The owner of the led bar i bought some years ago also put on a repair kit on the led bar. And he used super glue on the ends like a lot, so the pins got broken in the new repair. So for anyone thinking of using super glue on the repair, I would like to say “stay away from that glue”. Use the melting glue guns.
This is a great video! Just finished this work today. Easy install. Yes, the cables are litle bit boring and tricky, but in general this is a great step-by-step content. Thank you Jonas 🎉😊
Thank you, Jonas!! Just finished this repair and your video gave me the confidence I needed to get it done. It was tedious but everything went smoothly and now I have a functioning light bar again. Appreciate you taking the time to make the video to help others!
Thanks for making this video, Jonas! Ordered my repair kit from H. Blom this week and plan to make this a weekend project in the next few weeks. Your video took alot of the uncertainty and fear out of it for me and I appreciate you taking the time to help the rest of us.
Great video! You can actually remove the broken screw by heating it with a soldering iron untill it starts moving and unscrew it with a narrow jaws pliers. Did it on my light bar.
Great video, did mine today the wiring is very frustrating 😑 but worth the effort. Your video is much better than paper instructions, keep up the 1st class work 👏🏻 👍🏻 👌🏻
I Did it two weeks ago with the same kit, fan and screws. Be careful when connecting wires to the controller board. I accidentally broke one connector lever somehow and had to order new kit. I didn't replace inner leds. They were working fine. The most tricky part was pushing new outer led wires through :D
Hi jonas.another great video.light bar along with led plate lights look awesome mate.you must still be so pleased to have been able to purchase this car fully loaded.been doing some rust prevention work on my 9-3 today
Bra jobbat. Du kunde väntat att dra ut kablarna till dom yttre leden, sen kunde du tejpat på dom ny kablarna o sen dragit igen dom nya kablarna lättare.
Thanks for the clarification, it's very helpful. Nevertheless, I have a question in the video in your repair kit there is a fan, but when I want to buy this fan from H. Blom I don't get the same fan shown in the picture, when I compare it with yours it is not identical. Why is that? I would be very happy to receive an answer. Best regards, H. ipek
Just wondering - ledbar back cover is not really that tight, it still got some holes (for cables i.e). Wouldn't it be enough to drill two-three more holes so the moist could easily evaporate and not to install the fan?
The owner of the led bar i bought some years ago also put on a repair kit on the led bar. And he used super glue on the ends like a lot, so the pins got broken in the new repair. So for anyone thinking of using super glue on the repair, I would like to say “stay away from that glue”. Use the melting glue guns.
Thanks for the heads up
This is a great video! Just finished this work today. Easy install. Yes, the cables are litle bit boring and tricky, but in general this is a great step-by-step content. Thank you Jonas 🎉😊
Thanks 🤝
This is the best video guide for this repair on the Internet. Perfect.
Thank you, Jonas!! Just finished this repair and your video gave me the confidence I needed to get it done. It was tedious but everything went smoothly and now I have a functioning light bar again. Appreciate you taking the time to make the video to help others!
Nice! Now only need a 9-5 NG Aero XWD! 😁
Thanks for making this video, Jonas! Ordered my repair kit from H. Blom this week and plan to make this a weekend project in the next few weeks. Your video took alot of the uncertainty and fear out of it for me and I appreciate you taking the time to help the rest of us.
Thanks, good luck with the repair 👌
Great video! You can actually remove the broken screw by heating it with a soldering iron untill it starts moving and unscrew it with a narrow jaws pliers. Did it on my light bar.
Great video, did mine today the wiring is very frustrating 😑 but worth the effort.
Your video is much better than paper instructions, keep up the 1st class work 👏🏻 👍🏻 👌🏻
I Did it two weeks ago with the same kit, fan and screws. Be careful when connecting wires to the controller board. I accidentally broke one connector lever somehow and had to order new kit. I didn't replace inner leds. They were working fine. The most tricky part was pushing new outer led wires through :D
I did the LED- job on my 9-5 today and your video really helped me. Thanks!
Awesome 👍 Nice to have it fully functioning again 🙏
Hi jonas.another great video.light bar along with led plate lights look awesome mate.you must still be so pleased to have been able to purchase this car fully loaded.been doing some rust prevention work on my 9-3 today
Thanks, i really am 🙏 Great that you keep the Saab well maintained 👌
Thanks for a great tutorial! I have an og 9-5 but watches your videos (instead of taking care of my own car) as always. 😅😉 Trevlig helg!
Haha trevlig helg 👍
Nice!!
Can you do a added reverse light on the left side installation/upgrade kit as well? :)
Maybe 😉
Thanks Jonas.
Hi, your videos are really well done, congratulations.
Bra jobbat. Du kunde väntat att dra ut kablarna till dom yttre leden, sen kunde du tejpat på dom ny kablarna o sen dragit igen dom nya kablarna lättare.
Var någon innan som sa att original satt limmade och inte gick att dra ur. Men märkte det själv att det gick fint sen 😉
Thanks for the clarification, it's very helpful. Nevertheless, I have a question in the video in your repair kit there is a fan, but when I want to buy this fan from H. Blom I don't get the same fan shown in the picture, when I compare it with yours it is not identical. Why is that? I would be very happy to receive an answer. Best regards, H. ipek
Contact h blom, The video is old so there might be a newer version 👌
Hello Jonas Would it be possible to show how to remove the Light Bar from the car.
Hi, it sits with 5 x 10mm nuts and 2 clips 👍🏼
Hello Jonas looking at the Logic Board with the H Blom logo on top the 3rd black slot on the LHS is not required. At 15.38 in the tutorial.
Ser man ju vem man ligger bakom sen ju 😁😉👍.. Snyggt
Bra jobbat Jonas, som vanligt 😊, har du nån video med 3rd broms ljus reparation?
Vet faktiskt inte 😂 har bytt på 2st och det är. Väldigt enkelt
@@JonasKakarikas kanske för dig
Jag får prova i alla fall 😃
@@JonasKakarikas och en fråga till 😀
Hur vet man när man ska använda reparation kit eller byta hel ljus ?
Man byter hela så slipper man det problemet sen.
hblom.se/product/saab-9-5-2010-2011-3rd-brake-light/
@@JonasKakarikas förlåt, jag tänkte på led bar , tredje broms ljus jag redan köpte hos Henrik 😀
Tobias häll gjorde typ samma nyss. På TH-cam! 😃
Perfekt, då finns det fler att välja mellan 👍
Just wondering - ledbar back cover is not really that tight, it still got some holes (for cables i.e). Wouldn't it be enough to drill two-three more holes so the moist could easily evaporate and not to install the fan?
A few has drilled small holes in the glas for the licensplate lightning and it works without a fan
@@JonasKakarikas good to know, thanks.
Hello can you tell me how I can get more turbo boost from the 2.8l xwd.stock boost not enough ,,but without any mods.or maybe what you suggest ?
Only way is to tune it... New ecu software
Vart köpte du lamporna till reggljuset?? Fast and furious store?
Nej dom är från ebay båda två och har legat hemma i några år 🤣