Thanks sir for the detail description. Can u please upload one video regarding it's internal components like Loop cards and it's connection and also about how to program a device in Est 3x.
You need to know the address of the module monitoring the waterflow. There is no easy way to determine that unless you have good as built drawings. If you can locate the address then you go to main menu, disable, device, and enter the address P0x C0x D0xxx and then the password which should be 2222
In your next video, would you be able to demonstrate how to use the "control knob" (identified @ 1:28) as a volume control for system horn circuits? Inquiring minds need to know!
If the trouble is still present use the center nob to select it, press the nob, select details, and repost the error code displayed. Should look something like this, 01 01 0XXX. I'll try to help you sort it out.
It is not possible to repair a ground fault LED in the field. this requires returning to Edwards. How old is the system?Are you the end user or the installer?To simulate a ground fault, make a jumper and touch between one of your power limited circuits, such as the SLC + and the ground lug inside the cabinet.
Yes, in the programming menu there is an option to reset panel history. I would suggest not doing it however, there can be a lot of valuable information saved in the panel history and not many reasons to clear it.
Very helpful. Is it possible to initiate the DRILL function on a specific floor, as opposed to the entire system?
Thanks sir for the detail description. Can u please upload one video regarding it's internal components like Loop cards and it's connection and also about how to program a device in Est 3x.
Hello, thanks for the video. Do you have any information on how we can print hard copy reports of 'troubles'
A printer or computer may be connected to the panel through the RS232 port. It's a bit of a process, but is described in the manual
If I press acknowledge button will the alarm be silenced
Hmmm ran into this panel today..first time seeing it...how do you disable to keep the fire alarm from going off while testing sprinkler..thanks
You need to know the address of the module monitoring the waterflow. There is no easy way to determine that unless you have good as built drawings.
If you can locate the address then you go to main menu, disable, device, and enter the address P0x C0x D0xxx and then the password which should be 2222
how should i trouble shoot data card mismatch trouble in est 3x?plz gv m sm suggestion
I need to test a building with this panel, how can I disable the indicators devices on this panel?
Does it needs dongle to program
Est3x showing map mismatch loop-1 ,how is rectify this compliant please replay....
Hi, I'm getting alarm 'unprogrammed device data card2' could you tell what is the exact issue.
This video is very helpful ,thaks sir
I had a problem, there is a BATTERY PROBLEM
And I couldn’t Acknowledge it !
Can you help to fix this issue?
Can you upload Installation video of this panel also smoke connection?
Good morning what is the charging voltage 3x panel Siga PPS
When new panel installed that time display showing CPU fault how to rectify the problem
Like my Hotel System , Staff security and Engineering must known system to work .
In your next video, would you be able to demonstrate how to use the "control knob" (identified @ 1:28) as a volume control for system horn circuits? Inquiring minds need to know!
Not possible. Horn strobe volume is set at the device. Usually hi-med-low. Speaker strobe volume is set via a wattage tap.
Ryan is correct, code does not allow for dynamic volume adjustment.
GOOD EVENING, DO YOU KNOW TO REPORT THAT FAILURE IS THAT "Card 01, Wired Lasso?
That does not sound familiar. Are you certain that is the correct language?
If the trouble is still present use the center nob to select it, press the nob, select details, and repost the error code displayed. Should look something like this, 01 01 0XXX. I'll try to help you sort it out.
Sir its posible to make device address on the panel? I mean can edit the device location thru panel itself?
sir how to do plz explain
Give me link for programming software for est adwards fire alarm.
I would love to have this panel to my facp collection...haha
How do you fix a ground fault indicator light that does not work? How to simulate a ground fault?
It is not possible to repair a ground fault LED in the field. this requires returning to Edwards. How old is the system?Are you the end user or the installer?To simulate a ground fault, make a jumper and touch between one of your power limited circuits, such as the SLC + and the ground lug inside the cabinet.
Kindly support, How to fix 'map fault DataCard1?
Can alarm history be cleared?
Yes, in the programming menu there is an option to reset panel history. I would suggest not doing it however, there can be a lot of valuable information saved in the panel history and not many reasons to clear it.
Sir i want est 3 software key
Beep , beep beep how disable alarm system . How disable alarm system I'm tired press silent mode but alarm keep on beep , beep after few minutes.
I'm trying to locate a pull station. is there a list I can pull from the system?