I'm one who loves viewing dams and structures built to control waterways for our benefit. If I see a sign along the road that says "dam", I immediately turn off and investigate. This information will help me further bore my friends. Thank you for that.
Found this really interesting. The weir in Galway, my hometown, creates a pretty unique cityscape. I have always been fascinated by it, but never really put much thought into it why it existed.
Glad you're here Brian because I have a question that could interest both you and Grady. Just before introducing the labyrinth weir, Grady introduced the question of "how do you control the flow rate without the ability to increase structure length' (excuse the paraphrase), and my initial thought was "make it a V." To clarify, in my mind, I meant vertically introduce a slope across the length of weir where the lowest point would be at the center of the structure, and the highest points on the banks, not the types of "v's" mentioned in the video. I ask both of you: any validity to that idea? As I sit and think on it more, I realize that it would most likely cause more water level fluctuation than a standard flat weir, but maybe there might be some form of benefit to that design. I don't know. Also, any chance you're doing a meet-and-greet any time soon, Brian? I'm in the UK for the semester (planning on seeing family in Ireland), and It'd be awesome to get to meet and chat a bit. Looking forward to new videos from you both! Thanks for the read!
SkoobySkeptic Indians used weirs on beaches to catch fish,,,kinda like a Corel,,the tide would come up along with fish,fish would swim into the corral,,then when the tide went out,the fish where caught,,there’s one in Rye NH
Most people have no idea how much of their surroundings are engineered, but at the same time, look quite natural. For example, some trees on the side of the road probably don't mean much to most people but they may be a part of a complex hydraulic system.
Your videos should be shown in all schools to inspire young minds. I am a 69 year old retiree and I'm a perfect example of a why videos like yours are important! When I was in school I hated math and I was a mediocre student overall. I always say if that math could have been presented in a way that was interesting to me then I would have excelled in my studies. I did ok during my career, although when I look back at my life I would have enjoyed being a mechanical engineer because I have a natural inclination for it. If I had only known what was possible when I was a teenager in high school I would have taken a very different path!
That's because TH-cam is studying you. Have you ever seen a survey where they ask you if you liked a certain video? That and they recommend based on what content you have watched and which websites you visit.
You're the real ogee of engineering channels on TH-cam. You provide valuable inflow on many different topics and although this video is a little bit weir, I still find it quite interesting.
In Canada, among paddlers, weirs are also called "drowning machines." If you go over a weir, the fluid dynamics will often pin you to the floor of the river and won't let you up for a very long time.
Doesn't necessarily pin you to the floor, but rather gets you stuck in a re-circulation zone where every time you float back to the surface, the negative velocities pull you back to the weir and launch you under again. I made a Lego-man demo for my hydraulics students at university: instagram.com/p/Be1RskCHphySYvOdVjIZLipOUQ9IBwEIkIyxAI0/
Weirs have also been used, historically, for fishing. Some of the oldest weirs were built in a triangular fashion almost exactly as shown towards the end of this video, made of rocks placed across shallow rivers. This allowed water to flow over while trapping fish, behind, which could then easily be caught. There are some pretty obvious downsides to this approach - namely that it almost completely stops the ability of fish to move along the river's course - but old, historical examples can still be found, at least in pieces, in small rivers and streams.
At the Etowah Indian Mounds, they still have such a structure in the river, and the engineering behind it is genius. They would essentially bottleneck fish into "breaks" in the weir large enough to fit a basket into, then scoop one up and it would be filled with fish
Still commonly used in the southeast in smaller rivers specifically for eel weirs and they actually have (very few) licensed weirs because its been a generational method of eel fishing for some of those families
You forgot those where the height is not the same at every spot, often combined with triangle or rectangular shapes. The higher the water gets, the more length it has to discharge.
My first thought was this. Pyramid shapes allow less water to pass when low water level but should increase the flow when water level get higher. Well, in laymans mind at least...
My first thought was having some sort of stair step design, where the rare high waters/flooding scenario would basically bypass a lower weir by design.
These would lead to a higher water level in all cases, so it doesn't really do anything to help solve the problem in the video. They do potentially allow for reduced wear and tear on the dry side but that is about it
@@NotedDesperado I was hoping for some discussion of V notch weirs- a friend who worked for the water board bored us all senseless on a hike to a reservoir pointing out V notches, "the only type of weir with consistent cross section geometry for any water level"
As a retired EE, enjoy your engineering videos. Here in New England many flow control structures use a low tech flow control method, flash boards. Wooden board are mounted at the top of the structure to increase static water level. In a high flow situation the boards break away. Crude but effective for small structures. To your other point New England is littered with small dams used for water power in the 18th and 19th century. Many have been breached to improve aquatic conditions and fish migration. We had a lengthy discussion about breaching a couple in our town several years ago. Ultimately decided not to remove them as the impounded water is integral part of town. The other concern is release of contaminants held in sediment behind the dam, luckily in or case that proved not to be a severe problem. Love your enthusiasm for engineering hope you have a long and successful career.
In old-world window manufacture of double-hung windows they use something called a "Roman Ogee" to stop the top window from coming all the way down. Interestingly, they look remarkably similar in shape to the ogee featured in this video. Makes me believe there's a correlation.
@Mike Spencer i think we'd be more proficient in the english language if we all study latin.. even most of the elements in the periodic table have a latin name and meaning of origin
@aboctok don't worry, it's just Orkish slowly taking over. So long as you say that you need more dakka, you'll always be alright (an if ya needz ta hide, just pain yaself purple).
During the video you say, "Flatten the curve." I can't help but think that's why you just now showed up when I've been watching corona virus videos. The algorithm listens!
@@threadie technically now yesterday although I made that comment after midnight which is technically today but I referred to yesterday as today when it was really yesterday. You understand don't you?
In the UK weirs were also installed to help clean up rivers. IE to introduce oxygen and remove carbon dioxide from the water in order for aerobic bacteria to get rid of (metabolise) certain classes of pollutants.
In my hometown of Columbus, OH, we actually removed a series of low head dams and weirs from the Olentangy River in order to improve river health. It also lowered the river level, and they build a really pretty park smack in the middle of the city center.
I once lived by a weir on the river Aire. It always surprised me that the smell around it was a'kin to stale washing machine water. You could define hints of laundry detergent along with a few hundred years of washing wool fleeces and a hint of iron.
@@gordonlawrence4749 Thinking about it a bit more, the weir was to provide head for a mill related to the Saltaire area. Named Hirst Mill and Hirst Weir, there is a link to a picture i found here. www.geograph.org.uk/photo/1340593
here in Czechia, word for weir is more common than word for water fall or dam, I guess it's because there are weird everywhere and most of Czechs are canoing or rafting at least once in few years
I have a creek in my back yard with trees fallen over into it and i can say yes it does act similarly however it does cause some issues when they rot and move with the water
The extent of my knowledge of a weir until now was that it's a kind of dam, with double question marks at the end of that line. This was really interesting to watch.
Grady speaks so well and explains so concisely and with brevity. He's able to find the perfect balance and give just the right amount of info without overwhelming the viewers, and make learning so engaging at the same time. Just wow, gj dude.
You should definitely do a video on the dangers of these structures. I learned early in life (age 14) of the danger of these structures when a neighborhood kid died falling off of one while trying to walk across.
We put together a video with our local Fire & Rescue Service using a 'water safety flume' specifically designed to show the dangers of weirs and other structures in rivers - you can check it out here: th-cam.com/video/UOREcFHPEiQ/w-d-xo.html
We have a weir on the river in our town (in the UK) which had a large positive economic impact. It was built to increase water level for what was an inland port back in the 19th century. It helped as bigger boats could come up the river from the sea and it also allowed a canal to join the river without very large locks. The only downside was the river had to be continuously dredged as sediment got stuck behind the weir. Sadly our town no longer has the port which hit it very hard economically, but the river has reverted to a wild river, shallow and full of fish.
I'm not involved with civil engineering, but I am desperate to learn about it because I find it fascinating. I hate not knowing how the "stuff around me" works.
@@dialecticalmonist3405 that kind of enthusiasm and curiosity is sadly what many civil engineering students lack. A lot of students worry mostly about getting passing grades, and while some worry about actually learning the subject matter, only few bother to see and analyse the practical applications of the program. Kinda sad tbh, and I've been guilty of this, too, in the past
@@stedeestelle2866 That's sad. Because this is the stuff that makes an "economy" an economy. It makes a society a society. It makes an empire an empire. Every theoretical discovery in science, was created to ultimately improve the infrastructure of society, and just as often, pure intuitions from the necessity of infrastructure informed theoretical discovery. It's like the glue between the mental and the physical.
@@stedeestelle2866 true, I was guilty with it to. Especially early on when all of our subjects were just maths, physics and other non related stuff. It got interesting when we had designs subjects though.
There are too many comments to search through to see if it's mentioned, but water treatment plants also have weirs for sedimentation basins. As fair as I've seen, they are fixed and set to keep the water basin at the same height all year.
I like that he introduces the sponsor, but saves it for later so we can learn first. Meanwhile every other channel on youtube demands likes, a subscription, and the nOtIfIcAtIoN bElL, then they throw a two minute long advertisement for their sponsor in before the actual video even starts, then they beat around the bush to stretch it to 11 minutes for that ad revenue, and they STILL demand that you throw money at them on Patreon. This guy kicks ass, glad to be a new subscriber
this is probably the first video of this channel i came across but the production quality is so good i might stick around. i like the way he talks, it's easy to follow and clear to understand. but i had to stop the video at around 3:11 because that's where i realized: the white background is actually a textured wall. that means even tho the graphic is made digitally, the background wasn't left completely white. now this indicates to me, that they decided that a completely blank white background would be maybe too boring or too bright on the eyes, but whichever reason, small details like that always amaze me on youtube. because it just makes me appreciate the effort that goes into some videos even more! so keep up the great quality!
There is an insane amount of work that goes into seemingly simple youtube videos, i learn more and more all the time like you and it makes me appreciate the effort these guys goto
The dam by my place very recently received upgrades, one of which was a passive folded weir for overflow.... it’s nice to know technical terms. Thank you for the videos!
Came across a piano key weir without knowing what it was and thought it was absolutely fascinating. The water wasn't flowing over, so we were able to climb to the bottom. The vertical walls were probably close to 20 feet high! Cool to finally know what it was
@The Insufferable Tool on a road called 'tail of the dragon'. It's a popular driving road in TN and NC and the weir is on the Maryville TN side. It is not in the super curvy part of the road. I think the road is US 129 but not 100% on that
I haven't seen any fancy wier , just the Normal ones that are basically a slope I live close to rivers and there was a weir like that like very far into the forest , the area felt private closed from all the tall trees and the weir looked like a nice couch I just decided to sit down on a hot summer day and enjoy all the water slowly following over on top of me , it was great unfortunately that forest got ruined cuz someone got the land and built like a huge caffee place , and it's very annoying cuz I can't play in my river now with there always being people who can easily look down . how annoying I'll miss my private river spot was fun while it lasted
@@vedvids9319 Yeah okay, if you think transcribing every video to look for current phrases is an easier explanation than the fact that you've clicked on this or similar channel before.
In Calgary we replaced a traditional weir (Harvie Passage) that is used for water diversion (and is attributed to deaths every year or so). The new system makes it navigable for people and wildlife. It might make an interesting addition to your next project. I love your videos. They are excellently crafted and well thought out. Thank you very much for this.
The photo of the Hoover Dam at 4:09 shows a high water level overflowing into the spillway. It must have been taken more than 20 years ago. The water level is so low now that there is about 100 to 150 feet of the intake towers are exposed.
Now you've got me wondering what the flow into the dam is like. I visited recently and the water is significantly lower than the towers or overflow weirs, but there's other places that the water flows out during 'normal' usage, so there would probably need to be significant watershed upstream or perhaps oncoming drought where they want to store that much.
@MrCloudseeker ... the bypass tubes were used during the original construction so they had a dry area to build the dam. The original tubes have not been used since then. Most likely there are more tubes within the dam itself but I have never seen any reference to them. Perhaps they are there to flush silt from the bottom? Who knows?
Great to see a photo of the Burdekin Dam at 2:51. I live downstream of that dam and use it's water on our farms. A few weeks ago we had a large flood here and the dam was 6m over, equating to approximately 16000m^3 of water every second!! Pretty cool to see an Australian dam on a TH-cam video, Thanks :)
Weirs can also be used in the steel making process to help control the flow of molten steel. They are pre cast from a high temp cement called refractory. I surmise weirs can be utilized in many instances for greater control of a liquid.
I’m gonna build one. This is what I needed to know. I was gonna just do a normal wall but now it’s gonna be like that triangle shape and help with the flow to not cause damage
"Thank you for watching, and lemme know what you think." ... You know what I think, sir? This is the best channel I'm subscribed to on TH-cam. Thank you for your hard work, and for making engineering so interesting. All the best.
Interesting. I used to weld and fabricate for a company called Rodney Hunt, who was bought out by Fontain gates and valves. Anyways we used to make those huge gates and valves so big you could literally drive a small car through them. Also did some work in the Hydraulics Dept which was cool to build those units that lift and turn those gates and valves. EXTREMELY high pressure passing through those units. Cool video.
@@_JayRamsey_ yeah it's a great company and pays well too. Great product made from the scrap metal to finished product in the USA. I started off in the foundry and worked my way up. I was able to see the entire process from start to finish. Cool stuff if that's what ur in to. I moved to Mexico from Massachusetts, and I'm driving truck now. But cool stuff.
4:19 Props to the Valve - Half Life 2 developers. I didn't realize that after I beat the hunter helicopter in Water Hazard and opened the gates I jumped over a weir. Solid.
I’m from Texas and growing up I remember swimming in a natural pool of some sort near Georgetown or Austin that had a weir. Also in parts of Arkansas as well, there was a spring that discharged super cold water that they built a weir. Best swimming pools when it’s 100+ out.
I've wondered for years why the weirs on the River Wear (yes, confusing) in Durham (UK, not US) are set diagonally across the river -- in one case, curving until it's almost parallel to the bank. I figured there must be some rationale -- why go to the extra hassle and cost if there's no benefit -- but the length term in that equation makes it all make sense!
I used to work in a Sewage Treatment plant, many of the tanks used to process the water contained weirs. For example, in a round Thickener tank, waste water would be pumped in from the top center of the round pool shaped tank. The heavier waste sludge would sink to the bottom, which instead of being flat like a pool was cone shaped. It was pumped off into a what's called a digester tank to be further processed. The grease would float to the top where a rotating skimmer arm would push it into a box to be collected and pumped away. The now clearer, cleaner water would flow up and over the weirs at the outside circumference of the tank to move on to the next process. We used a formula to calculate the amount of water flowing out over the weirs per hour and the pumping rates of the various pumps letting water into and out of the tanks.
Great summary, much enjoyed. Another long-used method of improving flow was to place the weir at a slant or curve in the channel. The most beautiful example is the weir below the Pulteney Bridge on the River Avon in Bath, England.
That was really interesting and done in a professional way. I honestly thought this dude was a professor or civil engineer. Thumbs way up for nailing it
Yeah, I don’t know why we didn’t have a series like yours when I was in elementary school. When I was in school, the big issue was that girls weren’t interested in engineering, but I think explaining engineering that *everyone* sees in their daily lives should at least get kids *appreciating* engineering. Keep up the good work.
I've seen many of these structures and even played around on them, but I hadn't ever really thought about their purpose, even though I have always had an interest in engineering (and in just about everything else, to be honest!). The vid took my attention straight away with the clear intro, and kept it throughout. The presentation was nicely modulated, smooth and professional. Well done. Recommended.
Grady, to gain a variable flow control, could you use the horizontal angle of a folder weir? If the point of the folded weir was say 5 degrees higher than the outer sides, a slow flowing river would only flow over the lowest parts of the crest. As the flow increased, more of the weir's crest is used by the water, This would effectively self regulate the weir's geometry.
Interesting thought. There probably is a reason why it isn't done. Or it actually is done. Otherwise you might just have made a possibly great invention.
Such structures exist and they're called compound weirs. These structures come in various cross-section geometries which can be tailored to provide better control of water levels under various discharge rates. The structures discussed with a fixed crest height, also have a fixed relationship between the upstream water level and discharge capacity.
I wanted to add another use for a weir. Years ago I worked for a municipality and we wanted to check an output of a local spring. We installed a weir so we could measure the output
Nobody: "Well my friend, I was a little concerned about how we were going to manage the upstream water level, but after watching this video I think weir gonna be OK."
Weirs are also used for measuring flow rate as well as controlling water level as the equation allows the flow rate to be calculated for various heights above the weir crest which can be monitored by various methods such as electronic sensors that take data and convert the depth to flow rates. As an engineer have installed many weirs in my time. Very useful devices for sure
You are really good at speaking in front of a camera. The tone of your voice wanders naturally thru a sentence, you don't pepper with uh's and um's, and you explain things very clearly.
Speaking of your writing, I was watching this one and thinking about how your exposition and subject matter is so timeless that an engineer from 1900 could watch and probably relate, and learn a lot. Then you said "24/7", and that would probably stop such a viewer in his tracks.
I used to live in a city that had a variable weir with a rubber membrane, managed with what I can only assume was air pressure. Always found it super interesting.
Not sure if its technically a weir as there's no control mechanism, but a river near me had a weir/waterfall/dam installed like 60 years ago to help aerate the water and take away the awful smell it was putting out.
Thanks, Cadwaladr, I looked it up. Interesting problem: how to remove debris that clogs up the labyrinth weir. Did they ever solve that? First thought was to add hinges in order to occasionally reconfigure into a huge chevron in order to let the debris float to the banks. Just a thought.
I love your channel man, I work in civil construction (excavator operator) and I wish the engineers on our sites were half as interesting as you😂 thank you for what you do, please keep doing it and I cant wait for the next video
I sought out basic info on weirs because of my interest in fabricating a basic "first flush" add-on for a rain barrel assembly. Said add-on would include some sort of weired (is that a word?) baffle within a 5-gallon bucket. This came to me as I reflected on sewerage districts use of weirs in their primary clarifiers. Flow direction would be reversed for my first flush design, as compared to a clarifier. Rain input would be from above, outlet would be through a center riser in the bucket...with a screen. Thanks for the nice video.
I searched google for weirs about two weeks ago and now this. first time I've heard of weirs two weeks ago and now google is sending me these things. It's just kinda creepy how much they can know about a person.
me too but I'm quite glad i discovered this video. As a student of electrical engineering I have some technical background but I don't know much (or sometimes anything) about construction, hydraulics and buildings, and also I dont know as much about mechanical engineering as I want to. So im glad TH-cam showed me this video and your channel, it gives a good, well-founded overview of such topics that help you understand why these pieces of engineering are useful, how they work etc. and if you want to know more you know what do search for.
You defined what an ogee is. As a carpenter I respect you sir. An ogee is a profile in mill work. And it matches the water fall profile. I guess it could be applied to light as well, as the flow of light over that gradient has high lights and deep shadows. A step curve. Very cool.
There's a joke in "Keeping Up Appearances" where the main character Hyacinth Bucket (pronounced _Bouquet_) demands that a lock-keeper open the water way, to which he replies "You could try going over the weir." lol I never knew what a weir was until now.
As a child my uncle always made sure to tell me over and over again how dangerous weirs are since he knew a group of people who died in one, and it scared me so much that to this day I get an uneasy feeling if I see one, so I am trying to edcuate myself to fight the fear xD
The Potomac River, near Washington DC, has a low weir called “Little Falls dam’. It is well known as a “drowning machine“. I wonder if they changed it to a folded weir, if it would change the dynamics and make it safer??
yes, i think so. folded weirs dont have a stong, consistent flow immediately down the weir. at last, the ones i've seen. which arent deep. that doesnt mean the water doesnt accelerate soon after... like they say, il faut se méfier de l'eau qui dort.
Robert Hall Weir is an American musician and songwriter best known as a founding member of the rock band Grateful Dead. After the Grateful Dead disbanded in 1995, Weir performed with The Other Ones, later known as The Dead, together with other former members of the Grateful Dead.
I'm one who loves viewing dams and structures built to control waterways for our benefit. If I see a sign along the road that says "dam", I immediately turn off and investigate. This information will help me further bore my friends. Thank you for that.
damn.
Damn
blipco5 I like to go on google earth and follow random rivers to see what dams are along it.
Oh dam
You are a person after my heart 😀
Found this really interesting. The weir in Galway, my hometown, creates a pretty unique cityscape. I have always been fascinated by it, but never really put much thought into it why it existed.
oh i love you both
Depending on the wildlife, weirs can be hazardous. Usually to wolves in the moonlight.
Both of these channels are my favorites. Sucks that this one posts once in a millenia but still good😀
So that's why they called it the salmon weir bridge. I always wondered where it got it's name from but never put 2 and 2 together. Thank you!
Glad you're here Brian because I have a question that could interest both you and Grady. Just before introducing the labyrinth weir, Grady introduced the question of "how do you control the flow rate without the ability to increase structure length' (excuse the paraphrase), and my initial thought was "make it a V." To clarify, in my mind, I meant vertically introduce a slope across the length of weir where the lowest point would be at the center of the structure, and the highest points on the banks, not the types of "v's" mentioned in the video. I ask both of you: any validity to that idea? As I sit and think on it more, I realize that it would most likely cause more water level fluctuation than a standard flat weir, but maybe there might be some form of benefit to that design. I don't know.
Also, any chance you're doing a meet-and-greet any time soon, Brian? I'm in the UK for the semester (planning on seeing family in Ireland), and It'd be awesome to get to meet and chat a bit.
Looking forward to new videos from you both! Thanks for the read!
If a pier is an artificial outcropping over water for people, then it makes sense that a weir is an artificial outcropping over water for water!
mind-blown
Kyle Mouttet Cambridge called bruh, they wanna know if you prefer on campus or off campus living.
Ba-dumn-tssss
Deep
how _wierd_ ...
*so the river just got "weir'd"?*
So that’s where Weird Water comes from! 😂
Hmm that's weird
Great pun, dam!
TH-cam: Ever wondered about Weirs
Me: Nope "click"
And yet i watched it all, great vid.
Seabastard same here.
Me: ever wondered when to use an apostrophe?
@@farticlesofconflatulation Me: Nope "click"
lmaoo me too XD
That apostrophe doesn’t belong there. I swear on yo mama’s
Me the next time I see a weir:
"It's actually called a weir."
Be prepare to have ur ass whipd after that.😘
How weird.
Dam really?
theres an ogee underneath it too
Weir flex, but okay.
I had no interest in weirs but clicked on this all the same. Turns out I found your description and examples very interesting. Bravo sir.
SkoobySkeptic Indians used weirs on beaches to catch fish,,,kinda like a Corel,,the tide would come up along with fish,fish would swim into the corral,,then when the tide went out,the fish where caught,,there’s one in Rye NH
What? No inane insults? Bravo, sir!
What does 'bravo' means sir?
The amazing photo got me XD
So it’s grammatically correct to say that all rivers get “weird” after a weir is built.
🤣🤣🤣
whats a weird river?
@@moihawk666 its a play on words. Put the letter d on the end of weir and you get the word weird.
@@moihawk666 its a play on words. Put the letter d on the end of weir and you get the word weird.
“Weired”
3:10 "So how we can flatten this curve?"
Flattening curves before it was cool.
ikr, everyone a copycat
Remove the weir.
Curves flatten after ladies age!!!!
Just proves that even the simplest looking objects, turn out to be complex after investigating.
Most people have no idea how much of their surroundings are engineered, but at the same time, look quite natural. For example, some trees on the side of the road probably don't mean much to most people but they may be a part of a complex hydraulic system.
As soon as I heard "Co-Efficient" I realised into something much bigger than I thought!
Exact point of the cybertruck.
Hello
Contact no
Everything is interesting, if you go into it deeply enough.
~ Feynman
George Washington Carver knew something about that.🙄
We are lucky to live in an age in which we are still making discoveries.
Richard Feynmann
Like a Virgina ~me
It's all fun and games until you find a balrog.
He was also rather fond of going into female genitalia in some depth. Sometimes his friends wife's genitalia. He was just curious like that.
Your videos should be shown in all schools to inspire young minds. I am a 69 year old retiree and I'm a perfect example of a why videos like yours are important! When I was in school I hated math and I was a mediocre student overall. I always say if that math could have been presented in a way that was interesting to me then I would have excelled in my studies. I did ok during my career, although when I look back at my life I would have enjoyed being a mechanical engineer because I have a natural inclination for it. If I had only known what was possible when I was a teenager in high school I would have taken a very different path!
Nice.
Math in high school was so "abstract" I feel like you about it. Could not see it's purpose.
You know, when I was in collage, there were several Grandmothers going to classes as well. You are never too old to learn something new.
youtube randomly recommends this video and I find it interesting.
TH-cam is good at what it does.
Yup
Same
Same here. When I was young I have a book on dams , orifice and weir. But I never bother reading it.
That's because TH-cam is studying you. Have you ever seen a survey where they ask you if you liked a certain video? That and they recommend based on what content you have watched and which websites you visit.
You're the real ogee of engineering channels on TH-cam. You provide valuable inflow on many different topics and although this video is a little bit weir, I still find it quite interesting.
"the real ogee" Let's hear it for the attractive double "S" shape!
@@Lucidbkeo That was another pun. He uses the term "ogee" as a technical designation in this video.
@@Lucidbkeo Many thanks. I take my job very seriously!
"Youre the real ogee" I saw what you did there 👍
@@Lucidbkeo "head" niiice
In Canada, among paddlers, weirs are also called "drowning machines." If you go over a weir, the fluid dynamics will often pin you to the floor of the river and won't let you up for a very long time.
that's awful
should be called "drowning structures"
@@Timsturbs, please enjoy this high-quality Canadiana. th-cam.com/video/IQTHVpEeUAM/w-d-xo.html
Doesn't necessarily pin you to the floor, but rather gets you stuck in a re-circulation zone where every time you float back to the surface, the negative velocities pull you back to the weir and launch you under again.
I made a Lego-man demo for my hydraulics students at university: instagram.com/p/Be1RskCHphySYvOdVjIZLipOUQ9IBwEIkIyxAI0/
@@SulfuricDonut cool
Gotta try my new body board out
its like an endless wave then hehehee
Reminds me of the Elbow in Calgary.
Weirs have also been used, historically, for fishing. Some of the oldest weirs were built in a triangular fashion almost exactly as shown towards the end of this video, made of rocks placed across shallow rivers. This allowed water to flow over while trapping fish, behind, which could then easily be caught. There are some pretty obvious downsides to this approach - namely that it almost completely stops the ability of fish to move along the river's course - but old, historical examples can still be found, at least in pieces, in small rivers and streams.
At the Etowah Indian Mounds, they still have such a structure in the river, and the engineering behind it is genius. They would essentially bottleneck fish into "breaks" in the weir large enough to fit a basket into, then scoop one up and it would be filled with fish
Still commonly used in the southeast in smaller rivers specifically for eel weirs and they actually have (very few) licensed weirs because its been a generational method of eel fishing for some of those families
Not only historically, but prehistorically as well (going back thousands of years).
You forgot those where the height is not the same at every spot, often combined with triangle or rectangular shapes. The higher the water gets, the more length it has to discharge.
My first thought was this. Pyramid shapes allow less water to pass when low water level but should increase the flow when water level get higher. Well, in laymans mind at least...
My first thought was having some sort of stair step design, where the rare high waters/flooding scenario would basically bypass a lower weir by design.
These would lead to a higher water level in all cases, so it doesn't really do anything to help solve the problem in the video. They do potentially allow for reduced wear and tear on the dry side but that is about it
V notch weirs are the most common. The higher the water level, the more flow is allowed to pass at it climbs up the "V"
@@NotedDesperado I was hoping for some discussion of V notch weirs- a friend who worked for the water board bored us all senseless on a hike to a reservoir pointing out V notches, "the only type of weir with consistent cross section geometry for any water level"
As a retired EE, enjoy your engineering videos. Here in New England many flow control structures use a low tech flow control method, flash boards. Wooden board are mounted at the top of the structure to increase static water level. In a high flow situation the boards break away. Crude but effective for small structures.
To your other point New England is littered with small dams used for water power in the 18th and 19th century. Many have been breached to improve aquatic conditions and fish migration. We had a lengthy discussion about breaching a couple in our town several years ago. Ultimately decided not to remove them as the impounded water is integral part of town. The other concern is release of contaminants held in sediment behind the dam, luckily in or case that proved not to be a severe problem.
Love your enthusiasm for engineering hope you have a long and successful career.
Weir, ogee, nappe-- so many great scrabble words!
In old-world window manufacture of double-hung windows they use something called a "Roman Ogee" to stop the top window from coming all the way down. Interestingly, they look remarkably similar in shape to the ogee featured in this video. Makes me believe there's a correlation.
@@JohnBorgen looks like the word Ogee broadly means Sigmoid curve, which must be why its found in both design and engineering
@Mike Spencer i think we'd be more proficient in the english language if we all study latin.. even most of the elements in the periodic table have a latin name and meaning of origin
@@pihermoso11 My knowledge and understanding of the English language was greatly enhanced by studying and learning Latin.
@aboctok don't worry, it's just Orkish slowly taking over. So long as you say that you need more dakka, you'll always be alright (an if ya needz ta hide, just pain yaself purple).
My small town just replaced a dam and now I know why the new spillway is such a strange shape.. It's a labyrinth weir! Thank you 🙂
During the video you say, "Flatten the curve." I can't help but think that's why you just now showed up when I've been watching corona virus videos. The algorithm listens!
I thought the same!! Haha.
Google is always listening 👁
Way to go, you probably just demonetized the poor guy.
@@SnootchieBootchies27 considering I made this comment 3 weeks ago and all of the responses are from today, I think he's doing alright
@@threadie technically now yesterday although I made that comment after midnight which is technically today but I referred to yesterday as today when it was really yesterday. You understand don't you?
In the UK weirs were also installed to help clean up rivers. IE to introduce oxygen and remove carbon dioxide from the water in order for aerobic bacteria to get rid of (metabolise) certain classes of pollutants.
In my hometown of Columbus, OH, we actually removed a series of low head dams and weirs from the Olentangy River in order to improve river health. It also lowered the river level, and they build a really pretty park smack in the middle of the city center.
@@dcviper985 It depends on the specific issues.
I once lived by a weir on the river Aire. It always surprised me that the smell around it was a'kin to stale washing machine water. You could define hints of laundry detergent along with a few hundred years of washing wool fleeces and a hint of iron.
@@Godshole It would have been worse without as it would have got stagnant like the Thames was and several other rivers.
@@gordonlawrence4749 Thinking about it a bit more, the weir was to provide head for a mill related to the Saltaire area. Named Hirst Mill and Hirst Weir, there is a link to a picture i found here.
www.geograph.org.uk/photo/1340593
Mom : Son look a mini water fall
Son : Actually, its called Wier
Dad: How *WIERd!*
Random homeless guy nearby: *wheeze*
Actually it’s called a *weir*
here in Czechia, word for weir is more common than word for water fall or dam, I guess it's because there are weird everywhere and most of Czechs are canoing or rafting at least once in few years
@@Pidalin I agree. That's weird.
‘When a tree falls in the river, does it make a weir?” lol
If you're a kayaker, it makes a "strainer"! 😲
Damn.
Possibly….if it falls ACROSS a river 🤔
Honestly, that's a "weird" question..
I have a creek in my back yard with trees fallen over into it and i can say yes it does act similarly however it does cause some issues when they rot and move with the water
The extent of my knowledge of a weir until now was that it's a kind of dam, with double question marks at the end of that line.
This was really interesting to watch.
Grady speaks so well and explains so concisely and with brevity. He's able to find the perfect balance and give just the right amount of info without overwhelming the viewers, and make learning so engaging at the same time. Just wow, gj dude.
TH-cam: _hey you goin' to sleep?_
Me: yes, now shut up
TH-cam: *_What is Weirs_*
Me: **wakes up**
You should definitely do a video on the dangers of these structures. I learned early in life (age 14) of the danger of these structures when a neighborhood kid died falling off of one while trying to walk across.
I have. Search for the “most dangerous dams”
we might need something that blocks passage over a weir.
@@Gsoda35 already have it. Its called common sense.
@@asluckdespairs That works just fine because young kids always use common sense, right?
We put together a video with our local Fire & Rescue Service using a 'water safety flume' specifically designed to show the dangers of weirs and other structures in rivers - you can check it out here: th-cam.com/video/UOREcFHPEiQ/w-d-xo.html
6:06 Piano Key Weirs look like something The Empire would build. it has a very "deathstar" aesthetic.
Totally agree with you!
British Empire or Galactic Empire?
@@nicholasmcgregor6974 galactic empire
Or like Hyperion, from borderlands, for that matter.
I came for the piano key weirs and wasn’t disappointed.
We can use a fractal wier to fit an infinite length of wier into a finite width of river. Problem solved! (Consider a spherical cow in a vacuum...)
Michael Onines, The Spherical Cow the holy grail of cattle breading endless steaks.
yea but then you have a problem, fractal water.
@@davidaIano, fresh water crises officially ended; you are brilliant!
@@davidgrover5996, the spherical salisbury?
Michael Onines, sounds delicious.
Dam if you do, dam if you don't. It's weir, I know.
Kyntteri we live in a society
Ok.
Hi-Yo!
Kyntteri you can leave now
@@seeds8631 I'll get me coat
We have a weir on the river in our town (in the UK) which had a large positive economic impact. It was built to increase water level for what was an inland port back in the 19th century. It helped as bigger boats could come up the river from the sea and it also allowed a canal to join the river without very large locks.
The only downside was the river had to be continuously dredged as sediment got stuck behind the weir. Sadly our town no longer has the port which hit it very hard economically, but the river has reverted to a wild river, shallow and full of fish.
FREAKING FINALLY TH-cam!!!
A super interesting video were I actually learned something I never heard before!
@Nunovia Gottdamnedbizzness
Wut m8?
Tom Scott? I’m sure he can tell you some things you might not know.
@@oldgreggscreamybaileys6618 haha, just came from a Tom Scott vid....
N Jones haha the circle of knowledge in full effect
10/10 for having acoustic treatment in your room.
As a graduate civil engineering student, I am saddened to have discovered this channel only now, but nonetheless also delighted to have discovered it.
I'm not involved with civil engineering, but I am desperate to learn about it because I find it fascinating.
I hate not knowing how the "stuff around me" works.
@@dialecticalmonist3405 that kind of enthusiasm and curiosity is sadly what many civil engineering students lack. A lot of students worry mostly about getting passing grades, and while some worry about actually learning the subject matter, only few bother to see and analyse the practical applications of the program. Kinda sad tbh, and I've been guilty of this, too, in the past
@@stedeestelle2866
That's sad.
Because this is the stuff that makes an "economy" an economy. It makes a society a society. It makes an empire an empire.
Every theoretical discovery in science, was created to ultimately improve the infrastructure of society, and just as often, pure intuitions from the necessity of infrastructure informed theoretical discovery.
It's like the glue between the mental and the physical.
@@stedeestelle2866 true, I was guilty with it to. Especially early on when all of our subjects were just maths, physics and other non related stuff. It got interesting when we had designs subjects though.
There are too many comments to search through to see if it's mentioned, but water treatment plants also have weirs for sedimentation basins. As fair as I've seen, they are fixed and set to keep the water basin at the same height all year.
Thanks
I like that he introduces the sponsor, but saves it for later so we can learn first. Meanwhile every other channel on youtube demands likes, a subscription, and the nOtIfIcAtIoN bElL, then they throw a two minute long advertisement for their sponsor in before the actual video even starts, then they beat around the bush to stretch it to 11 minutes for that ad revenue, and they STILL demand that you throw money at them on Patreon. This guy kicks ass, glad to be a new subscriber
this is probably the first video of this channel i came across but the production quality is so good i might stick around. i like the way he talks, it's easy to follow and clear to understand. but i had to stop the video at around 3:11 because that's where i realized: the white background is actually a textured wall. that means even tho the graphic is made digitally, the background wasn't left completely white. now this indicates to me, that they decided that a completely blank white background would be maybe too boring or too bright on the eyes, but whichever reason, small details like that always amaze me on youtube. because it just makes me appreciate the effort that goes into some videos even more! so keep up the great quality!
Claudio Viola, true, but I was gonna subscribe, to the interesting parts anyway, ...lmbo!
There is an insane amount of work that goes into seemingly simple youtube videos, i learn more and more all the time like you and it makes me appreciate the effort these guys goto
I feel like beaver dams would be interesting to analyse, in regard to these engineering topics.
I was revising for my fluid mechanics paper and came through this and I genuine appreciate engineering
The dam by my place very recently received upgrades, one of which was a passive folded weir for overflow.... it’s nice to know technical terms.
Thank you for the videos!
Came across a piano key weir without knowing what it was and thought it was absolutely fascinating. The water wasn't flowing over, so we were able to climb to the bottom. The vertical walls were probably close to 20 feet high! Cool to finally know what it was
@The Insufferable Tool on a road called 'tail of the dragon'. It's a popular driving road in TN and NC and the weir is on the Maryville TN side. It is not in the super curvy part of the road. I think the road is US 129 but not 100% on that
I haven't seen any fancy wier , just the Normal ones that are basically a slope
I live close to rivers and there was a weir like that like very far into the forest , the area felt private closed from all the tall trees and the weir looked like a nice couch I just decided to sit down on a hot summer day and enjoy all the water slowly following over on top of me , it was great
unfortunately that forest got ruined cuz someone got the land and built like a huge caffee place , and it's very annoying cuz I can't play in my river now with there always being people who can easily look down . how annoying I'll miss my private river spot was fun while it lasted
TH-cam algorithm heard 'flatten the curve ' thought this is relevant in present times and recommended it ,,,,
Very subtle
Tought the same as I heard it! Amazing how both noticed it!
You really think delivering videos that people will click on takes this much work? How about the fact that you clicked on his previous videos?
@@Raison_d-etre the comment literally meant it's not much work , and I just explained how I came across this video .
@@vedvids9319 Yeah okay, if you think transcribing every video to look for current phrases is an easier explanation than the fact that you've clicked on this or similar channel before.
@@Raison_d-etre Im defeated . Pls enjoy the day!
Weirs, especially old weirs, are a danger to Rafters and kayakers. We try hard to know where they are
Hi
Hi
Go good things and Sciences. And go good things. And go good films. And go Kodak's and go good picture groups. And go good things.
"Robert it do go down!"
"Death dams." They look so harmless but suck you down and drown you
@Schlomo Baconberg pp0
In Calgary we replaced a traditional weir (Harvie Passage) that is used for water diversion (and is attributed to deaths every year or so). The new system makes it navigable for people and wildlife. It might make an interesting addition to your next project.
I love your videos. They are excellently crafted and well thought out. Thank you very much for this.
The photo of the Hoover Dam at 4:09 shows a high water level overflowing into the spillway. It must have been taken more than 20 years ago. The water level is so low now that there is about 100 to 150 feet of the intake towers are exposed.
Now you've got me wondering what the flow into the dam is like. I visited recently and the water is significantly lower than the towers or overflow weirs, but there's other places that the water flows out during 'normal' usage, so there would probably need to be significant watershed upstream or perhaps oncoming drought where they want to store that much.
@MrCloudseeker ... the bypass tubes were used during the original construction so they had a dry area to build the dam. The original tubes have not been used since then. Most likely there are more tubes within the dam itself but I have never seen any reference to them. Perhaps they are there to flush silt from the bottom? Who knows?
Well done. I’d say, based on this vid, the instructor is a good teacher. Clear and easy to understand information.
Ah yes that 3:00AM content
Took a break from studying for my fluid dynamics class to find this in my recommended. Thanks TH-cam.
Great vid btw
Great to see a photo of the Burdekin Dam at 2:51. I live downstream of that dam and use it's water on our farms. A few weeks ago we had a large flood here and the dam was 6m over, equating to approximately 16000m^3 of water every second!!
Pretty cool to see an Australian dam on a TH-cam video, Thanks :)
As an Australian, were you also humming Killing Heidi’s “Weir” the whole time you were watching the video?
So youre saying that the photograph is upside down?
Wow thanks!
Ayy another Aussie
Weirs can also be used in the steel making process to help control the flow of molten steel. They are pre cast from a high temp cement called refractory. I surmise weirs can be utilized in many instances for greater control of a liquid.
And that, my dear, is Practical Engineering.
I’m gonna build one. This is what I needed to know. I was gonna just do a normal wall but now it’s gonna be like that triangle shape and help with the flow to not cause damage
Practical Engineering: What is a Weir?
Me: Me
Absolute madlad.
lmao
I see what you did there Mr.....Weir...lol
Related to Tom Weir?
Yo same
"Thank you for watching, and lemme know what you think."
...
You know what I think, sir? This is the best channel I'm subscribed to on TH-cam. Thank you for your hard work, and for making engineering so interesting. All the best.
Interesting. I used to weld and fabricate for a company called Rodney Hunt, who was bought out by Fontain gates and valves. Anyways we used to make those huge gates and valves so big you could literally drive a small car through them. Also did some work in the Hydraulics Dept which was cool to build those units that lift and turn those gates and valves. EXTREMELY high pressure passing through those units. Cool video.
Rodney Hunt! I was just working at a hydro site in Rhode Island with gates made by them. Didn't expect to see the name on YT.
@@_JayRamsey_ yeah it's a great company and pays well too. Great product made from the scrap metal to finished product in the USA. I started off in the foundry and worked my way up. I was able to see the entire process from start to finish. Cool stuff if that's what ur in to. I moved to Mexico from Massachusetts, and I'm driving truck now. But cool stuff.
4:19 Props to the Valve - Half Life 2 developers. I didn't realize that after I beat the hunter helicopter in Water Hazard and opened the gates I jumped over a weir. Solid.
From a game design perspective that was a "sawtooth" as well. Half Life and especially Half Life 2 make liberal use of them.
river talking to pond says"well I'll be dammed"
pond replies "no, you're just weird"
*cough
Ahahah, excellent!
OK now turn your head and cough again...
Well, i'll be "damed".
You're "weired".
Wat'er you saying?
It’d be “dammed.”
this tread is in tension
makes me turn on the "waterworks"
I’m from Texas and growing up I remember swimming in a natural pool of some sort near Georgetown or Austin that had a weir. Also in parts of Arkansas as well, there was a spring that discharged super cold water that they built a weir. Best swimming pools when it’s 100+ out.
The beaver community is like "you wanna see a weir, huh?"
Frankly my weir,
I don't give a dam.
😁
Clever, points for that
I spat my milk
Oh, gee! 😉
The winning comment 👏🏼
DAM!!!!! (Pun intended) very clever haha
I've wondered for years why the weirs on the River Wear (yes, confusing) in Durham (UK, not US) are set diagonally across the river -- in one case, curving until it's almost parallel to the bank. I figured there must be some rationale -- why go to the extra hassle and cost if there's no benefit -- but the length term in that equation makes it all make sense!
TH-cam: hey you know what a weir is?
Me: don’t know, don’t care
TH-cam: what if practical engineering teaches you?
Me: ... aight
I used to work in a Sewage Treatment plant, many of the tanks used to process the water contained weirs. For example, in a round Thickener tank, waste water would be pumped in from the top center of the round pool shaped tank. The heavier waste sludge would sink to the bottom, which instead of being flat like a pool was cone shaped. It was pumped off into a what's called a digester tank to be further processed. The grease would float to the top where a rotating skimmer arm would push it into a box to be collected and pumped away. The now clearer, cleaner water would flow up and over the weirs at the outside circumference of the tank to move on to the next process. We used a formula to calculate the amount of water flowing out over the weirs per hour and the pumping rates of the various pumps letting water into and out of the tanks.
Great summary, much enjoyed. Another long-used method of improving flow was to place the weir at a slant or curve in the channel. The most beautiful example is the weir below the Pulteney Bridge on the River Avon in Bath, England.
That was really interesting and done in a professional way. I honestly thought this dude was a professor or civil engineer. Thumbs way up for nailing it
He is a professional Civil Engineer (as in he has a P.E.) so... Undoubtedly the latter, and education-wise essentially the former
PE: What is a weir?
Me: 80% weird?
Seriously, an interesting and informative item. Thanks.
Yeah, I don’t know why we didn’t have a series like yours when I was in elementary school. When I was in school, the big issue was that girls weren’t interested in engineering, but I think explaining engineering that *everyone* sees in their daily lives should at least get kids *appreciating* engineering. Keep up the good work.
Many of us girls would have been and are now fascinated by engineering
I'm in the weir part of TH-cam again.
Goddam TH-cam...
I love a nice big weir. Sometimes I like to submerge myself right in front of a huge horizontal weir. So much delta P.
Underrated pun.
What? This is the TH-cam I always watch
Lmaoo
I’m sharing this video as quite often I make the pun/joke:
“Ya known what’s weir-ed? Rivers.”
And most of my friends have no clue what I mean.
I'm going to try some of these shapes in my aquarium sumps to improve aeration
このチャンネルの動画たまにオススメで流れてくるんだけど毎回楽しませてもらってる
I've seen many of these structures and even played around on them, but I hadn't ever really thought about their purpose,
even though I have always had an interest in engineering (and in just about everything else, to be honest!).
The vid took my attention straight away with the clear intro, and kept it throughout. The presentation was nicely modulated, smooth and professional.
Well done. Recommended.
Grady, to gain a variable flow control, could you use the horizontal angle of a folder weir? If the point of the folded weir was say 5 degrees higher than the outer sides, a slow flowing river would only flow over the lowest parts of the crest. As the flow increased, more of the weir's crest is used by the water, This would effectively self regulate the weir's geometry.
*commenting because I also wanna know the answer to that one* 🤓
I was thinking the same thing. Geometry such that as the water level rises, the length of the weir also rises.
Interesting thought. There probably is a reason why it isn't done. Or it actually is done.
Otherwise you might just have made a possibly great invention.
Does this image clarify matters? imgur.com/qsoManv
Such structures exist and they're called compound weirs. These structures come in various cross-section geometries which can be tailored to provide better control of water levels under various discharge rates. The structures discussed with a fixed crest height, also have a fixed relationship between the upstream water level and discharge capacity.
The disadvantage of labyrinth weir and piano key weir is the flood debris choke the flow like large wooden logs.
I wanted to add another use for a weir. Years ago I worked for a municipality and we wanted to check an output of a local spring. We installed a weir so we could measure the output
Nobody: "Well my friend, I was a little concerned about how we were going to manage the upstream water level, but after watching this video I think weir gonna be OK."
Also good for separation of oil from water
Es, hasta el momento, el mejor ingeniero civil en el que puedo confiar por las explicaciones claras y objetivas en la practica. Muchas gracias
it's amazing he can do all this and still play guitar for the grateful dead
Weirs are also used for measuring flow rate as well as controlling water level as the equation allows the flow rate to be calculated for various heights above the weir crest which can be monitored by various methods such as electronic sensors that take data and convert the depth to flow rates. As an engineer have installed many weirs in my time. Very useful devices for sure
That Piano Key Weir looks super cool. I think I'm gonna make one as a water fountain.
your content makes engineering very interesting... I am happy that you are still posting!!
You are really good at speaking in front of a camera. The tone of your voice wanders naturally thru a sentence, you don't pepper with uh's and um's, and you explain things very clearly.
Speaking of your writing, I was watching this one and thinking about how your exposition and subject matter is so timeless that an engineer from 1900 could watch and probably relate, and learn a lot. Then you said "24/7", and that would probably stop such a viewer in his tracks.
I used to live in a city that had a variable weir with a rubber membrane, managed with what I can only assume was air pressure. Always found it super interesting.
Same here! It's like long flexible tube, letting water flow over the top
Not sure if its technically a weir as there's no control mechanism, but a river near me had a weir/waterfall/dam installed like 60 years ago to help aerate the water and take away the awful smell it was putting out.
The first I ever heard of a labyrinth weir was when I saw a picture of the one in Waco on the Brazos river. I wondered why it was like that.
Thanks, Cadwaladr, I looked it up. Interesting problem: how to remove debris that clogs up the labyrinth weir. Did they ever solve that? First thought was to add hinges in order to occasionally reconfigure into a huge chevron in order to let the debris float to the banks. Just a thought.
This is by far the most meaningful channel on TH-cam
4 million people: *engineering* is my passion
4.5
I don't give a fuck about engineering video is just interesting
@@siddharth2796 Engineers care - so that you don't have to...
Or is it physics...or both??
Well sort of
I love your channel man, I work in civil construction (excavator operator) and I wish the engineers on our sites were half as interesting as you😂
thank you for what you do, please keep doing it and I cant wait for the next video
The Weirs brought us some of the best Grateful Dead songs. Specifically Bob Weir.
Mike Weir is a Canadian golfer...won a green jacket years ago, on the short side....I guess you could say he is a dam good golfer?
@@artvandelay1967 As the old adage goes... "He who wins a green coloured jacket Is good at gold" or whatever
I sought out basic info on weirs because of my interest in fabricating a basic "first flush" add-on for a rain barrel assembly. Said add-on would include some sort of weired (is that a word?) baffle within a 5-gallon bucket. This came to me as I reflected on sewerage districts use of weirs in their primary clarifiers. Flow direction would be reversed for my first flush design, as compared to a clarifier. Rain input would be from above, outlet would be through a center riser in the bucket...with a screen.
Thanks for the nice video.
In another episode of: TH-cam algorithm brought me here
I searched google for weirs about two weeks ago and now this. first time I've heard of weirs two weeks ago and now google is sending me these things. It's just kinda creepy how much they can know about a person.
me too but I'm quite glad i discovered this video. As a student of electrical engineering I have some technical background but I don't know much (or sometimes anything) about construction, hydraulics and buildings, and also I dont know as much about mechanical engineering as I want to. So im glad TH-cam showed me this video and your channel, it gives a good, well-founded overview of such topics that help you understand why these pieces of engineering are useful, how they work etc. and if you want to know more you know what do search for.
Is that you, Blue Shirt Kid?
You defined what an ogee is. As a carpenter I respect you sir. An ogee is a profile in mill work. And it matches the water fall profile. I guess it could be applied to light as well, as the flow of light over that gradient has high lights and deep shadows. A step curve. Very cool.
*us
“She bid me take life easy, as grass grows on the weirs, but I was young and foolish and now am filled with tears.” 🌸
There's a joke in "Keeping Up Appearances" where the main character Hyacinth Bucket (pronounced _Bouquet_) demands that a lock-keeper open the water way, to which he replies "You could try going over the weir." lol I never knew what a weir was until now.
Oh that episode was brilliant! Especially the end where the rest of her family is relaxing on the bank as Hyacinth straggles by!🤣
My high school senior will be pursuing a career in civil engineering. I hope he finds this content and channel, as interesting as I do. Great job
What do you call a person that designs weirs?
A weirdo.
I thought that description was reserved for you
Weirdee
I think that would translate from Japanese as "the way of the weir".
A weiner?
Boooo
As a child my uncle always made sure to tell me over and over again how dangerous weirs are since he knew a group of people who died in one, and it scared me so much that to this day I get an uneasy feeling if I see one, so I am trying to edcuate myself to fight the fear xD
Knowledge is power, my man
The Potomac River, near Washington DC, has a low weir called “Little Falls dam’. It is well known as a “drowning machine“. I wonder if they changed it to a folded weir, if it would change the dynamics and make it safer??
yes, i think so. folded weirs dont have a stong, consistent flow immediately down the weir. at last, the ones i've seen. which arent deep. that doesnt mean the water doesnt accelerate soon after... like they say, il faut se méfier de l'eau qui dort.
Robert Hall Weir is an American musician and songwriter best known as a founding member of the rock band Grateful Dead. After the Grateful Dead disbanded in 1995, Weir performed with The Other Ones, later known as The Dead, together with other former members of the Grateful Dead.