Soo incredible..👏👏 I love this one.. But bro can u go for some Arduino based projects or arduino + electronic projects.. that would be great👍...this type of project is also very cool ....keep going.. Can u tell where do u get these projects Circuiting????
Hi, I now build it and double-double-checked the circuit, also checked to output signal with my Scope, The servo turns clockwise like it should, but ccw only very slow and is humming. It is a cheap chinese "AZ delivery" piece of junk, my nephiew ordered. I am sure, that it is faulty. But want to make sure, the signals are correct. I used my Scope to check the output signals. The signals are clear and stable. Here I have 68.5 hz and ~375.5 hz for the other direction. (this depends the resistor values and their tolerances) That looks correct? Thanks! ;)
For all with the same issiue, have solved it now. Replace the 2,2kOhm with a 10kOhm resistor, and either replace the 82kOhm with a 58 Ohm or instead of 82 kOhm resistor solder 68 kOhm resistor to pin 6 of NE555 to the left switch (not on series with the 10 kOhm (2,2 kOhm) resistor.
Merci beaucoup 🇨🇵😃👍❤️
It would be more interesting, if you could explain the circuit and its funktion. I believe you, that you can solder your parts together.
awasome....i like these kind of projects
Super 🤩❤️
Nice work
Amazing
Now u are making osm projects
How can we slow down the rotation of the servo motor when we press the buttons???
Soo incredible..👏👏
I love this one..
But bro can u go for some Arduino based projects or arduino + electronic projects.. that would be great👍...this type of project is also very cool ....keep going..
Can u tell where do u get these projects Circuiting????
I will open a new channel soon for Arduino related contents and more
Most of my projects that I make are based on my experience but when I have no ideas what to make next, then I go to google and search related circuit.
@@estechknowledge
OKAY..
Thats a good idea ..
This is amazing
This is good one .. 👍
Super useful, thanks!
I LOVE IT !!!
hello friend, how can i control the servo spinning speed?
Good work
Ise simple push switch se on off kar sakte kya
how
How precise is the repeatability on this circuit? Does the servo stop at the Same position Every time?
Amazing
how to control servo motor using op amp and ne555?
Bro why are the other pins used for (other than usb)
I used USB to power the circuit.
You can use any 5V DC power supply.
@@estechknowledge iam asking about the extra 3 pins
Which extra 3 pin?
@@eswarelectronics4205 the three header pins?
They're used for the servo i believe
Good
keren 👍
I made the circuit only one button ( one position) moving. another button pressed servo motor not rotating. How resolve this issue.
same even with two buttons
same
👍
Where get 555ic?
Good good good
0:44 - is C1 a "103" or a "104" ? In schematic it is a "103" - but in video a "104" ..
I have used 104 capacitor
@@estechknowledge thanks
Hi, I now build it and double-double-checked the circuit, also checked to output signal with my Scope,
The servo turns clockwise like it should, but ccw only very slow and is humming.
It is a cheap chinese "AZ delivery" piece of junk, my nephiew ordered. I am sure, that it is faulty. But want to make sure, the signals are correct.
I used my Scope to check the output signals. The signals are clear and stable. Here I have 68.5 hz and ~375.5 hz for the other direction. (this depends the resistor values and their tolerances)
That looks correct?
Thanks! ;)
For all with the same issiue, have solved it now.
Replace the 2,2kOhm with a 10kOhm resistor, and either replace the 82kOhm with a 58 Ohm or instead of 82 kOhm resistor solder 68 kOhm resistor to pin 6 of NE555 to the left switch (not on series with the 10 kOhm (2,2 kOhm) resistor.
how to make it rotate non stop? I want to use this servo motor at the base of small Christmas tree.
use a simple dc motor
Wow
Where u r place
India
Try to build one for 5 pin servos
Don't have 5pin servo 😅
@@estechknowledge its Okay. When you get one you should try to build one
reverse button is not working
Sir pls Upload Knight Rider video Pls Sir
If you are asking for this - th-cam.com/video/NzO8vyT5cz0/w-d-xo.html
music so tipical :(((
Can we use 4v supply
Offcourse
it says 33kOhm resistor but the colour is for 3.3kOhm
Mana gbr rangkaiannya?
for the resistor how many watts?
0.25w
the 4.7 Kohm and 2.2 Kohm are also 0.25 watts?
why is the resistor color different?
Sir draw the circuit diagrams
Available in the video description
it is foolish to show the project without a diagram. you want us to see that you are a good welder?incredible