Yes. Flash0 corruption can only be restored through factory service mode. Baryon Sweeper and magic memory sticks make it possible to enter and take advantage of this mode.
Cool to see a Baryon Sweeper unbrick in the wild. Those dual SD card adapters are garbage. If you're curious what happened the first time, basically only early versions of the PSP-3000 support homebrew Magic Memory Sticks, like DDCv9. All 3000's support using official unbrick software from Sony though, like what you used.
Instead of sacrificing a working batery, if you have a charger, you can use twist ties to connect the circuit to the charging pins (making a loop or a hook around each pin)
Working on it...its just tough with a channel just starting out, no revenue till 1000 subscribers so I have to pay for everything myself. I am trying to make a more detailed video
my old psp had that red screen because of version.txt, i never was able to solve it until i got a job few years ago and had money but at that time the psp was already gone into the trash bin
Please anyone can help, JigKick Media Creator do not work for me, After presing start media creation button , start to work an display beginning installation and then crashing, tried 3 different PC win 10, win 11, simply refuse to work, any help please, hardware part it's working ok for me, amy clue tried memory card adapter, original mamory cards, PSP same results, or any other way to create memory card.
The only issues I had were I could never get a real Sony memory stick to work, which is why I switched to the SD card adapter. With the SD card adapter I had to switch off quick format. It takes longer to format depending on the size of the SD card. Maybe give that a try.
yeah I had the white one as well and it caused nothing but problems. I took a guess that the adapter was an issue and bought the black one, so I would suggest the black sd adapter. Good luck !
you can use an SD adapter, they are very inexpensive on amazon. I will have a couple new videos soon on making the Battery adapter and the memory card, it has just taken a while.
I also got a bricked psp 3000 which im trying to unbrick but I dont got the bench power supply is there any other way I could put more power to the psp cause i think thats why its not turning on
I believe you can just use the AC adapter to power the unit as well, I tried that at one point, but my main issue was making the right SD card, so I had gone back to the bench power supply when I finally got it
Yes it should, the offical github instructions say in step 2 "You can omit an external battery if you power your PSP with a DC charger" github.com/khubik2/pysweeper I know not everyone has a bench power supply.
sorry for the late reply, if you see the codes it means you don't have the right software yet, the easiest way is to get the same SD card adapter I got and use that when making the memory stick. The try DDC again and see if it works, if not make a jig kick clone. You got the hardware side working you just need the right software.
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
If my psp was bricked due to the tampering with the flash files, can this still restore the console?
I think so, the process is for fixing a corrupt flash on a PSP and it just force flashes the firmware so it should work in that scenario
Yes. Flash0 corruption can only be restored through factory service mode.
Baryon Sweeper and magic memory sticks make it possible to enter and take advantage of this mode.
Cool to see a Baryon Sweeper unbrick in the wild. Those dual SD card adapters are garbage.
If you're curious what happened the first time, basically only early versions of the PSP-3000 support homebrew Magic Memory Sticks, like DDCv9. All 3000's support using official unbrick software from Sony though, like what you used.
Could u make me one and ill buy for it
Instead of sacrificing a working batery, if you have a charger, you can use twist ties to connect the circuit to the charging pins (making a loop or a hook around each pin)
I dont have the spare time to build a Baryon Sweeper. How much to unbrick a psp3000 I got from GW?
Baryon Sweeper (In reference to Star Trek's Baryon Sweeper)
Carrying the legacy of PSP chip codenames.
Bro please make proper video new updated without mistake and easy process please😢
Working on it...its just tough with a channel just starting out, no revenue till 1000 subscribers so I have to pay for everything myself. I am trying to make a more detailed video
my old psp had that red screen because of version.txt, i never was able to solve it until i got a job few years ago and had money but at that time the psp was already gone into the trash bin
Can you please make a video on how to make a psp go unbrick?
Thanks
Please anyone can help, JigKick Media Creator do not work for me, After presing start media creation button , start to work an display beginning installation and then crashing, tried 3 different PC win 10, win 11, simply refuse to work, any help please, hardware part it's working ok for me, amy clue tried memory card adapter, original mamory cards, PSP same results, or any other way to create memory card.
The only issues I had were I could never get a real Sony memory stick to work, which is why I switched to the SD card adapter. With the SD card adapter I had to switch off quick format. It takes longer to format depending on the size of the SD card. Maybe give that a try.
I'm trying using a white memory stick, but it keeps failing. I'll have to buy a black memory stick and try it again.
yeah I had the white one as well and it caused nothing but problems. I took a guess that the adapter was an issue and bought the black one, so I would suggest the black sd adapter. Good luck !
what if i cannot find another working psp to create a magic memory card..hope you will also make a video creating magic memory card
you can use an SD adapter, they are very inexpensive on amazon. I will have a couple new videos soon on making the Battery adapter and the memory card, it has just taken a while.
Can you give the link for the jigkick clone? I think my v3 doesn't support my current MMS
Here ya go ! github.com/khubik2/JigKick-Media-Creator
I also got a bricked psp 3000 which im trying to unbrick but I dont got the bench power supply is there any other way I could put more power to the psp cause i think thats why its not turning on
I believe you can just use the AC adapter to power the unit as well, I tried that at one point, but my main issue was making the right SD card, so I had gone back to the bench power supply when I finally got it
Will it work without external battery power supply? I mean Only on usb to ttl or with original power supply connected?
Yes it should, the offical github instructions say in step 2 "You can omit an external battery if you power your PSP with a DC charger" github.com/khubik2/pysweeper I know not everyone has a bench power supply.
ive unbricked so many psp with the solderless method, it looks way more easy. you dont need any battery. :D
how? tell us please
How ? Please share a link
@@Pikachustore_bh th-cam.com/video/ZiyRU0H7CU8/w-d-xo.html
Is it possible to make a tutorial for the battery? Thanks!
I'll see what I can do, I'll try and find a place to add it in my projects list.
Exelente 🎉
I build these. Nice video.
Thanks !
Great job! 👏🏻
Help! Error: com3 port is busy
Check the settings of your TTL device, the one I got had a set of switches to change the mode. Make sure it is in usb-ttl mode
@@TechGuyLife thanks, but The codes are coming, but the screen doesn't light up. Maybe you need to install ddcv9 firmware?
sorry for the late reply, if you see the codes it means you don't have the right software yet, the easiest way is to get the same SD card adapter I got and use that when making the memory stick. The try DDC again and see if it works, if not make a jig kick clone. You got the hardware side working you just need the right software.