte surface ? Thank You
?Hi Mary, you would mix NOVOCS Matte with Psycho Paint without color to give the final piece a 'sealing' coat of matte clear silicone.
300 Novocs compared to a one part ...like A or B or 300 of the complete mixture of A+B?
It is the complete A and B together and then the desired amount of NOVOCS. You can always reach out to our technical help team if you have material questions. www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!
Can someone explain to me why my result is glossy and not matte?
I had a leftover which after evaporating had some powder residu, so the powder is in there.
Would a siphon air brush be better for this since you will need more paint base and Novocs?
Either type can be used.
Psycho Paint offer only few colors... what if I need to paint for example Dragon Skin silicon with "steel" color such as Alclad II Steel... I know this color will crack and gets off. Is there some way? Perhaps mixing it with smth or is there any steel color for Dragon Skin?
Friends, please tell me what can be replaced by a matte solvent NOVOCS?
Hey Smooth-On. Sorry if this is long, but before I go spend $500+ I want to be sure I'm right, or if there is a different route I need to take. I am in need of Novocs, Silc Pig, and Psycho Paint products to paint over Dragonskin. However, what scares me about using it...like in this video and others...I've noticed what comes out of the airbrush is barely anything. The amount of layering needed to get the color is off putting. Is that just due to the amount of NOVOCS? Would I just use less Novocs? The more I would thin it out the less opaque? I'm hoping for a much thicker opaque quicker use of getting the colors on the dragon skin. I know I can pigment the dragon skin with silc pig. But I will be painting designs and gradients of lots of different colors on to the dragonskin that covers a fairly large surface. I need to be time efficient and per this video...I would not be. Any suggestions? I'm ready to buy all the above AS LONG AS I can be more opaque with the airbrush. Maybe not these particular products but you have others that would work? Please and thank you so much for future response.
Hi Alexis. The art of painting silicone requires any different types of techniques both via airbrush and standard brush. There are some great tutorials from Stan Winston Studio which outline these as well as some good Facebook groups for silicone mask making where people discuss painting silicone.
Hey thanks for this, one quick question, could you spray a rubber inner tube?
Would this formula work for a brush-on application?
If I have mixture left over can it be stored? If so; what would be the estimated shelf-life?
when you are looking to achieve a matte finish, it is somewhat easier to airbrush the silicone. Left over mixed material, when sealed, only lasts a few hours, as the silicone is still curing, even in the solvent. It is best to mix up a small batch at a time.
What size of nozzle do you recommend? What is the smallest size that will work well? Thanks!
Hi There, any size will work, just keep in mind that the airbrush will need to be cleaned out immediately using NOVOCS to keep the silicone from curing in it.
Thank you so much for this information! It was impossible to find :)
How would I get a gold color for painting with this kit? Do you offer gold or shimmery pigments? Thanks!
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Can I add more of the silc pig to make the final product more pigmented?
Yes, you could.
Hi I had cast a doll head and started the paint job with fuse fx paints. I then decided to root the hair on the head and it became oily and sticky. I shampooed the whole head after rooting and the oil came off. My question is: can I use alcohol or mineral spirits over the painted areas to make sure it doesn't get oily? Thank you very much for your help!
Cleaning with mineral spirits would be our recommendation.
Smooth-On, Inc I think I asked this question somewhere else and don't remember where, but what would cause silicone paint not to stick to the platinum silicone? I painted an area and the rest of the face cured well except the lips. I then cleaned the lips with acetone and airbrushed it but after curing overnight it still had areas that did not cure. What could cause this? Thanks
Do you have any tutorials on these materials or have these materials on ur site ive never heard of them and confused about how to use them and where to get them
You can check out the rest of our tutorial videos on our TH-cam channel here: th-cam.com/users/SmoothOnInc
Our materials are available worldwide through a network of distributors. A list of our distributors is available on our website here: www.smooth-on.com/distributor.php
Can Novocs matt be used with fusefx clear paints as a final layer to matt down please .
Would this work on homemade moldable silicone a-la the King of Random's recipe of 100% silicone and corn starch? Could you make a sculpture out of that into a glossy finish?
This technique is designed for platinum cure silicones only.
if you use the matte diluent, do you still need to use mattifying powder in the finalization?
in case for skin effect
Depending on the look you want, you can use one, the other, or both.
Hi can this product be used by itself to remove silicone paint from a silicone doll? I painted a silicone doll the paint cured but I want to remove it, I used part a and b and sil pig colors
No, it would not be able to remove cured silicon from other silicone surfaces.
Hi im a reborn artist and im using clsy to sculpt the baby but i want the actual finish product to be silicone. Because of that i want to know what material i should use to make the mold for the clay and then the silicone doll.
MyMastershake, you can use a gypsum plaster or epoxy mold to cast the silicone baby in. You can use another silicone for the mold, but these generally requires a specific release which may make painting difficult.
Will this solvent and paint work on other companies platinum based silicones ?
It would work on other platinum silicones but the softer Silicones generally work the best
What about tpe?
Hi, can this be applied to a silicone bodysuit or would the Dragon skin or eco flex be better? I want to try and get the colour more to my own skin tone. Also how much coverage would you get from an 8oz kit?
Did you ever test or get an answer to this?
@@mikaylasnow2963 Hi, I did not get an answer to this as such and was just told I could try it and see, however I have not gotten round to testing it out due to being busy.
This sounds stupid, but, I'm going to buy a new phone case and I want to paint the silicone parts of the case blue. I've read to use nail polish for painting silicone but there are no tutorials on the internet. I know the kind of paint used in this video is overkill for what I'm trying to achieve, but, I was wondering if there's something else out there to use on my case recommended by the pros. Thanks.
You may want to try a 100% silicone caulking thinned with mineral spirits.
im trying to paint the words on off and defogger and the defogger switch of an old car and the words are wearing off but they are on soft smooth rubber and then the switch lever is in the middle, do you this this paint mixture would work for the on and off word details on that piece
0:33 I wonder why it's called Psycho Paint?
Hello,
I need help,
Using airbrush, I spray psycho paint and novocs matt,mixture, but to come out of the nozzle is white dust.
why?
Thank you
It sounds as though you may be using too much solvent. Please submit a support ticket here: www.smooth-on.com/support/ticket/add/agree/
that's right, too much in my solvent mixture. Thank you
How do you clean out the airbrush afterward?
+Alissa Cromar Using more NOVOCS
Are there any other solvents to evaporate the psycho paint? Except Novocs and toluene?
Minseral spirits can work as well, but takes a long time to evaporate. Also, acetone and alcohol WILL NOT work.
i am making a fake hand using mold star 20T. the hand needs to be a realistic color. how should i tint the silicone before pouring it into the cast. what liquid should i use to tint it.
Devon O'Leary Smooth-On's Silc Pig. You can mix that into Part B. Be aware that Silc pig is very concentrated. After Part B and the Silc Pig is mixed together with no stration in color, add Part A and cast that into the mold. That will give you at least a base color. Dont forget to spray your mold with their Ease Release 200!
+Stephen Westbury I want to make a realistic dummy head for special effects. I've seen some medical prosthetic clinics use powder to give their pieces a "soft" finish. I'm not sure where to get this and I was hoping you have what I'm taking about available. *Could I seal this powder in once I have done the proper base and detail color work?*
+cscott You can use makeup powder available from makeup effects suppliers, or use standard talc.
which silicone is the best for masks?
Ecoflex 00-30 is very popular for this application.
@@smoothon thanks
how do you finish or paint stretchy rubber without paint cracking?
Using a stretchy paint like Psycho Paint on silicone rubber gives a stretchy paint. For urethanes, our Ure-Coat works well as a paint.
Smooth-On ok so if i stretch the rubber silicone the paint wont get distorted somehow? how does it work? ive tried painting tank bands with acrylic and the acrylic came right off
Psycho Paint is mixed together, pigment is added, and is is applied to a platinum silicone. It permanently bonds to platinum silicone: th-cam.com/video/29QgZVEhETo/w-d-xo.html
I was searching for a curing silicon (the base on which you brushed). I wanted to it to be highly flexible like the one shown in the video or if possible more flexible and soft. Could you suggest some of your products which will meet my requirement
I would take a look at our Dragon Skin or Ecoflex products: www.smooth-on.com/product-line/dragon-skin/ www.smooth-on.com/product-line/ecoflex/
Is it like toluene? Like a psycho paint thinner?
It will thin down any silicone, but works very wee in Psycho Paint. It is a substitute for toluene, with zero VOCs. Toluene is getting more difficult to obtain in some areas, and a zero VOC solvent like NOVOCS is a good offset.
@@smoothon can you use this for pearl ex pigments too? Instead of silicpig
Wouldn't this harm someone if you glued the prosthetic to someones face and then airbrushed it.... because of the solvent that's in it?
Troy, this process is for prop pieces or prosthetics before they are applied.
Is the psycho paint air dry
It is a 2-part system which cures after the 2 parts are mixed together.
Ok thank you
Psycho Paint cures, it doesn't dry. The A&B components mix together to cure into a flexible rubber
Whats the pot life once mixed, and then what's the cure time once applied?
Ty!!!
You're welcome!
would this work on say painting a timing belt on a car?
No, that is a different type of rubber.
can I paint this on my outsole of my shoes?
Thank you for watching! In all likelihood, it would not bond.
What's the name of the spray gun used?
This is a Paasche-H airbrush.
Smooth-On, Inc
Hey, Cool. Thank You.
OO
OOOOOOOO
Im the first one to comment!!! This is really cool!!!