Hi Ish, great video. Very helpful. I’ve been thinking about doing this on my wife’s Ecosport. Can you confirm what you had to buy as extras. ie: Does the DAB dongle and CAN bus module need to be added as separate purchases? Thanks Paul
Hi Mate watching this trying to set up my CarPlay and I seem to be missing the third cable you talk about at 11:20 . Have you still got this laying around and if so is there any way I can buy it off of you? If not no worries great video and helped me a lot :)
I’m in the UK aswell, I have brought from a different seller but I think it’s just a generic connection cable with these units, mine only came with pack A so I got pack B sent over but they didn’t include this cable. Connection looks the same as it needs to be for my unit
Looks great, thanks for the video .. I ve got one question if you don't mind, the screen looks a bit far from your standing position, is this the case, are you able to reach to it and control it easily especially while driving ?
Really useful video. Thanks for taking the time to explain and help others. I've not bought the unit yet but can you tell me if it is possible to navigate around a thumb-drive from the steering wheel controls? Not just navigating between tracks but can you navigate between folders/albums as well? Cheers.
Hi Ish thanks for the vid, I Installed a very similar screen to the one in the video however the central controls and the steering wheel controls aren’t working and I have to turn the volume up on the screen, also the code you used doesn’t work to access the extra settings. Just wondering if you have a solution? Again thanks for the video 👍
Each manufacturer has its own code . Go back to seller and ask or you can google combinations for your hardware and software . The canbus is set incorrectly you will need to set correct canbus as in video . For this you need to know make of canbus and try different Ford combinations for model
Love it! I currently have a 2016 Fiesta and was thinking of getting this exact model! Do you find that the giant screen is distracting while driving? It's quite a bit larger than the standard unit, that's my main concern atm
It’s my friends car . He does say it’s large and can be a little distracting.but doesn’t block view . Like anything you will get used to it eventually.
Sorry I don’t fit as a job . I only did as favour for friend. It’s not that hard if you follow video. Links in description seller is worldwide . I’m in the uk so paid extra so import didn’t need to be paid
Hey mate great video. Mines working great . Only thing I couldn't see was my original USB cable? Did you bring that up from under passenger side ? Also how do you get this hidden menu as my steering controls work but my volume knob doesn't?
For original usb . The wiring should already be there for factory unit . Check video . To get into hidden menu will be under factory setting . It will be only menu you can’t get in without passcode
Looks great.I have a Ford ecosport.i am upgrading the radio to touch screen.your dashboard is about the same as mine.did you loose the cd player after you installed the new unit. Thanks Chris
great install, i have a 2016 fiesta st3 and would like this set up including the reverse camera, if i brought my car to you how much would you want and could you install it all in a full day?
Sorry mate I don’t do installs as a job I just did this as a favour for a friend . I have videos for both the reverse cam install and stereo install . As a novice if you follow video I would budget 3-4 hours for reverse cam . Stereo install can be done in 1-2 hours
Its how you want it to operate. As the canbus does the switching on the unit. Its about how you want to power. If you want it powered only in reverse then you need reverse light. If you want it for DVR also then you can wire to permanent live.
Did you check you have selected correct canbus in hidden menu . Was the steering remote working before with old . I’d not you might need to clean contacts . Otherwise you have wrong canbus selected
Hi Ish, does the replaced head-unit disrupt the electricity? I heard Ford known for electrical problems. Quite worry to install android lcd on my fiesta focus.
very nice video, question, When i changed the stereo, now the center dash console where the ok bottom, and the numbers are the light seems to be not working, i wonder if you have any idea why? thank you.
Check you haven’t dislodged any cables . Stereo shouldn’t affect the lighting . Make sure canbus and stereo firmware on latest and try different Ford canbus settings
Hi, I consider to buy this T10 for my Ford Fiesta 2017. I mentioned the original car radio has settings like side mirror flipping in and out. Enable or disable inside lights. That kind of things After installation with T10 does this stil work? How about cd player? Cd player is less important but car settings to me it can be a deal breaker. Then i was wondering does your steering wheel and panel control still works? Left- right-up-down- ok- info buttons. The original Mic for handsfree calling a be used or must be replaced? Voice control still works after installation? Hope u may answer my questions. Thanks for sharing us to install T10. Kind regards, Roy
1) not sure my car doesn’t have . Ask seller there lots of canbus setting that my car doesn’t have 2) no cd player as you take that unit out . 3) steering controls work if you select correct canbus on menu 4)Ford voice probably won’t work . But carplay android auto voice will work . Call accept / reject work with Bluetooth on steering controls . But it’s through the android unit mic and system which isn’t as good as Ford so you need to compromise there . I would ask some others on here that have previously bought what they think .
I have bought a vertical style screen for my fiesta, got the canbus and my screen detects when cars in reverse and when doors are opened but it doesn't detect my steering wheel buttons I've been trying to fix it for over a year with no successe Do you have any idea of what it can be of how to fix it? BTW Liked the video you have explained all the steps well
@@netanelabraham9046 first of all was the steering controls working before . My friends one intermittent so I had to take them out and clean them using contact spray. Not hard to do check TH-cam there’s two other options . One is try different canbus config files for Ford cars on secret setting menu . The other ( I don’t know if this will work is to isolate the Two screening wheel canbus cables from Ford harness and attach them to the key 1 and key 2 on unit ( if it’s has them ) this effectly bypasses the canbus and you can try use the key learning app on unit . This is a shot in the dark as I I don’t know your unit but most android units have this .
@@MAR23-m8y you connect to reverse light for power . Eg you only want to power on camera when in reverse, otherwise it will be on all the time . If you power from head unit you can possibly use reverse pink wire to see if it gives 12v when in reverse only
@@ishanperusinghe That makes sense, the manual that came with the camera tells me to power via the pink cable as well as connect it to the reverse lights, a bit confusing.
hi im ordering unit and arial next month ill update with some info when installing, one question where did you take the 12v power for the arial back to
Can’t quite remember but you can use a tap fuse and find a switched live in fuse box . Or possibly test the antenna power from new stereo ( blue wire ) to see if you get 12v
Hi think I may have solved the key problem and the kph on the install the seller told me to connect every plug so I connected the plug from the old radio display as soon as I removed that the central locking came back the kph reverted to mph and the unit shuts down with the key and starts as well hope this helps the others with the same problem
@@duncanmandela62 hi when I connected the head unit I connected the smaller black plug from the display that you remove to the head unit when I disconnected it the central locking works and it's back to mph
Fantastic video well impressed. So much so we ordered everything from your links and it arrived today. Only think is the unit is a little different and were struggling to get the nav working it sees satellites but Waze and Google maps don't work. Also steering controls won't register when setting them up. It's a 2012 fiesta pre face lift. Any helpmuch appreciated
For google and Waze if using on the android interface make sure apps up to date and connected to internet. For steering controls check you are connected to internet and go to hidden menu and make sure correct canbus is selected the brand of canbus box should be on the little red box . Try Ford simple or Ford transit
@@ishanperusinghe thanks buddy appreciate taking the time to reply it's a shame I didn't get the same model from the link it might have gone a bit smoother. Lol. Cheers buddy.
@@xturbox7158 no worries there mostly the same anyway . Only a few themes differences . So you should be able to get hidden menu code from seller . And selecting canbus should be similar .
Hello Ish Could you tell which type of connections work for you? A or B I have the same factory multimedia and not sure which exactly to choose (another brand provides the same options)
It’s in video . But to be sure you need to take off stereo it’s hard to tell from front or ask seller to send both . Tell him you came from TH-cam video .
Great video. The only thing missing is confirmation that the centre column controls still work. Its illegal where i am from to touch a touch screen while driving for probationary drivers (first 3 years) and the state has special automatic cameras to detect this at random locations. Obviously the screen is too far away anyway. Steering wheel controls are ok, but the volume knob is better.
Hi Ish, i realised I have a different unit to yours but is similar its called EKIY. My miles have to km and my fiesta wing mirrors dont fold on locking too. Would you have any advice or experienced something similar this? Thanks
No sorry . Speak to manufacturer have connected the unit to hotspot and tried all software updates . Could be a dodgy canbus decoder too ( red box ) you can try disconnecting that and trying. To isolate problem
Yep was able to change km to miles on an app installed on there called car info. But not the mirrors not folding, manufacturer said he will have to ask engineer and get an update sent
@JD-29 hi just an update I have had my unit installed for over month. My power mirrors did not work so went back and forward. In end they said they could not make them work did u get any joy
It should still continue to work with iOS updates .but that’s the main problem with zlink and Tlink it’s app version is built to the android os of the headunit and doesn’t update . The better way to do it is maybe buy without zlink Tlink and get a Carlinkit usb dongle that does wired and wireless carplay and android auto . I have one of those on my Range Rover evoque with android unit and they constantly update both the app and firmware of dongle for bugs and new releases of iOS . I have had that installed since 2019 and it’s the main thing I use on that infotainment system . However manufacturer says t link is more stable than zlink which was really buggy
@@JD-29 T link is what comes with this stereo for carplay and is newer version of z link I believe. Carlinkit dongle is what I recommend . You need to have android headunit like the one reviewed for it to work. But it’s just a dongle you connect to usb of stereo and apk to install . Works great a.aliexpress.com/_Ex0gqtR . I would forget about z link and get this dongle and use this instead
No you don’t need antenna you just need the usb dab dongle . And a packs adaptor to marry the connection from dongle aerial input and oem fakra connection. Have a look on Amazon for adapters
Hi Ish , great video, east to follow, just had mine delivered maybe a different model to yours, everything seems to be working, but for the life of me, i cannot get the original factory controls to work ? Any ideas. Many thanks
You mean the steering controls on the wheel . This means you don’t have canbus setup properly ( Redbox ) you need to connect to internet first , go into hidden factory menu . And select correct vehical etc . A bit of trial and error .
@@ishanperusinghe Cheers Ish, yes the ones on the wheel, but also the main control panel, which controlled the cd player etc,etc. Thanks again, Much appreciated.
Hey man, i had an aliexpress heaudnit installed in my 2013 Mazda 3 and what i noticed is that the unit started getting really really hot. It was a 5G, 8gb ram and 128gb storage unit so i assume that power caused it to get hot. However, there was the same unit with a cooling fan option and im considering getting it and returnijg the original. Is it normal for a headunit to get hot and is it safe for the cables and stuff behind the unit? Could it catch fire?
I also bought similar headunit, but frame didn't fit. mine is 2017 fiesta model in USA. the frame panel hooks in the back are at different slot that originial one. and also at the front side my original radio frame has one hook at the middle but this one has 2 hooks on the side and middle one is very smaller than the original. So seems like this kit is not universal to 2017 models as advertised by sellers.
@ishanperusinghe possible for the back clips. there is the metal piece at the place where the front clips are supposed to go. Only way would be cutting the front clips and attaching magnetic tape on the frame. I haven't tried that one and don't know how much secure that would be.
Hello friend! My ford fiesta mk7 has tire pressure sensors and the quadrant errors appear on the small viro of the original radio. If I switch to this radio, will all this continue to appear or will I lose functions? Thanks for the video.
There was a menu to show tyre pressure etc not sure if it’s covered in video , door open etc . Not sure if this works or not as I don’t have and I turned off settings to pop ups . It’s all about selecting right canbus in hidden menu as signal is decoded and outputted to stereo . The tyre pressure should also show on driver dash if not showing on stereo . Not sure about quadrant error . Ask manufacturer send screenshots to help. This stereo isn’t perfect there will be some give and take on oem functionality
@@ishanperusinghe nice thanks. And yeah it's just I have a weird thing for redundant controls. I hate something being there that doesn't work even if it's not needed
@@zeno9580 sure I will need to ask my mate to test them out again as I can’t remember if they all worked . Volume did and front and back buttons on tracks
Hi, How do i get the normal radio buttons working again? Steering wheel works fine. I looked at canbus settings, none of them make the normal radio panel work. I'm getting open door message now, so thats fine. But my mirrors wont close automaticly while locking the car. I cant find that setting anywhere. Wich antenna did you use? Thanks for a reply!
Hi mine worked with simple transit I believe. For antenna the link is In description . Was stereo from same seller if so I believe you can update the canbus with new protocols if connected to internet . Also check the hidden menu items and car setting for folding mirrors . My friends didn’t have folding mirrors
@@ishanperusinghe thanks for your reply. Where is the hidden menu? Do you mean developer menu? Factory menu i can find. No problem. Tried different Fiesta settings in can bus menu. Gonna try transit
Hi just fitted TS7 head unit and my mileage etc (screen between rev and speedo) are. Ow in Kilometres can you help, I’ve gone into Theme and places into miles but this has not affected the mileage etc
Have you read the comments few people mentioned this . Solution varies from low battery to changing car info app. If none work then you can try change canbus config to another Ford car . That’s the only thing that can affect the millage possibly. If that doesn’t work ask manufacturer. Report back if you fix so solution can help others
I think there is option in hidden menu for door left or right . I turned it off completely as it’s annoying . I set canbus to mine Ford simple or try transit
I installed the same stereo into my Ford fiesta 2013, the only issue I encountered was that the odometer was changed to km/hr instead of mph. Any idea how I could get this to change back or what I could do in settings. I couldn’t find anything for the units on settings…
Couple of things . If the stereo caused the change then make sure you have all software updates done to unit and in factory menu there isn’t something set to Km/hr . Also the stereo really shouldn’t affect odometer setting as it’s a separate ecu . Check this article www.vehiclehistory.com/questions/how-do-i-change-the-odometer-from-kilometers-to-miles-on-the-ford-fiesta-128129
It changed my car to kmh from mph and idea how to change back and my mirrors don't close when locked what factory setting u use I selected basic fiesta 2011
I’m have just had This unit or very similar android- can’t get my steering wheel buttons to work and it seems to have an impact on my AC. Do you have any advice?
For steering wheel control . Connect unit to internet and go to factory setting as change car brand and canbus . It’s around 20.04 min in video . For fiesta it should be set to simple canbus . This may fix ac controls also . You can disable pop ups on screen via on the setting also
@@mikeymcgrath3337 I’m not a expert but you could try setting to fiesta / Ford transit and set canbus to simple . Please report back for others if it worked or not
@@ishanperusinghe I have tried setting it to them. Other providers that are not rise and it doesn’t seem to make any difference in the settings but I might try setting it to a different Ford car and see what happens. I will report back here to support anyone else I get to the unit
@@mikeymcgrath3337 any luck fixing this? I just got my radio connected, it works, but the center column doesn't respond, doesn't even light up. The same with steering wheel controls. But the radio detects that the door is open. Strange.
Hi Ish, sorry to trouble you again, i have seen another screen similar to the one i have just sent back, only problem it is on Android 10, cab you update the system to Android 12 ? Many thanks
No you cannot upgrade. I can only advise on the one I purchased . Each manufacturer customises android version slightly differently. I would go for android 11 and above personally. More than unit seller is more important incase of issue
Only way to upgrade is via custom rom but would not advice unless you understand how to do correctly and also you won’t get manufacture support once you do .
Hi just fitted a junsun android unit two problems if you know the solution the locking on my key has stopped working and how do you get the artist or album pictures when playing music I use Amazon music it comes up on my phone thanks
Keys stopped working shouldn’t be issue with stereo . No key stuff goes through stereo . You might have pulled out an aerial or blown a fuse. For album art it’s down to factory player if it doesn’t support album art then you don’t have . Also can’t comment on other stereos only one I installed
Miles on small screen by steering wheel now say kph have tried several menus how do I change it to miles thanks very stressful day trying to get the centre panel back
Did you get same stereo ? If so you need to go into the factory menu and select correct canbus . It’s should be same as mine or simple . Also before doing this please connect unit to internet via WiFi. Check 20.04 in video
I don’t think so . It only allows for ac controls and door open sensors from what I could see . It’s also very annoying seeing these pop ups so I disabled in menu
Not sure what you mean . It replace the original stereo completely. The whole factory cd unit is replaced/ bypassed . It will work with the cars canbus eg you can have a graphic come up saying door is open etc . But I turned off .other oem features like parking cameras Etc should be supported as per sellers page .
I’ve found the EQ settings and “no reverse camera” setting fine whilst using the device, but it doesn’t save the settings to apple CarPlay/Tlink so I get a blank screen when I put it in reverse and my audio sounds weak using CarPlay. Any suggestions?? Many thanks!! This is a very well put together video
Have you tried the hidden menu . You can adjust volume controls in there I belive. It’s in the factory setting menu and requires code . If same as mine will be same code but contact manufacturer if different. Have you put tlink as nav options if so don’t use as a nav in system settings
So what’s happened it’s because I’ve pulled the battery before I installed so there was no way I’d blow anything so I’m thinking I need to change the settings for the car in order for it to allow me to then set my mirrors back to folding in and out when locked or unlocked I’ll try and figure it out and let you know 👍
@@ishanperusinghe I've got the same car in this video and I tried setting it to a Fiesta 09-13 and even the mondeo before 2013 and both times I don'y get a response from the steering wheel controls. Also non of the controls on my store work too aparat from the hazard lights and the lock/unlock button
@@jodrin9 try Ford transit simple . If not then the Redbox ( canbus decoder ) maybe faulty . Make sure u picking the correct brand also of canbus. Was the steering remote working before . Mine wasn’t had to take apart and clean as the Ford fiesta steering controls contacts get dirty
Double check as B is an extension of A cables . Eg one extra from memory. Message seller with pictures . You can also try posting some pics here of your cable. www.fordownersclub.com/forums/topic/139648-android-touch-screen-stereo-with-carplay-android-auto-dab-dsp-and-reverse-cam-install-review/#comment-965174 and I will see if I can help
Answered below . It’s hard to say due to your height and driving position . I would say it covers more Bonet in my vision and 5,8. It’s probably a few inches taller than the sat nav Ford sync
@@Luuuccassss is it just factory system . Have you tried the obvious stuff live changing eq settings . Also is unit from same seller as mine . As mine has dsp
Na man . They all uses the audio connections from main harness . Also it’s 2023 so is there a need for cd player . Once you make swap to ou won’t car about cds anymore put all your music on flash drive
Hi Great video I been looking unit for long time. Would you have the email address so I can email them some questions and photos. I have 2011 titanium with Sony unit and cruise control on steering like to check all works
Your best bet is email seller . Im not a distributor of the unit . I just put reviews to help others . Cruise will be uneffected and I believe the Sony unit is also compatible. Some one in comments has already said
@@rickyaustin9104 if you go to aliexpress link for stereo u can message seller . It’s like eBay contact seller. No direct email it’s via aliexpress platform
@@rickyaustin9104 if you download the app , log in and open link . You will see ‘message ‘ at the bottom of page . Remember they are in China timezone so if you in uk . Message today get reply in morning . When ordering remember to pay little extra so you don’t get customs charge. Also check comments bellow for convo with ‘ddrt’ he replaced a Sony unit
Thanks for this. How can I contact you to send you a video of the problem I have? Basically everything is plugged in but the CarPlay won’t turn on, but it’s charging, the USB works, and when you turn on the car you’ll see the screen coming on then goes off and won’t do anything. I have few videos. Any idea what can it be ? Link to video th-cam.com/video/BHvO6AKIeE4/w-d-xo.html
You can upload the video and put link here . But the carplay works via the units Bluetooth . Once it’s connected to Bluetooth you will get message on phone to enable carplay. Remember I can’t only comment on this unit. Also make sure unit is up to date
@@emmanuelrusaka the harness should be plug and play . Try disconnecting the canbus decoder ( Redbox ) and see if screen stays on . If it does then canbus decoder box faulty . Is unit from same seller as mine . Next will be to speak to selller
Great to see someone installing a real antenna
The ones that stick to screen suckkkkkkkkk
Did you get the original AUX and USB ports of the car to work, with that connector you were talking about (16:13)?
It’s the original usb that will work . Not the aux
Hi Ish, great video. Very helpful. I’ve been thinking about doing this on my wife’s Ecosport. Can you confirm what you had to buy as extras. ie: Does the DAB dongle and CAN bus module need to be added as separate purchases?
Thanks Paul
You get dab module from seller in description. But aerial I added was from another seller also in description
Hi Mate watching this trying to set up my CarPlay and I seem to be missing the third cable you talk about at 11:20 . Have you still got this laying around and if so is there any way I can buy it off of you? If not no worries great video and helped me a lot :)
Sure did you buy it from this seller . Not sure it work for anyone else. I’m the uk by the way
I’m in the UK aswell, I have brought from a different seller but I think it’s just a generic connection cable with these units, mine only came with pack A so I got pack B sent over but they didn’t include this cable. Connection looks the same as it needs to be for my unit
@@smith.e597 post your email on here will let you know when I got it . And you can delete after
Tps sensor reset?
Looks great, thanks for the video .. I ve got one question if you don't mind, the screen looks a bit far from your standing position, is this the case, are you able to reach to it and control it easily especially while driving ?
Yeah you can reach . Might need to lean a little forward but as mentioned. If u got steering control working your fine
Fitted mine today thanks for the video helped a lot
Hope it went well . Enjoy
Is it distracting? Especially during night (Isn't it too bright at night?)
Really useful video. Thanks for taking the time to explain and help others. I've not bought the unit yet but can you tell me if it is possible to navigate around a thumb-drive from the steering wheel controls? Not just navigating between tracks but can you navigate between folders/albums as well? Cheers.
Sorry I haven’t tried this and I don’t have car anymore . But it would be easier to do it via the screen
Hi Ish thanks for the vid, I Installed a very similar screen to the one in the video however the central controls and the steering wheel controls aren’t working and I have to turn the volume up on the screen, also the code you used doesn’t work to access the extra settings. Just wondering if you have a solution?
Again thanks for the video 👍
Each manufacturer has its own code . Go back to seller and ask or you can google combinations for your hardware and software . The canbus is set incorrectly you will need to set correct canbus as in video . For this you need to know make of canbus and try different Ford combinations for model
Love it! I currently have a 2016 Fiesta and was thinking of getting this exact model! Do you find that the giant screen is distracting while driving? It's quite a bit larger than the standard unit, that's my main concern atm
It’s my friends car . He does say it’s large and can be a little distracting.but doesn’t block view . Like anything you will get used to it eventually.
1 year later do you still recommend this? Im thinking of installing this and the reverse cam to my 2009 mk7 fiesta
Yeah it’s better than factory
Where you from mate I'd love you to fit one of these for me you done a great job
Sorry I don’t fit as a job . I only did as favour for friend. It’s not that hard if you follow video. Links in description seller is worldwide . I’m in the uk so paid extra so import didn’t need to be paid
Hey mate great video. Mines working great . Only thing I couldn't see was my original USB cable? Did you bring that up from under passenger side ?
Also how do you get this hidden menu as my steering controls work but my volume knob doesn't?
For original usb . The wiring should already be there for factory unit . Check video . To get into hidden menu will be under factory setting . It will be only menu you can’t get in without passcode
Looks great.I have a Ford ecosport.i am upgrading the radio to touch screen.your dashboard is about the same as mine.did you loose the cd player after you installed the new unit.
Thanks
Chris
Yes I did . I took the whole cd unit out as it is bypassed by the new stereo
great install, i have a 2016 fiesta st3 and would like this set up including the reverse camera, if i brought my car to you how much would you want and could you install it all in a full day?
Sorry mate I don’t do installs as a job I just did this as a favour for a friend . I have videos for both the reverse cam install and stereo install . As a novice if you follow video I would budget 3-4 hours for reverse cam . Stereo install can be done in 1-2 hours
Hi ish, great video. would I be able to do standard stuff such as resetting the tyre sensors through this android unit?
Thank you
Best to ask seller . I’ve not used that feature on unit
Hello, do you know if the reverse camera works without taking the signal from the reverse light? Thanks in advance, really appreciate your video!
Its how you want it to operate. As the canbus does the switching on the unit. Its about how you want to power. If you want it powered only in reverse then you need reverse light. If you want it for DVR also then you can wire to permanent live.
Great video mate I've managed to get the original radio volume working and skip but the steering wheel one will not work any advise
Did you check you have selected correct canbus in hidden menu . Was the steering remote working before with old . I’d not you might need to clean contacts . Otherwise you have wrong canbus selected
Hi Ish, does the replaced head-unit disrupt the electricity? I heard Ford known for electrical problems. Quite worry to install android lcd on my fiesta focus.
No issues on fiesta
very nice video, question, When i changed the stereo, now the center dash console where the ok bottom, and the numbers are the light seems to be not working, i wonder if you have any idea why?
thank you.
Check you haven’t dislodged any cables . Stereo shouldn’t affect the lighting . Make sure canbus and stereo firmware on latest and try different Ford canbus settings
9:05 where to get that Cable? I have never received it...
Did you buy from same seller as me . If so they would have asked you which type of stereo you had and hence the cables
I bought one on Ebay. I asked them several times that I needed another cable but they wont accept that fact.@@ishanperusinghe
Hi,
I consider to buy this T10 for my Ford Fiesta 2017. I mentioned the original car radio has settings like side mirror flipping in and out. Enable or disable inside lights. That kind of things
After installation with T10 does this stil work?
How about cd player? Cd player is less important but car settings to me it can be a deal breaker.
Then i was wondering does your steering wheel and panel control still works? Left- right-up-down- ok- info buttons.
The original Mic for handsfree calling a be used or must be replaced? Voice control still works after installation?
Hope u may answer my questions.
Thanks for sharing us to install T10.
Kind regards,
Roy
1) not sure my car doesn’t have . Ask seller there lots of canbus setting that my car doesn’t have
2) no cd player as you take that unit out .
3) steering controls work if you select correct canbus on menu
4)Ford voice probably won’t work . But carplay android auto voice will work . Call accept / reject work with Bluetooth on steering controls . But it’s through the android unit mic and system which isn’t as good as Ford so you need to compromise there . I would ask some others on here that have previously bought what they think .
@@ishanperusinghe thank you for answering my questions 👍
Hi all I found under car settings app unit mileage set to the imperial unit mileage this will set dash display to Mph hope helps
Do you know how to access the Old Ford menu? I can’t reset tyre pressure light with this installed
Sorry I dont . Ask the seller . Should be menu somewhere
No problem. It’s a crap Chinese supplier but thanks
I have bought a vertical style screen for my fiesta, got the canbus and my screen detects when cars in reverse and when doors are opened but it doesn't detect my steering wheel buttons I've been trying to fix it for over a year with no successe
Do you have any idea of what it can be of how to fix it?
BTW Liked the video you have explained all the steps well
@@netanelabraham9046 first of all was the steering controls working before . My friends one intermittent so I had to take them out and clean them using contact spray. Not hard to do check TH-cam there’s two other options . One is try different canbus config files for Ford cars on secret setting menu . The other ( I don’t know if this will work is to isolate the Two screening wheel canbus cables from Ford harness and attach them to the key 1 and key 2 on unit ( if it’s has them ) this effectly bypasses the canbus and you can try use the key learning app on unit . This is a shot in the dark as I I don’t know your unit but most android units have this .
@@netanelabraham9046 this post might help also - xdaforums.com/t/ford-fiesta-steering-wheel-buttons-not-working.4081065/page-2
@@ishanperusinghe will try and let you know
Thank you :)
Btw ive seen a bunch of vids saying that if your head unit comes with a canbus you dont have to connect the reverse cam to the reverse lights
@@MAR23-m8y you connect to reverse light for power . Eg you only want to power on camera when in reverse, otherwise it will be on all the time . If you power from head unit you can possibly use reverse pink wire to see if it gives 12v when in reverse only
@@ishanperusinghe That makes sense, the manual that came with the camera tells me to power via the pink cable as well as connect it to the reverse lights, a bit confusing.
hi im ordering unit and arial next month ill update with some info when installing, one question where did you take the 12v power for the arial back to
Can’t quite remember but you can use a tap fuse and find a switched live in fuse box . Or possibly test the antenna power from new stereo ( blue wire ) to see if you get 12v
Hi think I may have solved the key problem and the kph on the install the seller told me to connect every plug so I connected the plug from the old radio display as soon as I removed that the central locking came back the kph reverted to mph and the unit shuts down with the key and starts as well hope this helps the others with the same problem
Hi @Mrpj1701 how did you sort out the issue am currently experiencing the same problem km steering wheel keys not working and also central locking
@@duncanmandela62 hi when I connected the head unit I connected the smaller black plug from the display that you remove to the head unit when I disconnected it the central locking works and it's back to mph
@@MrPhil1701 that is what i have exactly down however i dont have the steering keys working and the reverse cam as well
@@duncanmandela62 same here gave up trying to get the steering wheel buttons working
Fantastic video well impressed. So much so we ordered everything from your links and it arrived today. Only think is the unit is a little different and were struggling to get the nav working it sees satellites but Waze and Google maps don't work. Also steering controls won't register when setting them up. It's a 2012 fiesta pre face lift. Any helpmuch appreciated
For google and Waze if using on the android interface make sure apps up to date and connected to internet. For steering controls check you are connected to internet and go to hidden menu and make sure correct canbus is selected the brand of canbus box should be on the little red box . Try Ford simple or Ford transit
@@ishanperusinghe thanks buddy appreciate taking the time to reply it's a shame I didn't get the same model from the link it might have gone a bit smoother. Lol. Cheers buddy.
@@xturbox7158 no worries there mostly the same anyway . Only a few themes differences . So you should be able to get hidden menu code from seller . And selecting canbus should be similar .
Hello Ish
Could you tell which type of connections work for you? A or B
I have the same factory multimedia and not sure which exactly to choose (another brand provides the same options)
It’s in video . But to be sure you need to take off stereo it’s hard to tell from front or ask seller to send both . Tell him you came from TH-cam video .
Great video. The only thing missing is confirmation that the centre column controls still work. Its illegal where i am from to touch a touch screen while driving for probationary drivers (first 3 years) and the state has special automatic cameras to detect this at random locations. Obviously the screen is too far away anyway. Steering wheel controls are ok, but the volume knob is better.
you in NSW?
if you go to card settings and change the model of the car on the logo in the canbus setting will make it work.
Hi Ish, i realised I have a different unit to yours but is similar its called EKIY. My miles have to km and my fiesta wing mirrors dont fold on locking too. Would you have any advice or experienced something similar this? Thanks
No sorry . Speak to manufacturer have connected the unit to hotspot and tried all software updates . Could be a dodgy canbus decoder too ( red box ) you can try disconnecting that and trying. To isolate problem
@@ishanperusinghe thank you!
@@JD-29 let us know if it worked or root cause of problem. Might help someone else
Yep was able to change km to miles on an app installed on there called car info. But not the mirrors not folding, manufacturer said he will have to ask engineer and get an update sent
@JD-29 hi just an update I have had my unit installed for over month. My power mirrors did not work so went back and forward. In end they said they could not make them work did u get any joy
Hey mate great vid! One question does the carplay update with new versions of IOS?
It should still continue to work with iOS updates .but that’s the main problem with zlink and Tlink it’s app version is built to the android os of the headunit and doesn’t update . The better way to do it is maybe buy without zlink Tlink and get a Carlinkit usb dongle that does wired and wireless carplay and android auto . I have one of those on my Range Rover evoque with android unit and they constantly update both the app and firmware of dongle for bugs and new releases of iOS . I have had that installed since 2019 and it’s the main thing I use on that infotainment system . However manufacturer says t link is more stable than zlink which was really buggy
@@ishanperusinghe ok thank you!
@@ishanperusinghe the one i brought comes with zlink, is there anyway to change this if its buggy and get tlink? Thanks
@@ishanperusinghe was the one you fitted zlink?
@@JD-29 T link is what comes with this stereo for carplay and is newer version of z link I believe. Carlinkit dongle is what I recommend . You need to have android headunit like the one reviewed for it to work. But it’s just a dongle you connect to usb of stereo and apk to install . Works great
a.aliexpress.com/_Ex0gqtR . I would forget about z link and get this dongle and use this instead
my car already has Digital radio do I need to buy the antenna like you did?
No you don’t need antenna you just need the usb dab dongle . And a packs adaptor to marry the connection from dongle aerial input and oem fakra connection. Have a look on Amazon for adapters
What about traction control and tyre pressure? In old unit of ford trough the screen you can control it , now with new screen?
@@Stagmike don’t know about traction control and tyre pressure mine didn’t have those options . But you can change unit
Hi Ish , great video, east to follow, just had mine delivered maybe a different model to yours, everything seems to be working, but for the life of me, i cannot get the original factory controls to work ? Any ideas. Many thanks
You mean the steering controls on the wheel . This means you don’t have canbus setup properly ( Redbox ) you need to connect to internet first , go into hidden factory menu . And select correct vehical etc . A bit of trial and error .
@@ishanperusinghe Cheers Ish, yes the ones on the wheel, but also the main control panel, which controlled the cd player etc,etc. Thanks again, Much appreciated.
@@1Yerffej try Ford transit or I think there one called simple
@@ishanperusinghe Thanks Ish, will give that a go, so frustrating.. 🙄
@@1Yerffej let us know if it worked
Is there a loom adapter so that that you can keep cs player working aswell? Ive ordered 1 of these for my car.
No the cd player needs to come out .
@ishanperusinghe yeah i know that, shame they dont do a loom adaptor so that you can still use it.
@@mattyobangervideos7844 you really need a cd player in 2023 .. you will be surprised how much you don’t miss it once you have new unit
Volume on 0 will not change on fiesta touch screen 9 inch - no sound what so ever ….. fiesta 2022 model ? Can you help
Please
Hey man, i had an aliexpress heaudnit installed in my 2013 Mazda 3 and what i noticed is that the unit started getting really really hot. It was a 5G, 8gb ram and 128gb storage unit so i assume that power caused it to get hot. However, there was the same unit with a cooling fan option and im considering getting it and returnijg the original. Is it normal for a headunit to get hot and is it safe for the cables and stuff behind the unit? Could it catch fire?
Unit should not get hot . Maybe warm to touch but not hot . It’s basicly a tablet . Need to see what’s getting hot . Is it screen . Or body of unit
Hello. I have a 2016/2017 dord fiesta mk7. What canbox setup did you use if I may know?
I would try Ford transit or simple. But you can try all variation listed . Come back with which works
I also bought similar headunit, but frame didn't fit. mine is 2017 fiesta model in USA. the frame panel hooks in the back are at different slot that originial one. and also at the front side my original radio frame has one hook at the middle but this one has 2 hooks on the side and middle one is very smaller than the original. So seems like this kit is not universal to 2017 models as advertised by sellers.
Ok but is the shape the same . As in if you made the holes would it still be flush as you only need holes for tree clips
@ishanperusinghe possible for the back clips. there is the metal piece at the place where the front clips are supposed to go. Only way would be cutting the front clips and attaching magnetic tape on the frame. I haven't tried that one and don't know how much secure that would be.
Hi, we have a fiesta mk7 2011 but we dont seem to have two plugs at the back of the stereo
If you send pic of stereo to seller they should be able to help
Hello friend!
My ford fiesta mk7 has tire pressure sensors and the quadrant errors appear on the small viro of the original radio. If I switch to this radio, will all this continue to appear or will I lose functions?
Thanks for the video.
There was a menu to show tyre pressure etc not sure if it’s covered in video , door open etc . Not sure if this works or not as I don’t have and I turned off settings to pop ups . It’s all about selecting right canbus in hidden menu as signal is decoded and outputted to stereo . The tyre pressure should also show on driver dash if not showing on stereo . Not sure about quadrant error . Ask manufacturer send screenshots to help. This stereo isn’t perfect there will be some give and take on oem functionality
@@ishanperusinghe Thanks :)
Did you get the systeem en do the tpms sensors work?
Just curious how it affects the controls on the center console eg does the directional controls and volume still work
Yeah they still work . Not very useful though since it’s touch screen and you can do most of volume controls from steering controls
@@ishanperusinghe nice thanks. And yeah it's just I have a weird thing for redundant controls. I hate something being there that doesn't work even if it's not needed
@@zeno9580 sure I will need to ask my mate to test them out again as I can’t remember if they all worked . Volume did and front and back buttons on tracks
Any update for the center console controls please
Any idea what canbus I need to use for a mk7 fiesta 2009? The fiesta one doesn’t let me use the steering buttons
@@MAR23-m8y its comments but its its either transit or simple
@@MAR23-m8y man did you actually watch the video 😂
@@ishanperusinghe Its a lot to digest 😭😭😂😂 first time working with anything electric, appreciate the help 🙏
Does it show parking sensors? when u go in to reverse (mine doesnt have the camera)
@@emilchristensen5822 mine didn’t have sensors . But it should do if you have option . Best ask seller
Hi,
How do i get the normal radio buttons working again? Steering wheel works fine.
I looked at canbus settings, none of them make the normal radio panel work. I'm getting open door message now, so thats fine. But my mirrors wont close automaticly while locking the car. I cant find that setting anywhere.
Wich antenna did you use?
Thanks for a reply!
Hi mine worked with simple transit I believe. For antenna the link is In description . Was stereo from same seller if so I believe you can update the canbus with new protocols if connected to internet . Also check the hidden menu items and car setting for folding mirrors . My friends didn’t have folding mirrors
@@ishanperusinghe thanks for your reply. Where is the hidden menu? Do you mean developer menu? Factory menu i can find. No problem. Tried different Fiesta settings in can bus menu. Gonna try transit
@@ishanperusinghe do you also know how to set the microphone? The extra one is connected, but it keeps using the bad one inside the headunit.
@@Rickpeugeot106 it should be in the hidden menu area . Make sure unit software is up to date
@@ishanperusinghe yes, but what hidden menu do you mean? The unit is running android 12
How to access the setting menu? I mean if we want to turn off traction control, error check, paralel parking, etc
Should be in video
Hi just fitted TS7 head unit and my mileage etc (screen between rev and speedo) are. Ow in Kilometres can you help, I’ve gone into Theme and places into miles but this has not affected the mileage etc
Have you read the comments few people mentioned this . Solution varies from low battery to changing car info app. If none work then you can try change canbus config to another Ford car . That’s the only thing that can affect the millage possibly. If that doesn’t work ask manufacturer. Report back if you fix so solution can help others
Unici problema che io sto avendo e con i comandi al volante consihli ?
Could not get stering wheel buttons to work and shows wrong door open what settings did you set under fateey
I think there is option in hidden menu for door left or right . I turned it off completely as it’s annoying . I set canbus to mine Ford simple or try transit
My 09 ford fiesta mk7 doesn’t have Bluetooth built in, can I still get one of these and use carplay?
@@MAR23-m8y yes because i replaces the current system completely. And has its own Bluetooth and CarPlay built in
@@ishanperusinghe ohh okay thanks
I installed the same stereo into my Ford fiesta 2013, the only issue I encountered was that the odometer was changed to km/hr instead of mph. Any idea how I could get this to change back or what I could do in settings. I couldn’t find anything for the units on settings…
Couple of things . If the stereo caused the change then make sure you have all software updates done to unit and in factory menu there isn’t something set to Km/hr . Also the stereo really shouldn’t affect odometer setting as it’s a separate ecu . Check this article
www.vehiclehistory.com/questions/how-do-i-change-the-odometer-from-kilometers-to-miles-on-the-ford-fiesta-128129
Did you fix
I had the same issue, my car battery died when spending a while to configure settings, after jump start, dashboard units all changed to km from miles
Hi have a look at my comment shows how I changed back to.mph hope helps
Did you manage to change the odometer from km to miles?
It’s in setting the change . Lots of people in comments have had issue . Answer in comments
Did anyone find equaliser mask no difference play amazon music?
It changed my car to kmh from mph and idea how to change back and my mirrors don't close when locked what factory setting u use I selected basic fiesta 2011
Check comments below for kmh to mph fix . I don’t have folding mirrors so if you find fix then please post back . Might be usefull to others.
I’m have just had This unit or very similar android- can’t get my steering wheel buttons to work and it seems to have an impact on my AC. Do you have any advice?
For steering wheel control . Connect unit to internet and go to factory setting as change car brand and canbus . It’s around 20.04 min in video . For fiesta it should be set to simple canbus . This may fix ac controls also . You can disable pop ups on screen via on the setting also
@@ishanperusinghe it’s currently set at fiesta rise? Is it this I need to change?
@@mikeymcgrath3337 I’m not a expert but you could try setting to fiesta / Ford transit and set canbus to simple . Please report back for others if it worked or not
@@ishanperusinghe I have tried setting it to them. Other providers that are not rise and it doesn’t seem to make any difference in the settings but I might try setting it to a different Ford car and see what happens. I will report back here to support anyone else I get to the unit
@@mikeymcgrath3337 any luck fixing this? I just got my radio connected, it works, but the center column doesn't respond, doesn't even light up. The same with steering wheel controls. But the radio detects that the door is open. Strange.
Hi Ish, sorry to trouble you again, i have seen another screen similar to the one i have just sent back, only problem it is on Android 10, cab you update the system to Android 12 ?
Many thanks
No you cannot upgrade. I can only advise on the one I purchased . Each manufacturer customises android version slightly differently. I would go for android 11 and above personally. More than unit seller is more important incase of issue
Only way to upgrade is via custom rom but would not advice unless you understand how to do correctly and also you won’t get manufacture support once you do .
@@ishanperusinghe Brilliant, thanks very much, best stay away from that one then, will look for Android 11 unit. Cheers
@@1Yerffej speak to seller I have recommended . He will be able to advise on unit .
Hi just fitted a junsun android unit two problems if you know the solution the locking on my key has stopped working and how do you get the artist or album pictures when playing music I use Amazon music it comes up on my phone thanks
Keys stopped working shouldn’t be issue with stereo . No key stuff goes through stereo . You might have pulled out an aerial or blown a fuse. For album art it’s down to factory player if it doesn’t support album art then you don’t have . Also can’t comment on other stereos only one I installed
@@ishanperusinghe thanks another dumb question just noticed that miles remaining in the tank on the smallscree
Miles on small screen by steering wheel now say kph have tried several menus how do I change it to miles thanks very stressful day trying to get the centre panel back
Sorry can’t help on km / miles . See comments below somone also had same issue . I didn’t have on my unit . Yours seems to a different brand
Can you tell me where I can order the Android stereo with the airbag button
I’m not sure I get u . All links in description
I can not use the buttons on the wheel. Do you know how to fix this?
You have wrong canbus selected . See video
How can I connect volum controls to my steering controls ?. it's just not working for me
Did you get same stereo ? If so you need to go into the factory menu and select correct canbus . It’s should be same as mine or simple . Also before doing this please connect unit to internet via WiFi. Check 20.04 in video
Just checked my unit it's a B radio Sony would attach image if I could. Do you have to remove Lcd screen
Yeah did you watch the whole video ?
@@ishanperusinghe sorry I must missed it yeah I watched video loads I'm I missing bit where you take lcd screen out
@@rickyaustin9104 maybe not fully covered but it’s two screws either side or screen to remove
Can you turn traction control on and off with this unit?
I don’t think so . It only allows for ac controls and door open sensors from what I could see . It’s also very annoying seeing these pop ups so I disabled in menu
Which cable does the steering controls?
It’s done via canbus decoder red box that comes with stereo
Do you still have the option for ford sync?
Not sure what you mean . It replace the original stereo completely. The whole factory cd unit is replaced/ bypassed . It will work with the cars canbus eg you can have a graphic come up saying door is open etc . But I turned off .other oem features like parking cameras Etc should be supported as per sellers page .
I’ve found the EQ settings and “no reverse camera” setting fine whilst using the device, but it doesn’t save the settings to apple CarPlay/Tlink so I get a blank screen when I put it in reverse and my audio sounds weak using CarPlay. Any suggestions?? Many thanks!! This is a very well put together video
Have you tried the hidden menu . You can adjust volume controls in there I belive. It’s in the factory setting menu and requires code . If same as mine will be same code but contact manufacturer if different. Have you put tlink as nav options if so don’t use as a nav in system settings
Any idea how to get my fold out mirrors working again I’m struggling
Sorry I don’t know . Shouldn’t be connected to stereo install though
So what’s happened it’s because I’ve pulled the battery before I installed so there was no way I’d blow anything so I’m thinking I need to change the settings for the car in order for it to allow me to then set my mirrors back to folding in and out when locked or unlocked I’ll try and figure it out and let you know 👍
@@ianmcbride1179 Hi Ian was you able to solve this issue?
@@JD-29 no I didn’t sorry tried everything they fold in using the button inside however not when I lock the car
@@ianmcbride1179 I have contacted manufacturer they said they may have to send an update to the device for it to work
Can you turn off the traction controll on this screen ?
No my car didn’t have that option . Best to speak to manufacture if there isn’t a physical button to turn off in you car
Fitted mine yesterday but the steering wheel controls don't work at all 😥
Check canbus setting . It’s in video
@@ishanperusinghe I've got the same car in this video and I tried setting it to a Fiesta 09-13 and even the mondeo before 2013 and both times I don'y get a response from the steering wheel controls. Also non of the controls on my store work too aparat from the hazard lights and the lock/unlock button
@@jodrin9 try Ford transit simple . If not then the Redbox ( canbus decoder ) maybe faulty . Make sure u picking the correct brand also of canbus. Was the steering remote working before . Mine wasn’t had to take apart and clean as the Ford fiesta steering controls contacts get dirty
they didn’t sent me the “A” set of cables, now i can’t fit it, what to do?
Double check as B is an extension of A cables . Eg one extra from memory. Message seller with pictures . You can also try posting some pics here of your cable. www.fordownersclub.com/forums/topic/139648-android-touch-screen-stereo-with-carplay-android-auto-dab-dsp-and-reverse-cam-install-review/#comment-965174 and I will see if I can help
Does it restrict your view when driving is it anoying atall?
It is big and a a little distracting at first but you will get used to it
Got one myself but when I pug it in it go's from miles to km do you no why
See comments below . The the car info app you can set in there
Nice video ❤
Will this work on a 2019 model?
Does the screen affect your fission while driving
No not really . My friend was worried about the same but it’s fine . It covers the bonnet area more
@@ishanperusinghe thank you
Does it block your view while driving ? Because it seems quite big
Answered below . It’s hard to say due to your height and driving position . I would say it covers more Bonet in my vision and 5,8. It’s probably a few inches taller than the sat nav Ford sync
@@ishanperusinghe so overall it doesn’t affect your driving am I right?
@@leejinglim5893 it’s my friends car like I said in video . It does take some time to get used to but overall he said it’s fine .
I can't get the radio buttons to work with it any ideas
@@Luuuccassss that’s canbus setting related . Try a different canbus profile
@@ishanperusinghe Were would i find that i go to the cambus settings and it says no device detected.
@@Luuuccassss it’s in video on how to change canbus decoder setting . If it’s from a different seller you will need to ask
@@ishanperusinghe sorry for so many questions but after I installed it there is like no bass in my car
@@Luuuccassss is it just factory system . Have you tried the obvious stuff live changing eq settings . Also is unit from same seller as mine . As mine has dsp
So it has no usb option? What if i want to plug in my usb
Did you watch video . It has 2 usb connections and ability to connect to existing extension in car .
How do I change car model using wifi without a 4g SIM card.
Hotspot your phone ? And connect via stereo wifi to phone
Wehre is it with PDC?
It should support factory pdc if correct canbus selected . I don’t have so can’t check
Do you install for public
No sorry
Hello mate . Can I pay you to do this for me?
How much will it cost me in total
@@vtube742 sorry mate this is a do it yourself job
Dose the original cd player work
No you take it out
@@ishanperusinghe do you think there might be one that dose
Na man . They all uses the audio connections from main harness . Also it’s 2023 so is there a need for cd player . Once you make swap to ou won’t car about cds anymore put all your music on flash drive
My steering control is not responding
@@tahmut5456 see comments
Hi Great video I been looking unit for long time. Would you have the email address so I can email them some questions and photos. I have 2011 titanium with Sony unit and cruise control on steering like to check all works
Your best bet is email seller . Im not a distributor of the unit . I just put reviews to help others . Cruise will be uneffected and I believe the Sony unit is also compatible. Some one in comments has already said
@@ishanperusinghe hi mate thank you I followed likes on your video but I can't find email of the seller, can you help
@@rickyaustin9104 if you go to aliexpress link for stereo u can message seller . It’s like eBay contact seller. No direct email it’s via aliexpress platform
@Ish modz thank you keep up the great videos ill give a go I could not find it anywhere try again 2mor
@@rickyaustin9104 if you download the app , log in and open link . You will see ‘message
‘ at the bottom of page . Remember they are in China timezone so if you in uk . Message today get reply in morning . When ordering remember to pay little extra so you don’t get customs charge. Also check comments bellow for convo with ‘ddrt’ he replaced a Sony unit
Thanks for this. How can I contact you to send you a video of the problem I have? Basically everything is plugged in but the CarPlay won’t turn on, but it’s charging, the USB works, and when you turn on the car you’ll see the screen coming on then goes off and won’t do anything. I have few videos. Any idea what can it be ?
Link to video
th-cam.com/video/BHvO6AKIeE4/w-d-xo.html
You can upload the video and put link here . But the carplay works via the units Bluetooth . Once it’s connected to Bluetooth you will get message on phone to enable carplay. Remember I can’t only comment on this unit. Also make sure unit is up to date
Digging deep looks like it won’t turn on if red and yellow wire are not connected together, is this a good idea ? To connecte these two cables?
@@emmanuelrusaka the harness should be plug and play . Try disconnecting the canbus decoder ( Redbox ) and see if screen stays on . If it does then canbus decoder box faulty . Is unit from same seller as mine . Next will be to speak to selller
I was hoping for a quick and ez thing but does is allot for a guy who has zero knowledge about these things
It’s not that hers really . Everything is plug and play . My video is long because I’m explaining it all .
I am more confused now after watching this video
What’s confusing? It’s all plug and play
I received some sort of mic with a aux cable attached, any idea where that goes?
It’s in video . It’s mic for unit