4:36 - The 90mm has to be measured between the barrel adjuster (plastic part over the end of the cable housing) and the clamping bolt - NOT the blank end of the cable housing.
Nice that the anchor is removable from the old cable and attachable to the new one. I’m sure that makes a replacement cable a lot easier to find (even if the thickness is off by a bit). Sad to hear Sram is out of the internal geared hub business - I think they’re so ingenious. I guess that leaves Shimano, Sturmey-Archer and Rohloff.
Trying 2 Take Old Cable Or Try 2 Fix Old One Been Trying 2 Take A Part The Sram S7 Grip Shifter Not Much Luck. Great Video By The Way. Have Done The Sram S7 On The Bk Wheel. My First Time In Doing This Make Of Bike Any Advice Would Help Many Thanks M England Will Try And Send Video If That May Help Take Care All Best .
Hi Dan do you happen to know if the spring inside the click box can be purchased ? The replacement unit I ordered 2 years ago from one where on the internet has decided it hated life and corroded in half.
SRAM S7 or P5 clickbox are all faulty design, too much plastic, not durable enough, easy to fall out. Shimano is better. I got one like this but it did not work any more and is very expensive to replace.
These videos are important. There is very little information about these hubs anywhere. Thanks Dan
4:36 - The 90mm has to be measured between the barrel adjuster (plastic part over the end of the cable housing) and the clamping bolt - NOT the blank end of the cable housing.
Thank you! My cable was 90mm as measured in the video and I was pretty confused.
I think the 90 mm is when the klick-shifter is in 4th gear ... as I remember it is in 1st but the ~111 mm in 1st gear apperently is as good
Nice that the anchor is removable from the old cable and attachable to the new one. I’m sure that makes a replacement cable a lot easier to find (even if the thickness is off by a bit). Sad to hear Sram is out of the internal geared hub business - I think they’re so ingenious. I guess that leaves Shimano, Sturmey-Archer and Rohloff.
If you can find some of those other brands when available. I’m having a hard time finding Nexus 8 speed with roller brake.
Thanks for the video Dan.
Hi Again The Bike Is A Centurion Challenger 6061. Thanks M England.
Trying 2 Take Old Cable Or Try 2 Fix Old One Been Trying 2 Take A Part The Sram S7 Grip Shifter Not Much Luck. Great Video By The Way. Have Done The Sram S7 On The Bk Wheel. My First Time In Doing This Make Of Bike Any Advice Would Help Many Thanks M England Will Try And Send Video If That May Help Take Care All Best .
Lovely explanation! 👌
Useful! Thx Dan
90 mm with the klick-shifter in 4th gear
Very nice video thanks for sharing
Hi Dan do you happen to know if the spring inside the click box can be purchased ? The replacement unit I ordered 2 years ago from one where on the internet has decided it hated life and corroded in half.
110 mm is okay?
SRAM S7 or P5 clickbox are all faulty design, too much plastic, not durable enough, easy to fall out. Shimano is better. I got one like this but it did not work any more and is very expensive to replace.