About the glass polishing, dont you just need glasscut pads, cericoat and rotary/da for minor scratch and pitting removal? And few hours of your time... its literally 40$ or less for all if you got rotary or da... and I could do that few times before replacing windshield, and thats 200$ replacement
Do a glass polishing guide, I dont mean the cleaning bu the actual minor scratch removal and maybe the micropittin gon the glass. Some people including myself have to replace windshield once a year, 2 years if you can bear the extreme amounts of little dots going into sunrise. Even though it does take like 2-3 hours of lolishing alone to get that out with cerium oxide polish and glass pads its cheaper than replacing glass.
This was enjoyable to watch. It was like you filmed me in my own shop! Copying your methodical efficiency techniques made my install process look identical! With how easy C6 applies, I've never had a high spot on a customers vehicle. I did, however, make a purposeful one on a spare hood to see how difficult it would be to remove once cured.... a wool pad alone was NOT enough! Wet sanding, polishing, and reapplying was the only way for me. Thanks for another wonderful process video! It's nice to see John back in the videos too!
JOHN THE 🐐! 🎉 Yvan is too shabby either 😂
😂
Thank you.
I'm ready for another awesome instructional video💯💪
Thank you.
Very relaxing video today
Thanks!
Any recommendations on how to fix small “rock” chips? Great job on the car and video!
We go over it here.
I understand the less is more theory with the app polish, but would you recommend 2 drops per panel with 2 passes?
That’s too much.
Thank You all
Thanks for watching!
how much would it typically cost for a car that size to do the job you guys just did? , thanks love the videos
Most detailers will charge $1500 and up.
What coating do you recommend for a work truck that stays parked outside everyday. Hydro lite or 8/3 stack?
Thanks in advance.
Our 8 year is great for that
Forgot to ask you can you use the 8 yr coating on the leather seat of a motorcycle?
No, use DIY Detail Interior Ceramic Coating .
My garage isn’t heated, I was wondering what temperature would be too cold to apply a ceramic coating?
50f or above
About the glass polishing, dont you just need glasscut pads, cericoat and rotary/da for minor scratch and pitting removal? And few hours of your time... its literally 40$ or less for all if you got rotary or da... and I could do that few times before replacing windshield, and thats 200$ replacement
We only Polish to clean.
Why did you avoid the light lens’s?
We didn’t, they may have been a victim of editing
Looking forward to this one
Thank you.
Very nice. 🎄
Thanks, Merry Christmas!
Do a glass polishing guide, I dont mean the cleaning bu the actual minor scratch removal and maybe the micropittin gon the glass. Some people including myself have to replace windshield once a year, 2 years if you can bear the extreme amounts of little dots going into sunrise. Even though it does take like 2-3 hours of lolishing alone to get that out with cerium oxide polish and glass pads its cheaper than replacing glass.
Having polished many windshields, today it’s generally less expensive to replace.
Liquid PPF would be cool
It exists already, www.claritycoat.com
I wouldn’t be surprised if John was offered a job.
lol
Wait, where's Nick 😢
Since it was C6 Ceramics , John stepped in.
@diydetailofficial oh I understand! Great video guys 😊
This was enjoyable to watch. It was like you filmed me in my own shop! Copying your methodical efficiency techniques made my install process look identical! With how easy C6 applies, I've never had a high spot on a customers vehicle. I did, however, make a purposeful one on a spare hood to see how difficult it would be to remove once cured.... a wool pad alone was NOT enough! Wet sanding, polishing, and reapplying was the only way for me.
Thanks for another wonderful process video! It's nice to see John back in the videos too!
Thank you.
Let's go
Thank you.
Why do you always choose white color cars for these videos? Painful to look at and we can't see a thing.
We have detailed many different colours.
Looks like a great product but not for an armature 😢
Did you mean amateur?
Definitely not for an armature.. too many loops.
We have C6 Ceramics Hydro Lite for enthusiasts
What coating do you recommend for a work truck that stays parked outside everyday. Hydro lite or 8/3 stack?
Thanks in advance.
The 8 year