✅ Linear AK-11 Keypad ● How to Add New Codes and Delete Old Codes
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- This video will show you how to quickly add and delete access codes in your AK-11 keypad.
Please subscribe for more fixes like this in the future!
HySecurity / Nice Apollo accessories are available here! amzn.to/3oQ4qKn
HySecurity / Nice Apollo 1050 Board - amzn.to/3mly88j
HySecurity / Nice Apollo Remote Control Transmitter - amzn.to/35jF4vJ
Linear AK-11 - amzn.to/3QCXAbk
Replacement gate battery here - amzn.to/3iftvgU
#gateoperator #linear #keypad #niceapollo #liftmaster #ak11 #omron - แนวปฏิบัติและการใช้ชีวิต
great video. super easy to follow.
Saved my life at work today. Thanks
Great!!
Does this programming work for the mdkp model as well?
How do you know if you need to do 1 or 2 relays? Is two relays for a gate with two sides (two hydraulic moving pieces).
How do you create a code to keep the gate open for an extended period of time?
In my world I’ve used two relays for 1) unlock a magnetic lock and then 2) trigger to open the gate. It could also trigger a light to come on or other feature.
Keeping the gate open for a period of time would be a function of the gate opener control board. I don’t think you could manage that behavior from the Linear keypad itself. Thanks for your question!!
You can use relay 2 for the exit gate as well incase you want to hold open both gates
Tried but gate wouldn’t close. So instead I did
01# code# code# 1#
Now it opens and closes. Thanks!
Great point! Some gate operators need the relay command (10) vs. toggle (1). Thanks for calling that out!!!
I had someone try to come into gate they didn't have code but gate came open and will not close now.
When I place pad in reprogramming mode gate closes perfectly, but after a while it opens back up and remain on green light stays on pad.
I am programming this gate code and I can get in but I can’t get out. This is a cantilever gate. Any ideas? I did the 1# and the 10# and still nothing. Please help!! Thank you
#ApacheRanch, Excuse me sir, I did this and it worked, I was able to open the gate from the wall control panel, but after doing it, my remote control stopped working, now every time I press the buttom on the remote control, I can hear an small clicking sound coming from the motor, but it doesn't open it any more! the code that I entered still works and I can open the gate from the panel, but not with my remote control, can you help me with this? Do you know how to re-program the remote control again? I really appreciate it If you can assist me with this matter, thank you.
Really your Linear AK-11 is a self-contained unit (ie stores the codes internally) and it does not do anything back to your control board except send a "go" signal to either open/close/stop etc. So not sure how your remote was impacted. I have several videos on how to program Nice/Apollo remotes to the 1050 control board - but not sure what kind of setup you have in place. Take a look here at this playlist and see if anything related to remotes helps out: th-cam.com/video/bNUB3LesJt0/w-d-xo.html
Does the gate need to be open or close to add and delete codes
@@AngelaJohnson-n6t does not matter.
How do I get the gate out of latch code?
How do you program a code with an asterisk?
To my knowledge it only accepts 4-digit codes using digits 0 through 9. Thanks for your comment.
Hi, thanks for the video! I was able to change the code and the gate opened, but the gate will not close…what would cause this?
Your system might need the “step” function instead of “relay”.
Try this instead:
01# code# code# 1#
Note the final 1# instead of a 10#.
What kind of operator control board are you using?
@@ApacheRanch ok, I tried that and everything seemed fine until I hit **# to end admin mode…and then it opened and will not close
I am having the exact same problem
Thank you for your video, I had the same issue with the gate not closing and changed the final code from 10# to 1# and now works perfectly.
I also had the same problem, it won’t close , i changed it from 10# to 1# and it works!
So, you have to enter programming mode 1st?
Absolutely.
It let me add a code, it opened the gate but now it won't close 😅
Your system might need the “step” function instead of “relay”.
Try this instead:
01# code# code# 1#
Note the final 1# instead of a 10#.
What kind of operator control board are you using?
@ApacheRanch I had to call support, they squared me away. I appreciate the video and response!