The table was vibrated. The superplasticizer we use is Advacast 530 from Grace products. I also recommend Advacast 555, that can be bought at Delta Performance Products or BlueConcrete. They also carry color pigments.
Hola Derek , excelente trabajo , me gustaría saber que clase de componentes utilizó en la mezcla y que porcentaje de cada uno. Saludos desde Argentina !
Great video . just to make your life easier if you are going to make some more put some sticky tape over the screw heads makes them so easy to get out once you peel the tape off .
excellent work congratulations I would like to know what is the mixture they use if it is gray cement with sand or that please put greetings from caracas venezuela
I am trying to make a trough sink for the bathroom. I want it to sit on the counter like a vessel and I cannot find out how to make the mold. It needs to be flush on the bottom..do i just make two boxes
Hi Derek, may I ask what mix of concrete you used? Is it a standard slab mix but just dryer?, Your mix seems to be quite dry.I presume that is to avoid holes caused from too much water. Thanks from down under. Dean
I have watched your video over 20 times in the last week. Reasons - 1. I plan to build a dual-basin bathroom countertop in the near future and want to learn from others; 2. I can't get enough of the guitar soundtrack. Would you please share the name of artist and song title. Thank you. Great video!
Without diagraming, the best way to create a slot drain is to ramp it or slope it to the back side. It doesn't have to be a drastic ramp, just enough to create pitch and guide the water back. If you want a photo on how to create a slot drain, email me at meckls16@yahoo.com
Hey! Great you tube video. I was wondering if you could explain the formwork you made for inside the sink. I have been trying to wrap my brain around doing something like this with an easy to remove void. Looks like you figured that problem out. Any advice would be great appreciated!
Yes, no polishing. The material one pours against will give you the finish and so does the sealer one uses. The trick is too have a mix design that doesn't have bug holes in the surface.
Great to see your process and the finished product. Thanks for the video!
Best concrete countertop I ever seen great video
The table was vibrated. The superplasticizer we use is Advacast 530 from Grace products. I also recommend Advacast 555, that can be bought at Delta Performance Products or BlueConcrete. They also carry color pigments.
The work is by Crepusculum, and the song is A Fledgling Firework. I love the whole video, my wife just loves the music.
This video was made 2 1/2 years ago and we have reformed our sink plug fabrication process. We use a resin made for surfboards now.
Correct. We use a fiber called Control by Nycon that disperses in the dry mix.
beautiful work
Hola Derek , excelente trabajo , me gustaría saber que clase de componentes utilizó en la mezcla y que porcentaje de cada uno.
Saludos desde Argentina !
Nice setup. Incredibly nice job overall.
That is STUNNING!!!!!!! Best one I've seen on TH-cam yet. Impressive 👏🏻👏🏻👏🏻👏🏻
Great job, guys! Thanks for sharing
Great video . just to make your life easier if you are going to make some more put some sticky tape over the screw heads makes them so easy to get out once you peel the tape off .
Whatever concrete is cast against, it will mimic. The material we poured on was masonite with a gloss finish.
This video was super informative! Thank-you.
Hey Derek, your concrete counter top looks great !! so could you tell me what kind of concrete mix did you used ? Thanks video was great ....
Nice work...what kind of material was used to frame up the layout?
Wow!!! Awesome. Will follow this vid to make one. Thanks
excellent work congratulations I would like to know what is the mixture they use if it is gray cement with sand or that please put greetings from caracas venezuela
where is the support for this countertop And the sink ? it will broke & crake down !!
thanks for sharing you guys rock
Gente eu preciso de profissionais q façam isso aqui no Rio de Janeiro!!! Esta muito difícil de conseguir!
Ciao ti scrivo dall Italia 🇮🇹 complimenti ...mi puoi dire che materiale hai usato? È semplice cemento?
@JAStewart That is curious. He's very talented. I enjoyed your display too btw.
Thank's
Hola que clase de componentes utilizaron en el premesclado
Very impressive. Excellent soundtrack too. What is it?
I am trying to make a trough sink for the bathroom. I want it to sit on the counter like a vessel and I cannot find out how to make the mold. It needs to be flush on the bottom..do i just make two boxes
Que pasó no le pusieron varilla se les va a romper
can you tell me which materials you use
Hi Derek, may I ask what mix of concrete you used? Is it a standard slab mix but just dryer?, Your mix seems to be quite dry.I presume that is to avoid holes caused from too much water. Thanks from down under. Dean
What type of mix did you use. I missed the reinforcing. Was the table vibrated because that mix flowed very well. Thanks tho... very helpful.
We work with polyester resins and make the same but faster, more nice and versatile. Are PE resins restricted in your area?
I have watched your video over 20 times in the last week. Reasons - 1. I plan to build a dual-basin bathroom countertop in the near future and want to learn from others; 2. I can't get enough of the guitar soundtrack. Would you please share the name of artist and song title. Thank you. Great video!
Go to Envato Elements. They carry sound tracks in many different styles. Lots of it is for free. Link below:
elements.envato.com/?
Great video. Can you please advise how to create a slot drain in the bottom as opposed to the traditional circular drain shown in your video?
Without diagraming, the best way to create a slot drain is to ramp it or slope it to the back side. It doesn't have to be a drastic ramp, just enough to create pitch and guide the water back. If you want a photo on how to create a slot drain, email me at meckls16@yahoo.com
Thanks for the info. Will do. Thanks Derek!
I took some photos. I'll email them to you when I get a chance.
That would be great Derek. Thank you!
+chris vario id also like to learn how to make a slot drain. Want to surprise the wife with a bath remodel. thanks.
wowwww, maravilloso trabajo
Hola como logran esa terminacion de superficie pulida?
I am impressed, this will help me to make mt "L" shaped bar top ;-)
@goredesignco Thanks, not a great gore design, but I will get there someday.
Hey! Great you tube video. I was wondering if you could explain the formwork you made for inside the sink. I have been trying to wrap my brain around doing something like this with an easy to remove void. Looks like you figured that problem out. Any advice would be great appreciated!
th-cam.com/video/jZ7VktbLq40/w-d-xo.html This will give you a good idea of how to do it.
What concret did you use. It looks very strong.
kromnis7 yeah, I like to know too.
Was there no polishing required? Got to love that if so.
Yes, no polishing. The material one pours against will give you the finish and so does the sealer one uses. The trick is too have a mix design that doesn't have bug holes in the surface.
carrying material mixture because I want it to do that it is what leads me very interested in
Вибростол сделайте ребята,и всё пойдёт гораздо приятнее
Nice
Amazing
what are the ingredients of mortar, and dosages ??
Is Hoffa in there?
Damm that's cool
@patrickbaty1
Curiously, the artist is called Fred Baty, ie shares your surname.
what's the white sheet that you're using on the face of the concrete called?
TheAsianVillain melamine board
MELAMINE
Рецепт смеси можно узнать ?))))
did you buy or make the sink form
Keegan Smith they made it.
Quiero ese trabajo en mi baño
Espetacular
Hello,
How do you get the shiny face?
Muy interesante
Nice video but no mention of the ingredients. If you want to share, share it all or don't share it
很好的想法 工法
Класс !
錢多 你們鈔票用印的嗎?
Like if you thought this was a tech deck video!
Dry mix what exactly? ... Pointless video