Hi , I do watch all your videos,so I could do my bullet maintenance myself. I changed engine oil,oil filter,gear oil, clutch side oil,fork oil and done all necessary maintenance . Thanks.
വണ്ടിയുടെ engine rpm കൂടുന്നുണ്ട് എന്നാൽ വണ്ടി കയറുന്നില്ല എന്നാണേൽ ക്ലച്ച് പ്രോബ്ലം ആണ്. അല്ലാതെ എൻജിനും വേഗം കുറയുന്നുണ്ട് എങ്കിൽ timing, tuning ഒക്കെ ആകാം പ്രശ്നം. (പ്രശ്നം പരിഹരിച്ചാൽ എങ്ങനെ എന്ന് പറയണേ)
Thanks clutch plate il first and second last plate fix cheyyunathil doubt undarnnu , now cleared first bulge plate outward M/C and second last towards m/c alle
Hi I changed the new clutch set , only the problem noticed it’s automatically loosened the clutch controls. Many times I adjust the cable and screw from gear side . After couple of kilometres there is no clutch control Pls advice me
I have also noticed it sometimes. It may be because of the first phase adaption(seating) of the new plates. Slight wear of the plates leads to heavy play to lever due to the 'leverage' provided in the mechanism. You may please tight it without any play. And we may watch. Can you update the developments....? (Or go away after finding a solution 😃)
@@avakbaraliഅത് പിന്നെ ശീലം ആകും. പിന്നെയും ബുദ്ധിമുട്ട് തോന്നിയാൽ clutch spring ഇടുമ്പോൾ ഒരു plate washer വെച്ച് ഇട്ടാൽ spring അത്രയ്ക്ക് tight ആവില്ല. അപ്പോൾ lever കുറച്ചുകൂടി free ആകും.
2 months aayi ente 1990 model Bullet use cheydittilla.. ipo start cheydapo clutch work aakunnilla.. start cheydu clutch apply cheydu gear idumbo apo thanne vandi off aakunnu, as if no clutch applied.. also at engine off position, when I try to move the bike in gear position with clutch applied, it’s not moving.. what could be the reason and how to fix it? Appreciate your advice..
വളരെ എളുപ്പം പറ്റും. ആദ്യം gear ഇട്ടു വെയ്ക്കുക... പിന്നെ clutch പിടിച്ചു തള്ളി കുറച്ചു വേഗം ആകുമ്പോൾ decompression lever apply ചെയ്തു clutch വിട്ടു engine തിരിഞ്ഞ ശേഷം de- compressor വിടുക.. ഇതാണ് നല്ല procedure
Hello fellow rider.. my 1990 model standard Bullet makes sound like a spinning motor from the clutch assembly.. it was taken to a mechanic for inspection.. he adjusted the primary chain tension and also adequately adjusted the air gap between the rotor and stator.. but still the sound doesn’t go off after starting the engine.. any idea what could that be?
@@RKR1978 thanks for the response.. in fact the primary chain was a bit loose initially when I started to hear the noise.. then tension was adjusted accordingly by tightening as well as loosening again.. however the noise remain same unfortunately..
@@pranavsurendran7700 there are 2 reasons for the humming noice, first over tightness of the chain and second touching of magneto with the core. When the chain is loose, another aound was there like wobbling of the chain.
@@pranavsurendran7700 you can check the chain tension by inserting the finger and just rotate the chain by pressing the kick lever. You should check the tension at every bit of rotation. (As the clutch bell as well as the crank sprocket may be eccentric)
Actually we can ride in slow speeds in 4 plate clutch models. Just use a thicker oil like 20-50. Or you can adjust the clutch lever play to 0. No need of 3 plate alternative for riding in such a manner.
hi. can you explain about clutch lever play to " 0 " . meaning no free play of clutch lever ? . i currently have a free play of 3 mm . i cannot ride below 40 kms in top gear without slipping the clutch. not sure whether previous owner upsized the front sprocket . i ride a 1985 CI model
Tks for ur vedio Same ellakki cheytu nokki oil nallla black ayi platil grees ayat pole oilil metalinte podi pole udd Cluth nallaa smooth ayi Oil alpamm kurajal kuzhapppamuddo
ക്ഷമിക്കണം ഇപ്പോഴാ കണ്ടത്. പ്രൈമറി ചെയിൻ കൂടുതൽ മുറുകി പോയതാവും കാരണം. അത് അയക്കണം എന്നാണ് തോന്നുന്നത്. ചെയിൻ slack അഡ്ജസ്റ്റ് ചെയ്യുമ്പോൾ ഏറ്റവും മുറുക്കം ഉള്ള സ്ഥലത്തു വെച്ച് കറക്കം നിർത്തി അഡ്ജസ്റ്റ് ചെയ്യണം. (പ്രശ്നം പരിഹരിച്ചാൽ ഇവിടെ പറയണേ )
എന്റെ ബുള്ളറ്റ്ന്റെ clutch ഇതുപോലെ ഷേക് ഉണ്ട്....... അതിന്റെ ലോക് സ്പ്രിംഗ് ഇടുന്ന ഇടത്ത് നല്ല ഗ്യാപ്പ് ഉണ്ട് അതുകൊണ്ട് ആണോ..?... Clutch പിടിക്കുമ്പോള് നല്ല shake ഉണ്ട്....
Hi chetta ente vandi start cheyth idle irikumbol clutch boxnte avdunnu orayunna sabdam und clutch lever normal temporil nilikum but kurach kazhinj free play akunu oru solution parayamo? Pinne 3 plate clutch four plate akamo?akiyal gunam undo?
@@RKR1978 ee video kandittu pinneyum oori ready aaki , thank you 🙏 , clutch hub Ile rivet aaya plate maatano? The one which is there on the inside of the hub
Bro oru doubt... Ente aduth pazhaya avl engine Thunderbird 2007 anu. Ningal ithil first um lastum ayit itta aa rand plate ille center bakam ullilot kuzhinjirkunnath. Ente vandiyil ath onne kananullu ullbakath ayitt.! Ath angane thanne ano atho miss ayathano?? Doubt 2 aa spring idunna 3kambi ille ath enteth loosanu ilakunnund ath angane thanne ano atho complaint ayathano??
വലിവ് കുറയുന്നതിനല്ല clutch plate മാറുന്നത്. Engine rise ചെയ്യുകയും ആ വേഗത്തിന് അനുസരിച്ചു wheel തിരിയാതെ power waste ആയി പോയി വലിവ് കുറയുന്നതിനാണ് clutch plate മാറേണ്ടത്.
ചേട്ടാ,3 to 4 th ഗിയയറിലോട്ട് മാറ്റി റൺ ചെയ്യുമ്പോൾ ആദ്യത്തെ കുറച്ചു സമയം (അതായത് 3 to 4 th shift cheythu ആദ്യസമയം )ഒരു പ്ലക് പ്ലക് ഇന്ന് ഒരു ചെറിയ ശബ്ദം ഉണ്ട് എന്തായിരിക്കാം കാരണം
@@arunraj2215 oil ഒഴിക്കുന്ന nut അഴിച്ചു അതുവഴി വിരൽ ഇട്ടു chain tightness നോക്കാം. ആ സമയത്തു kick ലിവർചവിട്ടി compression ൽ വെച്ചാൽ ഉള്ള tightness ആണ് നോക്കേണ്ടത്. 1/2 inch ആണ് വേണ്ട slack. പലതവണ kick lever ചവിട്ടി കറക്കി നോക്കണം. എന്നാലേ ഏറ്റവും tight ആയ അവസ്ഥ എവിടെ ആണ് എന്ന് അറിയാൻ കഴിയൂ.(chain ഇടുന്ന sprocket പലപ്പോഴും eccentric ആയിരിക്കും). Oil 20-40 ഒക്കെ മതി. SAE 30 ആണ് കമ്പനി നിർദേശം... 420 ml വേണം.
എന്റെ വണ്ടി 2003 ആണ് ഞാൻ 3plate clutch mari 4 aaki pakshe eppo clutch sidil nin payangara noise 3 പ്രാവശ്യം clutch reset ചെയ്തു പക്ഷേ സൗണ്ടിനെ ഒരു കോരവും എല്ലാ
@@rajen1437 athe chetta pazhaya ambassador carnte petrol tank cover cheyuan use cheyunathyrunu ithu enna njn kettitule spare parts shopil available ayrkum
95model nn oke 4 plate use cheyyan pattumo ? Natile workshpil 3k ahnu 4clutch iddan vendi avuna rate ? Ath kooduthal ahno 4plate use cheyumbo clutch bell marendi varumo?
ചില സമയങ്ങളിൽ ക്ലച്ച് ലിവർ ഫ്രീ ആയിരിക്കും വണ്ടി ഓടി 100മീറ്റർ കഴിഞ്ഞാൽ ക്ലച്ച് ലിവർ ഹാർഡ് ആകും പലതവണ ക്ലച്ച് അഴിച്ചു നോക്കി ഫോൾട് ഒന്നും കണ്ടില്ല ക്ലച്ച് road പൊട്ടിയോ അന്നും നോക്കി ഒരു കുഴപ്പവും ഇല്ല
@@anilkottoor gear box cover ന് വല്ല kuzhappavum😃ഉണ്ടോ എന്ന് നോക്കൂ.. ആ കവറിൽ pressure ചെലുത്തിയാണ് clutch rod clutch നെ തള്ളുന്നത്. Gear box outer കവറിൽ ഉള്ള mechanism ഒന്ന് നോക്കൂ... അല്ലാതെ എന്തു പറയാൻ 😪😪
Hi , I do watch all your videos,so I could do my bullet maintenance myself. I changed engine oil,oil filter,gear oil, clutch side oil,fork oil and done all necessary maintenance . Thanks.
Good . Don't over tight the Drain Plugs. Just tight and look for oil leaks the day after...That's all.
Yes, I do remember your words. I use tuflon tape on drain plugs . Thanks 😊
നിങ്ങളുടെ effort നു ഇരിക്കട്ടെ ഒരു ലൈക്ക് 👍👍👌
എല്ലാവരും, machine കളെക്കുറിച്ച് നന്നായി മനസിലാക്കി അർഥവത്തായി ഉപയോഗിക്കുന്ന ഒരു 'കിനാശ്ശെരി' ആണ് എന്റെ സ്വപ്നം. 😃😃🙏🙏
You're taking too much pain to convince. I think you're getting pleasure out of it. Anyway great work. Keep it up.👏
Yes i want every people, even the back benchers, to know the working exactly.. 😍
🙋♂️
bro really you are genius ...
No. 99% perspiration.... made me
വളരെ ഉപകാരം ചെയ്യുന്ന വീഡിയോകൾ പോസ്റ്റ് ചെയ്യുന്ന ഓട്ടോമൊബൈലിന് നന്ദി.
3 ഡിസ്ക് 4 ഡിസ്ക് ആക്കാം അല്ലെ.
അതെ ആകാം. Efficiency അത്രയും കൂടും.
Clutch plate life how long should change the clutch plate
നന്നായി മനസിലായി 👍 താങ്ക്സ് ഭായ് 🙏
Yande vandi kayatham kayarumbol pickup valare koravann 3rd gear ettit kararumbol racing avum but power kittunilla eth clutch problem ayirikumo
വണ്ടിയുടെ engine rpm കൂടുന്നുണ്ട് എന്നാൽ വണ്ടി കയറുന്നില്ല എന്നാണേൽ ക്ലച്ച് പ്രോബ്ലം ആണ്. അല്ലാതെ എൻജിനും വേഗം കുറയുന്നുണ്ട് എങ്കിൽ timing, tuning ഒക്കെ ആകാം പ്രശ്നം. (പ്രശ്നം പരിഹരിച്ചാൽ എങ്ങനെ എന്ന് പറയണേ)
Thanks clutch plate il first and second last plate fix cheyyunathil doubt undarnnu , now cleared first bulge plate outward M/C and second last towards m/c alle
അതെ അതെ ആദ്യത്തെ മുഴ വെളിയിലേക്കും രണ്ടാമത്തെത് അകത്തേക്കും
Hi
I changed the new clutch set , only the problem noticed it’s automatically loosened the clutch controls. Many times I adjust the cable and screw from gear side . After couple of kilometres there is no clutch control
Pls advice me
I have also noticed it sometimes. It may be because of the first phase adaption(seating) of the new plates. Slight wear of the plates leads to heavy play to lever due to the 'leverage' provided in the mechanism. You may please tight it without any play. And we may watch. Can you update the developments....? (Or go away after finding a solution 😃)
Ente vandiku 3 playit nu 4playit chainge chayan 4speed Total asambliy maranam enu mecaniku paranju angane veno?
അതെ അങ്ങനെ തന്നെ ആണ് വേണ്ടത്
Njan 4speed cluch change chaythu but vandi pulling kudi ttundu but cluch liver nalla taitundu piny nalla vibration kudi ethu rannig il shariyakumo?
@@avakbaraliഅത് പിന്നെ ശീലം ആകും. പിന്നെയും ബുദ്ധിമുട്ട് തോന്നിയാൽ clutch spring ഇടുമ്പോൾ ഒരു plate washer വെച്ച് ഇട്ടാൽ spring അത്രയ്ക്ക് tight ആവില്ല. അപ്പോൾ lever കുറച്ചുകൂടി free ആകും.
@@avakbarali vibration എന്താണെന്ന് അറിയില്ല.
@@avakbarali low speed ottikan pattundoo ??under 40 in 4th gear ??
96 മോഡൽ ബുള്ളറ്റിനെ 15 ടീത്ത് sprocket ഇടാൻ പറ്റുമോ
yes, I think.
2 months aayi ente 1990 model Bullet use cheydittilla.. ipo start cheydapo clutch work aakunnilla.. start cheydu clutch apply cheydu gear idumbo apo thanne vandi off aakunnu, as if no clutch applied.. also at engine off position, when I try to move the bike in gear position with clutch applied, it’s not moving.. what could be the reason and how to fix it? Appreciate your advice..
വലതു വശത്തു ഉള്ള clutch adjuster tight ചെയ്യണം... എന്നിട്ട് clutch പിടിച്ചു kick lever ചവിട്ടി clutch free ആക്കണം.
@@RKR1978 okay.. thank you.. fixed it.. many thanks for the response..
@@pranavsurendran7700 👍
Bullet Gearl ഇട്ട് സ്റ്റാർട്ടാക്കുവാൻ സാധിക്കുമോ? അത്യാവശ്യഘടത്തിൽ
ഞാനു ദേശിച്ചത് 2nd ൽ ഇറക്കത്തിലിട്ട് സ്റ്റാർട്ട് ചെയ്യാൻ സാധിക്കുമോ?
വളരെ എളുപ്പം പറ്റും. ആദ്യം gear ഇട്ടു വെയ്ക്കുക... പിന്നെ clutch പിടിച്ചു തള്ളി കുറച്ചു വേഗം ആകുമ്പോൾ decompression lever apply ചെയ്തു clutch വിട്ടു engine തിരിഞ്ഞ ശേഷം de- compressor വിടുക.. ഇതാണ് നല്ല procedure
Hello fellow rider.. my 1990 model standard Bullet makes sound like a spinning motor from the clutch assembly.. it was taken to a mechanic for inspection.. he adjusted the primary chain tension and also adequately adjusted the air gap between the rotor and stator.. but still the sound doesn’t go off after starting the engine.. any idea what could that be?
Over tight of primary chain. Please loose it a bit.
@@RKR1978 thanks for the response.. in fact the primary chain was a bit loose initially when I started to hear the noise.. then tension was adjusted accordingly by tightening as well as loosening again.. however the noise remain same unfortunately..
@@pranavsurendran7700 there are 2 reasons for the humming noice, first over tightness of the chain and second touching of magneto with the core. When the chain is loose, another aound was there like wobbling of the chain.
@@RKR1978 ok thanks.. i will get it checked once again.. I was just wondering if it causes due to worn out shaft bearing.. many thanks for your help..
@@pranavsurendran7700 you can check the chain tension by inserting the finger and just rotate the chain by pressing the kick lever. You should check the tension at every bit of rotation. (As the clutch bell as well as the crank sprocket may be eccentric)
For slow speed rides in 4th gear, which type you prefer 3 plate or 4. especially in high weighted crank models
Actually we can ride in slow speeds in 4 plate clutch models. Just use a thicker oil like 20-50. Or you can adjust the clutch lever play to 0. No need of 3 plate alternative for riding in such a manner.
@@RKR1978 Thanks bhai for the reply. Then what could be the reason for pick up drop when I converted from 3 plate to 4 model. sorry I'm just curious.
@@eldojoseph563 that may not happen. The 4 plate clutch reduce the chance of slipping... So definitely pickup will increase.
@@RKR1978 thanks again. 👍
hi. can you explain about clutch lever play to " 0 " . meaning no free play of clutch lever ? . i currently have a free play of 3 mm . i cannot ride below 40 kms in top gear without slipping the clutch. not sure whether previous owner upsized the front sprocket . i ride a 1985 CI model
Clutch azichu set chiytatinu shesham 1st, 2nd, 3rd gear edumpol entho oru friction sound varunnu. 4th gear il kuzhappam ella enthanu karanam ennu parayamo...
കുറെ നാളായി ഇതൊക്കെ അഴിച്ചിട്ടു... മറന്നു എല്ലാം
Ok😢
Tks for ur vedio
Same ellakki cheytu nokki oil nallla black ayi platil grees ayat pole oilil metalinte podi pole udd
Cluth nallaa smooth ayi
Oil alpamm kurajal kuzhapppamuddo
കുഴപ്പം ഉണ്ട്.
@@RKR1978 eth kuzhapppaman
Can u give ur mobile no
@@nasifnazeer1337 oil കുറഞ്ഞാൽ എന്താണ് കുഴപ്പം എന്ന് അറിയില്ലേ..?
@@nasifnazeer1337 mobile number എന്തിനാണ്.??
ഇതിലും simple ആയി ക്ലച്ച് അസംബ്ലി explain ചെയ്യാൻ പറ്റൂല...
Thanks. I want people to use all meaningfully. ☺️
Clutch install chaythathine Sasham engine chaine karagunnilla ? Anthayirikkum karanam....sir
ക്ഷമിക്കണം ഇപ്പോഴാ കണ്ടത്.
പ്രൈമറി ചെയിൻ കൂടുതൽ മുറുകി പോയതാവും കാരണം. അത് അയക്കണം എന്നാണ് തോന്നുന്നത്. ചെയിൻ slack അഡ്ജസ്റ്റ് ചെയ്യുമ്പോൾ ഏറ്റവും മുറുക്കം ഉള്ള സ്ഥലത്തു വെച്ച് കറക്കം നിർത്തി അഡ്ജസ്റ്റ് ചെയ്യണം.
(പ്രശ്നം പരിഹരിച്ചാൽ ഇവിടെ പറയണേ )
Awaiting more informative videos
Hloo sir gud information
Sir one doubt clutch rod nde ullil oru ball bearing oru long rod pne oru small rod alle ullath
Total 3 ennam alle rod |--- •- ----------
Yes total 3. Ball is for extending the length. We can use more than one ball... and can do with out ball .. if necessary
Thnk u sir
Sir kazhiyumenkil athinde video onnu cheyyo
@@sujies6583 i have already done clutch video
Brake light off akki veruthe idathe irikuka.ente vandyil a adjuster thirinju veenu enganayo stuck ayi .cluch coveril Vannu idichu barake kiittathe vannittund.nammal sredikathe irikunna oru side anu athu.
വളരെ ശരിയാണ്... പറഞ്ഞതിന് നന്ദി... ഇത്തരം പ്രശ്നങ്ങളിൽ വലിയ അപകടങ്ങൾ ഉണ്ടാവാറുണ്ട്
Is it the Same in Electra Model..Old model...2000 year...
I think so. But the dynamo may be different.
Cheta clach belinte spring bolt thred complete murukanamo
Yes yes. If the spring is so congested... you can use plate washers inside the bolt.
ക്ലച്ച് ബെൽ ബെയറിങ് മാറ്റി ബുഷ് ആക്കുന്ന ഒരു രീതി ഉണ്ടല്ലോ .. അതിനെപ്പറ്റി ഒരു വീഡിയോ ചെയ്യാമോ ? അതിന്റെ ഗുണം ?
അതിനെ പറ്റി അറിയില്ല 😪
എന്റെ ബുള്ളറ്റ്ന്റെ clutch ഇതുപോലെ ഷേക് ഉണ്ട്....... അതിന്റെ ലോക് സ്പ്രിംഗ് ഇടുന്ന ഇടത്ത് നല്ല ഗ്യാപ്പ് ഉണ്ട് അതുകൊണ്ട് ആണോ..?... Clutch പിടിക്കുമ്പോള് നല്ല shake ഉണ്ട്....
അതേ അതുകൊണ്ടാണ്...
@@RKR1978 ഇതിന് എന്താണ് solutions...?
@@syamlals4755 assembly മാറേണ്ടി വരും
Clutch plate 3 ill ninnum 4 aakiyal enthengilum advantage undo
Mileage, pickup etc koodum
Chetta old model bulletinte front drive sprocket teeth ennam etraya
16 (drive chain sprocket)
Clutch rod pad 3 platum 4 platum length difference undo.. Njan 3-4 convert cheythu but clutch set aavunilla please rply bro
ഉണ്ട്. വെത്യാസം ഉണ്ട്. Shaft ലും മാറ്റാം വരുത്തേണ്ടതുണ്ട് എന്നാണ് മനസിലാക്കുന്നത്.
@@RKR1978 thanks bro
Hi chetta ente vandi start cheyth idle irikumbol clutch boxnte avdunnu orayunna sabdam und clutch lever normal temporil nilikum but kurach kazhinj free play akunu oru solution parayamo? Pinne 3 plate clutch four plate akamo?akiyal gunam undo?
Primary chain കൂടുതൽ മുറുകിയാൽ ശബ്ദം വരാം, magneto core ൽ ഉരഞ്ഞാൽ വരാം. Cluch ബെൽ തകരാറിൽ ആയാലും വരാം.
Primary chain tightalla clutch bell marandivarum alle
@@praveenkumark.p8025 അറിയാവുന്ന mechanic നെ ഒന്ന് കാണിച്ചിട്ട് മതി
Ok cheta thanks
Njan vere oru video noki fit cheyydhu , the location of two metal plates and rubber type clutch plate was different, now I feel jerk at low rpm 😢
aano..? 😪
@@RKR1978 ee video kandittu pinneyum oori ready aaki , thank you 🙏 , clutch hub Ile rivet aaya plate maatano? The one which is there on the inside of the hub
No need of changing that riveted plates@@subhashs503
Last metal plate custom settings aano?? എൻ്റേത് ലാസ്റ്റ് metal plate flat ആണ് ☺️☺️☺️
Custom അല്ല
@@RKR1978 അപ്പോ എൻ്റേത് custom modified ആണ് 😁😁😁
@@Aryan_jith 😃😃👌👌
Bro oru doubt... Ente aduth pazhaya avl engine Thunderbird 2007 anu. Ningal ithil first um lastum ayit itta aa rand plate ille center bakam ullilot kuzhinjirkunnath. Ente vandiyil ath onne kananullu ullbakath ayitt.! Ath angane thanne ano atho miss ayathano?? Doubt 2 aa spring idunna 3kambi ille ath enteth loosanu ilakunnund ath angane thanne ano atho complaint ayathano??
ആദ്യത്തെ doubt - അതു miss ആയതല്ല. അങ്ങെനെ തന്നെ ആണ്. രണ്ടാമത്തെയും ചോദ്യം വെക്തമായില്ല.. loose ആയി അല്ല ഇരിക്കേണ്ടത്.. എന്ന് തോന്നുന്നു
@@RKR1978 ok thanks bro.. apo aa plate njan evide anu idendath.engine side lu ano atho last spring oke varunna side lo?
Both are same. I suggest it as the first plate.
@@RKR1978 ok really thanks bro😀
Pulling kuravanakil ella plates marano sir
വലിവ് കുറയുന്നതിനല്ല clutch plate മാറുന്നത്. Engine rise ചെയ്യുകയും ആ വേഗത്തിന് അനുസരിച്ചു wheel തിരിയാതെ power waste ആയി പോയി വലിവ് കുറയുന്നതിനാണ് clutch plate മാറേണ്ടത്.
ചേട്ടാ,3 to 4 th ഗിയയറിലോട്ട് മാറ്റി റൺ ചെയ്യുമ്പോൾ ആദ്യത്തെ കുറച്ചു സമയം (അതായത് 3 to 4 th shift cheythu ആദ്യസമയം )ഒരു പ്ലക് പ്ലക് ഇന്ന് ഒരു ചെറിയ ശബ്ദം ഉണ്ട് എന്തായിരിക്കാം കാരണം
അറിയുന്നില്ല
Primary chain loose anu athu poley.... Clutch plate mattarayi ennu enganey ariyan kazhiyum? Athu poley clutch side oil ethanu nallathu? Etra venam?
@@arunraj2215 oil ഒഴിക്കുന്ന nut അഴിച്ചു അതുവഴി വിരൽ ഇട്ടു chain tightness നോക്കാം. ആ സമയത്തു kick ലിവർചവിട്ടി compression ൽ വെച്ചാൽ ഉള്ള tightness ആണ് നോക്കേണ്ടത്. 1/2 inch ആണ് വേണ്ട slack. പലതവണ kick lever ചവിട്ടി കറക്കി നോക്കണം. എന്നാലേ ഏറ്റവും tight ആയ അവസ്ഥ എവിടെ ആണ് എന്ന് അറിയാൻ കഴിയൂ.(chain ഇടുന്ന sprocket പലപ്പോഴും eccentric ആയിരിക്കും). Oil 20-40 ഒക്കെ മതി. SAE 30 ആണ് കമ്പനി നിർദേശം... 420 ml വേണം.
@@RKR1978 thank you chetta..... Ethokkey nokki cheyyunna mechanics ney kandu pidikkanam.... Athanu ettavum pradhanam
👌👌👌👌👌👌
Good..oil qty ethrayanu ozhikendathu? Ethu oil?
Clutch ൽ 420ml oil ആണ് വേണ്ടത്. 20-40 oil മതിയാകും. 2.25 ലിറ്റർ ആണ് engine ൽ. Fully Synthetic oil 20W -50
Thank u...
Clutch disc complaint aanengil clutch pidikumbol oru sound kelkuo
Disk ആയിരിക്കില്ല പ്രശ്നം. Bell ആണ്.... അതിന്റെ rivet play ആയിരിക്കും കാരണം
4പ്ലേറ്റ്( 2008)ക്ലച്,3പ്ലേറ്റ് ആക്കണം,ആക്കുന്നതുകൊണ്ട് എന്തൊക്കെ ഗുണങ്ങൾ /ദോഷങ്ങൾ?
Clutch slip കൂടും.... Mileage കുറയും
Ente kayyil oru 1983 bullet und ath 3 plate ann ath 4 plate akkiyal enthann ubakaram
Clutch slip കുറയും.. mileage pickup കൂടും... wear and tear കുറയും etc
എന്റെ ബുള്ളറ്റ്റിന്റെ ക്ലച്ച് പിടിക്കുമ്പോൾ പ്ലേറ്റിന്റെ ഒരു ഭാഗം മാത്രം ചരിഞ്ഞു പ്രവർത്തിക്കുന്നു, എങ്ങിനെ സോൾവ് ചെയ്യാം?
Clutch bell ന്റെ അകത്തെ റിവറ്റ് പോയോ എന്ന് നോക്കൂ... മറ്റൊന്നും തോന്നുന്നില്ല
ചേട്ടാ ക്ലച്ച് മാറിയിട്ടും കിക്ക് ചെയുമ്പോൾ കിക്കർ ഫ്രീയായി പോവുന്നത് എന്തുകൊണ്ടാണ്
clutch cable over tight ..?
എന്റെ വണ്ടി 2003 ആണ് ഞാൻ 3plate clutch mari 4 aaki pakshe eppo clutch sidil nin payangara noise 3 പ്രാവശ്യം clutch reset ചെയ്തു പക്ഷേ സൗണ്ടിനെ ഒരു കോരവും എല്ലാ
Aano. I couldn’t know the exact reason
4 പ്ലേറ്റ് ക്ലച്ച് 3 ആക്കുന്നതിൽ എന്തെങ്കിലും പ്രശ്നം ഉണ്ടാകുമോ ?
ഇല്ല. എന്തിനാണ് അങ്ങനെ ആക്കുന്നത് എന്ന് അറിഞ്ഞാൽ കൊള്ളാം
സ്ലോ സ്പീഡിൽ പോകാൻ പറ്റുമെന്ന് ഒരു മെക്കാനിക്ക് പറഞ്ഞു
Best... !!!! സുഹൃത്തേ അതു ഇപ്പോഴും ആകാം... half clutch ൽ പോയാൽ മതി. മറ്റേതു clutch slip ആവുകയാണ്.
@@RKR1978 👍
3 plate cluch setting vedio please
@@bharthikanyakumari1996 sorry dear I left video making
Clutch boxil ninnu sound kekkunathum oil leak akkunathum enth kond ahnn
അഴിച്ചു നോക്കേണ്ടി വരും.
@@RKR1978 entho urayunath polle ulla sound kekkunatho
Rajesh eta pointnu oru rubber cap idunathu nallathyrkum
Yes yes
Marketil available ano rubber cap
@@rajen1437 athe chetta pazhaya ambassador carnte petrol tank cover cheyuan use cheyunathyrunu ithu enna njn kettitule
spare parts shopil available ayrkum
@@gokulvinod3265 atu valare useful anu, alel wash cheytal pani anu epolum
@@rajen1437 rainy seasonlum valare nallathanu
cost of clucth plates?
Less than 400 i think
എന്റെ വണ്ടിയുടെ കോയിൽ പെട്ടെന്ന് കത്തിപ്പോകുന്നു എന്തായിരിക്കും കാരണം
ഏത് coil? Ignition coil ആണോ..
3 plateum 4 plateum enth vithyasm ullath onn parayamo
4 plate is efficient. But 3 plate slips
@@RKR1978 ok
Very good
1st gearil uphill kerimbol clutch slipe akkununde
Clutch കേബിൾ tight ആണോ..? 🤔
Clutch slipping ne patti oru video idaamo
മടി ആണ് 🙏🙏😃
@@RKR1978 😄😄
Thanks
Sir ഈ 3പ്ലേറ്റ് 4പ്ലേറ്റ് ആകുന്നതിലൂടെ വണ്ടിയ്ക്കു എന്തൊക്കെ മാറ്റം ഉണ്ടാകും...
Clutch slip ആകില്ല.
Super sir
Clutch plate 3 ninnu 4aakumbo enthoke mattanm
അറിയില്ല. Gear box main shaft ൽ എന്തോ മാറ്റം വരുത്തണം എന്ന് തോന്നുന്നു
95model nn oke 4 plate use cheyyan pattumo ?
Natile workshpil 3k ahnu 4clutch iddan vendi avuna rate ? Ath kooduthal ahno
4plate use cheyumbo clutch bell marendi varumo?
സാധനങ്ങൾ കുറേ മാറേണ്ടിവരും പക്ഷേ 4-speed ആണ് കൂടുതൽ നല്ലത്. പക്ഷേ ഒരു വർഷം ഏകദേശം 5,000 കിലോമീറ്ററെങ്കിലും ഓട്ടം ഉള്ളവർക്ക് മാത്രമേ ഗുണം ഉള്ളൂ
@@RKR1978 OK
ക്ലച്ച് കൂടുകയും കുറയുകയും ചെയുന്നത് എന്താണ്
മനസിലായില്ല
ചില സമയങ്ങളിൽ ക്ലച്ച് ലിവർ ഫ്രീ ആയിരിക്കും വണ്ടി ഓടി 100മീറ്റർ കഴിഞ്ഞാൽ ക്ലച്ച് ലിവർ ഹാർഡ് ആകും പലതവണ ക്ലച്ച് അഴിച്ചു നോക്കി ഫോൾട് ഒന്നും കണ്ടില്ല ക്ലച്ച് road പൊട്ടിയോ അന്നും നോക്കി ഒരു കുഴപ്പവും ഇല്ല
@@anilkottoor ഒരു പിടിയും കിട്ടുന്നില്ല..
എനിക്കും
@@anilkottoor gear box cover ന് വല്ല kuzhappavum😃ഉണ്ടോ എന്ന് നോക്കൂ.. ആ കവറിൽ pressure ചെലുത്തിയാണ് clutch rod clutch നെ തള്ളുന്നത്. Gear box outer കവറിൽ ഉള്ള mechanism ഒന്ന് നോക്കൂ... അല്ലാതെ എന്തു പറയാൻ 😪😪
എന്റെ വണ്ടി engine restoration കഴിഞ്ഞ് 200 km ആകുന്നു .ഇപ്പോൾ cluch side ൽ നിന്നും Sound കേൾക്കുന്നു
എങ്ങനെ ഉള്ള ശബ്ദം
എന്തോ ഇളകി ഉരയുന്ന പോലെ ഉള്ള ശബ്ദം
അത് പ്രശ്നം ആണ്. അത്യാവശ്യമായി clutch side അഴിക്കണം. ഒന്നുകിൽ magnet ഉരയുന്നതാണ്... അല്ലെങ്ക്കിൽ clutch assembly പ്രശ്നം.
work shop വരെ ഓടിച്ചാൽ പ്രശ്നം ഉണ്ടോ .ശബ്ദം നന്നായിട്ട് കേൾക്കുന്നുണ്ട്
@@jayeshkg648 എത്ര km.?
Electronic aa ellae
മനസിലായില്ല. ഒന്ന് വ്യക്തമാക്കാമോ..?
@@RKR1978 aa videoil kanda bullet cb pointallalo electronic allae
@@sheringeorgethomas2078 അല്ല
@@RKR1978 mumbathae oru videoyil oru cb point illatha Bullet kanichu atha njan chodichae
@@sheringeorgethomas2078 ok. പക്ഷെ എന്റെ വണ്ടി CB point ഉള്ളതാണ്
What benefit us....in changing 3 plates into 4 plate???
In 3 plated some unwanted slip happens, hence loss of output power.
Clutch chude akumbol slip akkumo
അങ്ങനെ കണ്ടിട്ടില്ല
its wrong
Please point out it 🙏
first friction plate bulge cheytha bagam frontil akki anu idandethu ithil flat plate anu first idunnathu
@@deepakp6473 ok