For those who want to do this install on a 2005-2007 Xterra, the factory kit isn't compatible anymore. (The switch is for 08 and newer.) However you can order an OEM switch (Standard Motor Product: CBS-1668) and buy after market lights or get a used set, and the mounting hardware. (Nissan used Velo brand lights) I chose to buy a used OE set as the quality is higher. Most used units have one screw tab broken off. This is fine as you only need one. Just make sure the good tabs are on opposite sides and you'll have a working pair. With those parts in hand, Ry makes the rest easy with this excellent video! Install was a breeze! Thank you, Ry for this and all your excellent videos.
Awesome! I'm in disbelief how simple this was, had no idea the wiring harness was already in place for this. I will definitely be getting some fog lights to add to my Xterra :) Thanks!
Awesome videos brother !! It's so nice to watch the job before actually doing it. Many Thanks !! Just a friendly tip that was passed on to me and i pass onto others is turning screws backwards first with plastic anchors. Most of the time these threads are made the first time the screw was installed. Turning it backwards until you feel a bump allows the same threads to be used instead of cutting new ones over the old ones.
My granddaughters xterra has hazed headlight assemblies, and the turn signal stalk is worn and doesn't turn off when the wheel is turned. Ry has shown the bumper cover has to be removed to replace headlight assemblies. This video shows it would be easy to install fog lights while the cover is off, and when replacing the worn turn signal stalk, use one with a fog light switch. Great video!
Thank you!! Just did this on my 2019 Frontier today. Good old Nissan--everything's the same! I just sneaked in through the plastic fender wells and all was good. Referred to your video when I got confused attaching the fog lights. You saved me!
Good info. I recommend a simpler, quicker way. All I did was turn they wheel (to give you more room) then remove the retainer screws (3ea) on wheel well. Pull back the plastic and after that you’ll have easy access.
Thanks for the video! With the Frontier there is no need to remove the bumper. Just move tires with starting wheel and you’ll have a few screws and you’ll have access through the back of the bumper. The wires should be hanging instead of tied up. Thanks again!
I have a 2014 X model. All the literature I read said my model DID NOT have pre-installed wiring. Well last night some jerk stole my cap/cover and I look inside and saw what I thought looked like a plug...well sure enough, looks like my Xterra DOES have wiring pre-installed! So maybe I'll be getting new lights instead of a new cap/cover!
Oh man, that sucks! Hope you get everything you need. One thing I would say is take the front bumper cover off and make sure nothing else is damaged. A lot of stuff is hidden by those plastic bumper covers. They bounce back very easily.
Thank you so much, you have saved me a lot of money and time. Purchased a 2006 nissan xterra a few months ago, and even though I looked it over good I discovered a lot of problems, needless to say this is when I found you. Just got finished installing my OEM fog lights, no stress and fuss. Thanks so much. I have changed my headlights, PDM, had to repair the drivers side window, and I am still not done. The Evap is giving me a code and the catalyst converter as well.. when I have time I work on it.. thanks so much.
You should make a video installing steering wheel controls on an Xterra that doesn't come with them, using a Metra's ASWC-1 adapter. There are some guides on thenewx forums but the pictures are gone. A video would be great!
this is cool ! this is the second video i have ever watched from you and now i feel like i have to confidence to go to a "u-pull=it" and salvage a "kit". Thank you!
@@800ccc that harness does not exist it only came out for the 2014 or 2015 models but you might as well just add an LED light bar that will give you more light if you want lights on the roof.
Thank you! That's exactly why I make these videos. Its super rewarding to work on your own car (not to mention a hell of a lot cheaper) and I want others to feel that way too. Good stuff.
Really great job explaining how to do these jobs, do you know of a way to make fog lights stay on, separate of the other lights. My Frontier fog lights only operate on low beam.
Hi from Oamaru New Zealand. I have a similar setup in my 2012 Nissan Navara D40 diesel (Frontier in U.S.A). Anyways I sustained big damage from a farm dog left loose at night which I hit at 60 m.p.h. It was cheaper for me to buy and install a new "Ironman" Commercial deluxe Bullbar which has all new lites on plus protection.
@@Rythecarguy Dog saga was when dogs were on heat (in season) but farmer left it loose to roam. Dogs here on farms are cattle or sheep herding dogs. Regarding the Navara D40 diesel the closest for you to buy in left hooker is out of Spain if you can. I'm running mine on Amsoil Signature series diesel oil and gear oils. The moment I changed it, it was way quieter and smoother. I'm very lucky to had purchased this as my 2008 jeep Wrangler diesel JKU was costing me $1500 per year with random issues and gear shift lever popping out of linkage which made it very dangerous so I opted to park it up then finance the Navara for 3 yrs. In that 3 yrs it's so reliable it only cost me for a set of Toyo open country A/t tires, diesel milesl tax, fuel etc. Carl
Not sure if this has mentioned, for Frontier, you don't need to take off the grill or bumper. You can do this under the wheel well. Just turn your wheels left and right.
I've noticed the lights don't fit tightly against the bumper housing. I'm thinking about putting some type of weather stripping around the housing so it has a good seal around the lights.
You did that like magic, it was good to watch. i have the latest nissan juke n design 2021 mod. but came out without fog lamps in the front , though have the place for them. can it be done practically the same way , and could you tell me where to get a kit? thank you .
Best how-to videos out there. Headlights and fog lights went in exactly as you said. However, the steering column switch I ordered through the link on your page was slightly different and doesn't fit. I'm hoping they will let me return or exchange just the switch since the fog lights are already installed. Also, I didn't take off the front bumper entirely. I unscrewed everything from the top and sides and as it was hanging, it exposed the work area enough to do the job. Thanks again for great videos. Any advice on the switch would be welcomed.
For anyone who want to put fog lights on Nissan PATHFINDER r50 00-04 or 05 (GCC ) what you need is fog light turning stock (make sure that if your stock has a auto mode to get one that has auto with fog switch cuz it's different than the one without auto) and front fog relay ,after that it's plug and play
I have a 2006 Pathfinder and would like to know if these steps would be similar so I can install fog lights on my Pathfinder? (sorry if this question have been asked before. I didn't read all the comments)
Wow, you made that look easy! One of the best "how to" videos I've ever seen, thanks!~ ONE question. I want to use my fog lights as daytime running lights. Can the fog lights be turned on without the headlights???
Thank you! I really appreciate that. Unfortunately if you are using the stalk then you cannot. You could however wire these to a switch. Then supply the power from a source that turns off when the car is off.
Dude your such a badass... thanks for making everyones life so much better" very professional video's keep up the wonderful video's jay miami florida....👍
Thanks a lot! One of the (actually the only) mounting screw point of my fog light snapped, so gotta repair that plus make a new mounting point, this video helps A LOT! I appreciate it! Bring on the epoxy :D
Hi i have a frontier 2006 metal bumper and have the wire for the fog light. My question is you change the switch light because the model of the exterra don't have the switch for the fogs to work with the oem wired. Do you know the wire color or number the fog oem switch use to turn on the fogs. Only if i don want to by the whole ligth switch, i want to do it with a external switch but with the oem wire. I hope i explain my question. Thanks great video
Hi! Have you heard of the SMOD on these xterra’s? Does it affect all 2nd gen version? And can you make a detailed video on how to switch the coolant hoses and transmission cooler hoses please. Thanks a lot!
Yes it affects second generation Xterras. No I cannot make a video. It only affects automatic transmissions since they have the trans cooler. The manuals do not and mine is a manual. Thanks for watching!
SMOD does not affect all 2nd gen Xterra's, only those made prior to the 2010 model year and are equipped with automatic transmissions. In the 2010 model year Nissan introduced a new radiator with a different part number and SMOD is not a problem on 2010 model year Xterras and newer.
Most of the kits I see have a toggle switch that replaces one of the blank switches in the dash. Aren't those just as good?, and no need to mess with a new stalk.
I would love to add the pro 4x off-road factory lights on top. I wonder if that is also pre wired. I’ve looked to videos for that application but all I find is led or light bar installs, which I’m not fond of.
Ry that video was very very very very helpful...l have a question?.. on a 2008 Nissan armada se that can without fog lights does the same steps apply for the Amana as Nissan Xterra?..
Now...how about the 2006 nissan frontier SE. It has the wiring but having issues with the switch. Just wondering if it's the same way or do I have to replace the whole column system
@@OnePancho no, so I took a chance on my idea, go ahead and put fog lights in, on the column...just change only the blinker switch. It has locking clips. You will see. Just buy the one for your truck that's close. The trucks are made to have them, they just dont install them to lower the cost of the truck. Let me know if you need further information
Excellent friend, I will do it with my xterra. I never put these fog lights on it. Now I know I can do it myself. What brand can I use and that is compatible with the size that my xterra needs?
Greetings ry,I have a 2007 nissan xterra se.can you please tell where exactly is the turn signal relay.i hear the clicking but I can't pinpoint where it is.please help.I will most greatly appreciate it.
Love the videos Ry, I’ve gotten into most of the work on my 2011 frontier cause of these. Question for you, recently my fog lights won’t turn on. I replaced the 15a fuse and battery fuse and still no luck. Bulbs are both fine. Any ideas? Is there an independent relay?
I have a 2016 nissan frontier without foglights.I watched this video and was wondering if this was true.I pulled off the plastic caps and I looked inside and I had the wiring inside.So what web site I can get the turn signal/ foglights?
Off topic- have you encountered the following lights coming on and staying on? ABS VDC SLIP I have no brake issues that I’m aware of. Changed my front pads (using your video, great btw) And no other symptoms.
Unfortunately I have not. However if you check out the xterra forums or the facebook groups there is usually a lot of material on it. You are not alone!
Not sure why this wouldn’t work on my chrome/metal bumper. It has plastic casing where the fog lights go on my 2007 Frontier. I don’t see any other purchase options out there anywhere for the chrome bumper fog light kit.
Hi I know this is a really old video, but I'm praying someone is still reading comments- at 6:19 you're holding the fog light electrical connector- it branches off from another bundle of wires... can you tell me what that bundle leads to? I was in a head on collision and I'm trying to do my own repairs, but cannot for the life of me figure out what this thing is or where it's supposed to go- it's a white rectangular block, maybe 1x1x3" with two bolt holes in it. Thanks!
Hey man, I have a 2010 Xterra I did this same thing on after watching your video, but the lights don’t turn on...checked the fuses and everything I can think of, still nothing, any thoughts??
Thank you for such a great video! I found a light switch stock at the junk yard (which worked great by the way) however it also has the "AUTO" option for the Daytime Running Light System. Do you know if I could also get the dash sensor and install it on my Xterra like I did with the switch?
I was hoping to see how to remove the light gray part of the bumper (tray, I guess) Just got a push bumper and hopefully don't have to remove the whole front to install it.
There are five bolts on the bottom of that and the top just clips in. You should have no issue taking just the lower part off, but keep in mind that there is nuts more bumper under that.
I went to change the turn/light stalk and tis is a different plug. I have an 07 x and ordered the correct part. It looks like the one in your video. Help if you can. Thanks
I noticed that it shows 2008-15 Xterra, but will it also fit for the 2006 Xterra? Asking before I buy the other type with the push button which I would rather not..
I just acquired the 2007 model that comes with fog lights installed without the correct turn signal controller. I located the part from your recommended Amazon listing, 25560 ET11E, and have no ideal where to buy it. I don't want to buy the entire kit, just the right controller. Can you help?
can this be done with the car jacked up and tires taken off for easier access to the fog lights? Of course I will have some Jack Stands and wood blocks as well preventing car from dropping down. looking to do this on my 06 nissan frontier as I already added the Fog light Signal Switch So I am ready to go.
This is so helpful, but do you know if the 2016 rogue, 2005 quest and 2017 pathfinder are prewired? I just recently subscribed to your channel. Help please. Thanks.
I don't agree with how big this job was on TH-cam. I just wanted a set of running lights on my 2016 Frontier not fog lights. I just pried off the fake caps on the front and found a set of round LED running lights for around $30 on eBay. I saw the wiring harness but ignored it since I wasn't going to install the steering control. Installed the lights, ran a wire to the fuse box and tapped into a fuse that only goes on when the car is running. They look great and almost like factory install. Didn't have to remove the bumper.
Hey there, nice work. I ordered a kit that has the dash mount on / off switch for mine. I want to know what you did with your old turn signal indicator? Do you still have it? Mine is not working right and I would like to buy it from you?
Eff all that. I installed mine by turning the wheel and gaining access through the wheel well covers. Much less work. Also, I switched the bulbs to L.E.D. bulbs before i installed the assembly. Soooo much better and brighter than incandescent bulbs.
![กี่หมื่นฟ้า | Your Sky Series EP.1 [2/4]](http://i.ytimg.com/vi/qJbQs_nhjD4/mqdefault.jpg)
For those who want to do this install on a 2005-2007 Xterra, the factory kit isn't compatible anymore. (The switch is for 08 and newer.) However you can order an OEM switch (Standard Motor Product: CBS-1668) and buy after market lights or get a used set, and the mounting hardware. (Nissan used Velo brand lights) I chose to buy a used OE set as the quality is higher. Most used units have one screw tab broken off. This is fine as you only need one. Just make sure the good tabs are on opposite sides and you'll have a working pair. With those parts in hand, Ry makes the rest easy with this excellent video! Install was a breeze! Thank you, Ry for this and all your excellent videos.
Awesome! I'm in disbelief how simple this was, had no idea the wiring harness was already in place for this. I will definitely be getting some fog lights to add to my Xterra :) Thanks!
Can it work on exterra 06?
Ry you’re one of the best I’ve seen……..amazing teaching technique……clear, precise, and amazingly professional
Thanks Kenny Kenny. I appreciate it! 👍🏻💪🏻🤘🏻
hey you can access the mounting aera through fender well, without taking off whole bumper cover.....
I just looked today. There is a small access. It is a little tight but I am going to try to do it without taking off the bumper.
Good to know when i need to change the bulb
My husband is 52 years a mechanic he said that was the best ins, video he ever saw, Thanksyou
Wow! What an amazing compliment. Thank you very much. :)
I love xterras. My 2004 is such a breeze when it comes to repairs. Definitely 1 of the easiest vehicles I've ever worked on.
Second gens are not as easy but still not bad. Thanks for watching.
Awesome videos brother !! It's so nice to watch the job before actually doing it. Many Thanks !!
Just a friendly tip that was passed on to me and i pass onto others is turning screws backwards first with plastic anchors. Most of the time these threads are made the first time the screw was installed. Turning it backwards until you feel a bump allows the same threads to be used instead of cutting new ones over the old ones.
My granddaughters xterra has hazed headlight assemblies, and the turn signal stalk is worn and doesn't turn off when the wheel is turned. Ry has shown the bumper cover has to be removed to replace headlight assemblies. This video shows it would be easy to install fog lights while the cover is off, and when replacing the worn turn signal stalk, use one with a fog light switch. Great video!
:D
Thank you!! Just did this on my 2019 Frontier today. Good old Nissan--everything's the same! I just sneaked in through the plastic fender wells and all was good. Referred to your video when I got confused attaching the fog lights. You saved me!
Glad to help 💪🏻🤘🏻
Good info. I recommend a simpler, quicker way. All I did was turn they wheel (to give you more room) then remove the retainer screws (3ea) on wheel well. Pull back the plastic and after that you’ll have easy access.
I used a stubby Phillips head for accessing the securing screw.
I like the way you think
Oh yeah, much easier and it was a 20/30 minute install. If I ever do it again, I bet I could do it in 15 minutes. 👍
I did this with my 2006 Nissan Frontier XE. It was almost exactly as demonstrated... this video was a great guide! Thx!
Thanks for this I was looking for this comment I have the same truck although .one has a chrome bumper but it should be the same
Thanks for the video! With the Frontier there is no need to remove the bumper. Just move tires with starting wheel and you’ll have a few screws and you’ll have access through the back of the bumper. The wires should be hanging instead of tied up. Thanks again!
Good tips, Thanks!
This is how I installed the fog lamps on my 07 Xterra a while ago. While it is a little more cramped it is still very easy to do.
I would have done this years ago had I known the wiring harness was all there!
I have a 2014 X model. All the literature I read said my model DID NOT have pre-installed wiring. Well last night some jerk stole my cap/cover and I look inside and saw what I thought looked like a plug...well sure enough, looks like my Xterra DOES have wiring pre-installed! So maybe I'll be getting new lights instead of a new cap/cover!
@@SalvadorLosAngeles lol what an idiot he really thinks he's gonna get something from that cap? lol
@@rockermarco Get the LED version,that's what I have on my Frontier.(much brighter and uses alot less power)
I'm so glad you made this video. I just helped a deer commit suicide so now I need to replace my bumper and grill. Off to the junkyard to get parts.
Oh man, that sucks! Hope you get everything you need. One thing I would say is take the front bumper cover off and make sure nothing else is damaged. A lot of stuff is hidden by those plastic bumper covers. They bounce back very easily.
Thank you so much, you have saved me a lot of money and time. Purchased a 2006 nissan xterra a few months ago, and even though I looked it over good I discovered a lot of problems, needless to say this is when I found you. Just got finished installing my OEM fog lights, no stress and fuss. Thanks so much. I have changed my headlights, PDM, had to repair the drivers side window, and I am still not done. The Evap is giving me a code and the catalyst converter as well.. when I have time I work on it.. thanks so much.
They also fit on a 2006?
This video seems super easy to follow along with, good job 👏
Thank you! 😊 I appreciate it. Be sure to subscribe! I am posting Xterra stuff all the time.
You should make a video installing steering wheel controls on an Xterra that doesn't come with them, using a Metra's ASWC-1 adapter. There are some guides on thenewx forums but the pictures are gone. A video would be great!
this is cool ! this is the second video i have ever watched from you and now i feel like i have to confidence to go to a "u-pull=it" and salvage a "kit". Thank you!
My pleasure, thanks for watching. Let me know how it works out.
Just wanted to say thanks for the diy video. Installed the switch in like 5 mins and it works perfectly.
Heck yea, that’s great! Glad to help.
And also just forwarded your video to another member in the nissan frontier group on FB who wants to the same.
I added foglights this weekend thanks to your video. Thanks!
just got an 02 Xterra that needs some cosmetic work, i look forward to learning more tips from your videos, thanks :)
You're welcome. Thanks for watching. 💪🏻
Cool vid, and thanks! Looks easy when someone shows you. Now to reinstall the one fog-lamp.
You can also get to these from the wheel wells if you want to remove the wheel well cover.
I installed yesterday fog lights in my Nissan Frontier 2014, exactly like you showed in your video. Thanks a lot man.
Thanks for the video Ry. I was able to complete the fog light installation much faster after watching it.
I was also wondering if they made kits for the pro 4x roof lights. I've always wanted those too.
You need to drill a hole in the roof but has anyone checked if the wiring is under the headliner 🤣
@@800ccc that harness does not exist it only came out for the 2014 or 2015 models but you might as well just add an LED light bar that will give you more light if you want lights on the roof.
Just did half of this yesterday - thanks for the step-by-step!
Of course! Hope it went well. 💪🏻🤘🏻
@@Rythecarguy finished the install! I can see so much better now! Thanks for the instructions; they made it super easy ¬ daunting at all.
Hey nice I didn't know it would be that easy. I have a new project when it gets warmer!
Yea, its wild. I LOVE when car companies just use the same wiring harness for every trim level.
Thanks for the nice and informative video, I already ordered this kit from Amazon and will be installing these fog light on my Nissan frontier.
Easy Peasy. Thank you for the info. My 2014 xterra has fog lights now.
You're welcome!
Incredible video. I do all my own work thanks to you and it is so satisfying and rewarding.
Thank you! That's exactly why I make these videos. Its super rewarding to work on your own car (not to mention a hell of a lot cheaper) and I want others to feel that way too. Good stuff.
Great video! Thank you for explaining how to do this. 👍🏼
👍🏻
it looks like my frontier is mostly the same BUT i want driving lights. great instructions.
Really helpful, isthere
Really great job explaining how to do these jobs, do you know of a way to make fog lights stay on, separate of the other lights. My Frontier fog lights only operate on low beam.
Thanks for your time man. Great video. Such a clear explanation.
Thanks for all the wonderful videos! Please keep making more
Hi from Oamaru New Zealand. I have a similar setup in my 2012 Nissan Navara D40 diesel (Frontier in U.S.A). Anyways I sustained big damage from a farm dog left loose at night which I hit at 60 m.p.h.
It was cheaper for me to buy and install a new "Ironman" Commercial deluxe Bullbar which has all new lites on plus protection.
Hello from the US!! I wish we had diesel Navaras here. Sorry to hear you hit a dog.
@@Rythecarguy Dog saga was when dogs were on heat (in season) but farmer left it loose to roam. Dogs here on farms are cattle or sheep herding dogs.
Regarding the Navara D40 diesel the closest for you to buy in left hooker is out of Spain if you can. I'm running mine on Amsoil Signature series diesel oil and gear oils. The moment I changed it, it was way quieter and smoother. I'm very lucky to had purchased this as my 2008 jeep Wrangler diesel JKU was costing me $1500 per year with random issues and gear shift lever popping out of linkage which made it very dangerous so I opted to park it up then finance the Navara for 3 yrs. In that 3 yrs it's so reliable it only cost me for a set of
Toyo open country A/t tires, diesel milesl tax, fuel etc. Carl
Not sure if this has mentioned, for Frontier, you don't need to take off the grill or bumper. You can do this under the wheel well. Just turn your wheels left and right.
👍🏻
Videos like this that’s well explained it’s worth it watching it
I've noticed the lights don't fit tightly against the bumper housing. I'm thinking about putting some type of weather stripping around the housing so it has a good seal around the lights.
You did that like magic, it was good to watch. i have the latest nissan juke n design 2021 mod. but came out without fog lamps in the front , though have the place for them. can it be done practically the same way ,
and could you tell me where to get a kit? thank you .
Thank you so much I totally feel confident enough to do it myself now!
You're welcome!! Btw you can probably get to the back of the bumpers through the wheel wells and avoid removing the bumper. 👍🏻👍🏻
Any suggestions for the 2004 model? I'm buying one tomorrow and I don't think they are in already. Thanks
I'm sorry but I don't have any experience with those.
@@Rythecarguy All good man, thanks for the reply
👍🏻💪🏻
Best how-to videos out there. Headlights and fog lights went in exactly as you said. However, the steering column switch I ordered through the link on your page was slightly different and doesn't fit. I'm hoping they will let me return or exchange just the switch since the fog lights are already installed. Also, I didn't take off the front bumper entirely. I unscrewed everything from the top and sides and as it was hanging, it exposed the work area enough to do the job. Thanks again for great videos. Any advice on the switch would be welcomed.
Dude im always watching your videos on the xterra good job man
I appreciate it!! Keep watching and I’ll keep making them. Have a great weekend.
@@Rythecarguy That was the main reason I started to follow. This page has helped me and also SAVED me a lot of money..
Much love from Mexico!
Thank you! 💪🏻
.is there any way to do it without new light stalk.. maybe splicing wires together so fog lights come on with headlights?
Thank you! Just installed with great help from this vid!
Hello, did this procedure last Sunday and it works perfectly! i feel like i just discovered fire :-D thank you very much for this video. Regards!
For anyone who want to put fog lights on Nissan PATHFINDER r50 00-04 or 05 (GCC ) what you need is fog light turning stock (make sure that if your stock has a auto mode to get one that has auto with fog switch cuz it's different than the one without auto) and front fog relay ,after that it's plug and play
Can the2005-2018 frontier kit from amazon work on 2006 Nissan Xterra?
I have a 2006 Pathfinder and would like to know if these steps would be similar so I can install fog lights on my Pathfinder? (sorry if this question have been asked before. I didn't read all the comments)
Wow, you made that look easy! One of the best "how to" videos I've ever seen, thanks!~ ONE question. I want to use my fog lights as daytime running lights. Can the fog lights be turned on without the headlights???
Thank you! I really appreciate that. Unfortunately if you are using the stalk then you cannot. You could however wire these to a switch. Then supply the power from a source that turns off when the car is off.
Another brilliant review Ry learned so much with your help
Thank you Ry
Dude your such a badass... thanks for making everyones life so much better" very professional video's keep up the wonderful video's jay miami florida....👍
My pleasure man! 👊🏻💪🏻
very nice and easy install
do they make a side mirror kit that's is heated ?
I’ve actually been looking for one and I can’t find it
Thanks a lot! One of the (actually the only) mounting screw point of my fog light snapped, so gotta repair that plus make a new mounting point, this video helps A LOT! I appreciate it! Bring on the epoxy :D
Hi i have a frontier 2006 metal bumper and have the wire for the fog light. My question is you change the switch light because the model of the exterra don't have the switch for the fogs to work with the oem wired. Do you know the wire color or number the fog oem switch use to turn on the fogs. Only if i don want to by the whole ligth switch, i want to do it with a external switch but with the oem wire. I hope i explain my question. Thanks great video
Great video bud! A grade tutorial 👍🏽🤟🏽
I wonder if it's the same on a 2019 Frontier
Looks like a very similar design
Probably is all the way to 2020. Trucks haven't changed much since 2005.
Hi! Have you heard of the SMOD on these xterra’s? Does it affect all 2nd gen version? And can you make a detailed video on how to switch the coolant hoses and transmission cooler hoses please. Thanks a lot!
Yes it affects second generation Xterras. No I cannot make a video. It only affects automatic transmissions since they have the trans cooler. The manuals do not and mine is a manual. Thanks for watching!
SMOD does not affect all 2nd gen Xterra's, only those made prior to the 2010 model year and are equipped with automatic transmissions. In the 2010 model year Nissan introduced a new radiator with a different part number and SMOD is not a problem on 2010 model year Xterras and newer.
if those are glass you need to apply some kind of protective film or they will break pretty quick from rocks.
Nope, just really clear plastic.
Most of the kits I see have a toggle switch that replaces one of the blank switches in the dash. Aren't those just as good?, and no need to mess with a new stalk.
I would love to add the pro 4x off-road factory lights on top. I wonder if that is also pre wired. I’ve looked to videos for that application but all I find is led or light bar installs, which I’m not fond of.
I installed my factory fog lights going thru the inside fender wells...a little more aggravating but it can be done.
Ry that video was very very very very helpful...l have a question?..
on a 2008 Nissan armada se that can without fog lights does the same steps apply for the Amana as Nissan Xterra?..
Could you do this with a bumper light bar that's spliced into the factory plug and use the OEM steering column switch?
Already did it my dude. Here's the vid. th-cam.com/video/36cUx94BoIE/w-d-xo.htmlsi=C9JaVcrPLQkM3H0L
Thank you for the video! Would you foresee any changes or differences with a 2014 X model?
Now...how about the 2006 nissan frontier SE. It has the wiring but having issues with the switch. Just wondering if it's the same way or do I have to replace the whole column system
Did you ever get an answer or find out? I have a 2007 that I was thinking about putting fog lights on too.
@@OnePancho no, so I took a chance on my idea, go ahead and put fog lights in, on the column...just change only the blinker switch. It has locking clips. You will see. Just buy the one for your truck that's close. The trucks are made to have them, they just dont install them to lower the cost of the truck. Let me know if you need further information
Excellent friend, I will do it with my xterra. I never put these fog lights on it. Now I know I can do it myself.
What brand can I use and that is compatible with the size that my xterra needs?
No idea to be honest. I used stock fog lights off of another Xterra.
Thanks again, great video.
great stuff! Didnt know the wiring was there! Is it possible to expect a video how to install OEM cruise control? Is it plug and play as well?
No, I’m sorry but I’m not planning on that. Maybe some day!
Do you have any information if its plug and play similar to fog lights?
Hey would this work on an 07' xterra? Also great videos keep it up!
Hey man did you ever find out?
Yes this works on an 07. I did this for mine. (An 07).
Greetings ry,I have a 2007 nissan xterra se.can you please tell where exactly is the turn signal relay.i hear the clicking but I can't pinpoint where it is.please help.I will most greatly appreciate it.
Love the videos Ry, I’ve gotten into most of the work on my 2011 frontier cause of these. Question for you, recently my fog lights won’t turn on. I replaced the 15a fuse and battery fuse and still no luck. Bulbs are both fine. Any ideas? Is there an independent relay?
I have a 2016 nissan frontier without foglights.I watched this video and was wondering if this was true.I pulled off the plastic caps and I looked inside and I had the wiring inside.So what web site I can get the turn signal/ foglights?
Off topic- have you encountered the following lights coming on and staying on?
ABS
VDC
SLIP
I have no brake issues that I’m aware of. Changed my front pads (using your video, great btw)
And no other symptoms.
Unfortunately I have not. However if you check out the xterra forums or the facebook groups there is usually a lot of material on it. You are not alone!
Not sure why this wouldn’t work on my chrome/metal bumper. It has plastic casing where the fog lights go on my 2007 Frontier. I don’t see any other purchase options out there anywhere for the chrome bumper fog light kit.
Hi I know this is a really old video, but I'm praying someone is still reading comments- at 6:19 you're holding the fog light electrical connector- it branches off from another bundle of wires... can you tell me what that bundle leads to? I was in a head on collision and I'm trying to do my own repairs, but cannot for the life of me figure out what this thing is or where it's supposed to go- it's a white rectangular block, maybe 1x1x3" with two bolt holes in it. Thanks!
Any idea where can i get this lovely kit for Nissan Xterra 2005? I can't find it in Amazon nor Ebay
Wondering why you didn't go through the wheelwell panel?
I like to do things the most difficult way possible. It’s a character flaw of mine.
Hey man, I have a 2010 Xterra I did this same thing on after watching your video, but the lights don’t turn on...checked the fuses and everything I can think of, still nothing, any thoughts??
Sell it!!
@@PETERJlirot toxxiiiiicccccc
Wire them with their own separate wiring harness / switch wired from battery.
Hi man. Nice Xterra videos. I have an 06, would the column switch from 05-12 Xterra/Frontier work? Or only 05-08?
Thanks in advance.
Jeffrey D did you ever figure this out? I have an 06 as well
love your videos can you do a video on how to install heated mirror
If I can find a kit then sure!!
Thank you for such a great video!
I found a light switch stock at the junk yard (which worked great by the way) however it also has the "AUTO" option for the Daytime Running Light System. Do you know if I could also get the dash sensor and install it on my Xterra like I did with the switch?
Ohhhh I actually don't know but I love that idea.
I was hoping to see how to remove the light gray part of the bumper (tray, I guess) Just got a push bumper and hopefully don't have to remove the whole front to install it.
There are five bolts on the bottom of that and the top just clips in. You should have no issue taking just the lower part off, but keep in mind that there is nuts more bumper under that.
I went to change the turn/light stalk and tis is a different plug. I have an 07 x and ordered the correct part. It looks like the one in your video. Help if you can. Thanks
Is it possible to do it without removing the front bumper ???
I noticed that it shows 2008-15 Xterra, but will it also fit for the 2006 Xterra? Asking before I buy the other type with the push button which I would rather not..
Any idea where I can buy those small adapters. Order some fog lights but unfortunately didn’t come with none of that
I just acquired the 2007 model that comes with fog lights installed without the correct turn signal controller. I located the part from your recommended Amazon listing, 25560 ET11E, and have no ideal where to buy it. I don't want to buy the entire kit, just the right controller. Can you help?
can this be done with the car jacked up and tires taken off for easier access to the fog lights? Of course I will have some Jack Stands and wood blocks as well preventing car from dropping down. looking to do this on my 06 nissan frontier as I already added the Fog light Signal Switch So I am ready to go.
Sure! You can access it from below. Just a Little tighter.
This is so helpful, but do you know if the 2016 rogue, 2005 quest and 2017 pathfinder are prewired? I just recently subscribed to your channel. Help please. Thanks.
I don't agree with how big this job was on TH-cam. I just wanted a set of running lights on my 2016 Frontier not fog lights. I just pried off the fake caps on the front and found a set of round LED running lights for around $30 on eBay. I saw the wiring harness but ignored it since I wasn't going to install the steering control. Installed the lights, ran a wire to the fuse box and tapped into a fuse that only goes on when the car is running. They look great and almost like factory install. Didn't have to remove the bumper.
Hi bro, can you please send me the link of that fog light you ordered online, I ordered, but it has missing parts. Thanks a lot.
Hey there, nice work. I ordered a kit that has the dash mount on / off switch for mine. I want to know what you did with your old turn signal indicator? Do you still have it? Mine is not working right and I would like to buy it from you?
Any idea where I can find the hardware for the fog light?
Clip 01554-0007U
Nut 12141-0009U
Screw 08146-6165G
Ry where did u get that control arm for the fog lights and headlights in the fog light video
Awesome! I think I'll do the same to my x
Eff all that. I installed mine by turning the wheel and gaining access through the wheel well covers. Much less work. Also, I switched the bulbs to L.E.D. bulbs before i installed the assembly. Soooo much better and brighter than incandescent bulbs.
👍🏻