You probably dont care but if you guys are stoned like me during the covid times you can watch pretty much all the latest movies and series on instaflixxer. Been watching with my girlfriend these days :)
5, I’ve commented before that you’re inspirational bud, mate,seriously you are...ultimate DIY mantra...”there is no right or wrong way...just the way you know” To add to your comment “until you know better” we all start somewhere, the journey is just as important as the destination!
You deserve FIVE MILLION SUBSCRIBERS! the effort you put into your builds and videos on a regular basis is awesome. The qualtiy of every video is so great and more enjoyable than TV shows. Looking forward to the next episode to see what this 70s paint is going to look like
“Five” ... I can’t wait to see more of this. BUILT is my new favorite channel. Has been for a couple months now but just had to say it. Love it all man.
Took a Five to tune in to the Corolla build an man oh man is it looking good cant wait to see the final build......all the way from the Caribbean island of Trinidad bro so good work
Hey man I like how you improvised and created your own stud welder, great idea. Definitely make that investment when you can, it’ll make life a lot easier for you. Also, after you apply your filler, before it fully hardens, while it’s still a little soft use a “cheese grater” to do the heavy shaping work. Get it in the neighborhood of where you want it and then let it fully harden the rest of the way. Then use 80 grit on either a DA or a pneumatic straight line sander to further refine the shape, then sand with 180 using those same tools and finish with a quick block with 180 by hand. After that you’re ready for high build 2k primer. Apply a guide coat and block the primer by hand with 320. You can finish it out with 320 on a DA if you’re going to use a sealer primer before your basecoat, otherwise finish it with 600. To speed up sanding your panels and to work “smarter not harder”, get a DA and outfit it with a 3m hookit pad and a foam interface pad. You can use that to quickly prep your panels for paint or primer. Lastly, throw a few bucks into your paint booth room. Clear it out, clean the floor, paint the walls and ceiling bright white and get yourself a bunch of 8ft led lights from Home Depot.
A couple pointers for ya. Dont use bodyfill to fill in holes. It shrinks eventually. Bf is only good for scratches and minor dents. Short strand fiberglass is what you have to use. Also use a guidecoat whenever doing bodywork and qhen sanding primer. Just lightly dust paint on so you will be able to find high n low spots. You will thank me in the long run.been watchin this build since the beginning. Looking good
primer is the top of the mountain in most builds!! once you are done with primer the rest is like walking down a hill, it should be a breeze after this, and with you loving paint it should be a good time. also 5!
Rural king has 4' led shop lights and you can link 6 of them together in a series. I have them all through my garage and the lighting is awesome. They are reasonably cheap as well.
This must have been at least FIVE times the work it looked like! Love the channel dude really giving me enthusiasm to do my own projects and learn more!
This build is awesome!! It’s be cool to see you pick up an Volvo and build that! I’d love to see a budget Volvo. Keep up the great work!! High FIVE brother!
Although your body work may not be a five star the time and effort you put into your builds and videos is five out of five stars ⭐️ ⭐️⭐️⭐️⭐️ and you can always say you put your blood 🩸 sweat💧 and tears 😭 into your builds
I can think of five reasons why I would buy a project car like this Corolla rather than a brand new Porsche. Great content and good job keeping your son educated about the art of wrenching!
Look up Bell & Howell Tri Burst LED lights. They screw in like a regular bulb and provide something like 4000 lumens. They bring three panels you can move and point. I have one in my garage and boy is it bright. They have them at the Home Depot too!
Hey Caleb you doing great mate. Can wait more then five days to see you progress on that thing and find out what happens and what colour you going to use on it. Late 70's there was some metallic colours out there, I think that it would look really good with a king of candy brown metallic colour, but over all it will look great, after all it is a budget project and you have to keep thing on the low low. Take care gratings fon the UK.
Body work and sanding can be enjoyable if you have the proper tools and equipment to do the labor for you. Doing stuff by hand, especially in that Alabama heat can’t be easy. Like anything else, there’s a process to body work and paint. Once you get it down it’s a lot easier. I love it.
5ever mate. It looks soo good. Body work is one of those things that you can spend weeks on but no matter what it'll look better than what you started with
Costco has cheap LED shop light on sale right now. Well at least in my area of California they do. They are amazing lights that beat the fluorescent lighting all day. They work and look just like the fluorescent tube lights so you wouldn’t skip a beat.
Vermont has “energy efficient Vermont” which is a real low cost on LED lighting, I can source whole sale LED lighting through my old boss if your able to install it yourself. Lifting is very minimal amperage, you could put at least 8 led fixtures on your existing lighting circuit.
Definitely get 4’ LED shop lights and all the big box stores sell cheaper models. For a small shop/garage even some of the 3000 lumen versions will give you plenty of light at low cost. Watch for a Harbor Freight sale/coupon for their LED shop lights. I have several and they work great for about $20 each. Also if you have a garage ceiling (can’t remember) paint it white for a bunch of reflective power. And paint your garage walls white at least from half way up the wall to the ceiling. It’s a cheap way to really help your shop lighting.
Such a cool wagon. My mate's Mum had one when I was a teenager twenty plus years ago. Loved it then and love what you are doing to this one. Fist bump, woops, I mean high FIVE
Look up on Amazon the led lights for garages there is the one that are like bars which I have work awesome and you can link a bunch together on the ceiling and wall. My brother has the space looking ones that go into a light socket. He loves them too not as bright
Love your videos I hate all the dust from sanding I got wet and dry sand paper and used a spray bottle to minimize the dust even when using the electric disc sander
Hey, so far, the Corolla is a 5 - I'm sure it'll be another 5 by the time its done. Not sure if you can find these for lighting up your shop - or something similar in AL's COSTCOS . They are LED, you can connect one to a regular plug and link up to six to each other. Koda 116 cm (45.6 in.) LED Linkable Shop Light with Motion Sensor and Remote Item 1600034 $ 47.99
It would be kinda cheap but easy and fast to set up get rgb leds or even just bright white ones but get enough to cover the whole outside and two center lines providing more light to the center I didn’t put any up in a shop but I use them in my room instead of a normal light and it provides great light quality just an idea tho love the videos and keep up the great content the Corolla looks great too love that thing 👍🏻
At menards there's 10k lights not really shop light but I put 10 in a shop and it lit it all up you would only need 4 in a garage they're around 30 bucks a piece and led.
Sorry if this has already been mentioned and I know ur not driving the car yet but looks like your front tyres need swapping from one side of the vehicle to the other as they look like a rotational tread pattern which needs to face a certain way otherwise they will either melt in the heat of draw water into the tread instead of dispersing it out of the tyre tread. I may be wrong be worth checking it out though
I'm doing the same exact thing right now and yes sanding down a entire vehicle is time consuming, this is my first time doing this kinda thing but its enjoyable 💢FIVE💢
I completely lit up my garage with Sunco Lighting LED ceiling light fixtures. Relatively cheap, plug into outlets, and can Daisy chain into each other. They sell on eBay and Amazon but it's cheaper on eBay. I bought 4 for a 2 car garage and everything is completely lit now. Almost too bright.
When it comes to lighting don't use studio lights because it's not gonna work of you can us the 20v or 40v LED lights that you normally put outside, They have great brightness I am using the them now
4 foot led shop lights at harbor freight.. 29.95 each and they are brighter than my 8 foot fluorescents.. also.. I have all the flanges to build custom headers for your 2tc..
I just picked up a 1979 Toyota Corona FIVE door Liftback LE! Your videos are motivating man, keep up the great work! P.S. Which fender flares are you using? Any specific ones you recommend? Thanks again!
The look he had when you backed out. Priceless. FIVE 😊
You probably dont care but if you guys are stoned like me during the covid times you can watch pretty much all the latest movies and series on instaflixxer. Been watching with my girlfriend these days :)
@Harlan Rohan definitely, I've been using instaflixxer for months myself :)
Your sons face and his expressions. The zoom in's. Fokin gold. Five. 👌🤣
Bodywork is something difficult, you will get better at it every time you do it.
5, I’ve commented before that you’re inspirational bud, mate,seriously you are...ultimate DIY mantra...”there is no right or wrong way...just the way you know” To add to your comment “until you know better” we all start somewhere, the journey is just as important as the destination!
You deserve FIVE MILLION SUBSCRIBERS! the effort you put into your builds and videos on a regular basis is awesome. The qualtiy of every video is so great and more enjoyable than TV shows. Looking forward to the next episode to see what this 70s paint is going to look like
“Five” ... I can’t wait to see more of this. BUILT is my new favorite channel. Has been for a couple months now but just had to say it.
Love it all man.
I love these corollas. Build is coming along nice, FIVE.
Took a Five to tune in to the Corolla build an man oh man is it looking good cant wait to see the final build......all the way from the Caribbean island of Trinidad bro so good work
Your son makes me laugh😂! I always watch every video to the end. FIVE
Hey man I like how you improvised and created your own stud welder, great idea. Definitely make that investment when you can, it’ll make life a lot easier for you. Also, after you apply your filler, before it fully hardens, while it’s still a little soft use a “cheese grater” to do the heavy shaping work. Get it in the neighborhood of where you want it and then let it fully harden the rest of the way. Then use 80 grit on either a DA or a pneumatic straight line sander to further refine the shape, then sand with 180 using those same tools and finish with a quick block with 180 by hand. After that you’re ready for high build 2k primer. Apply a guide coat and block the primer by hand with 320. You can finish it out with 320 on a DA if you’re going to use a sealer primer before your basecoat, otherwise finish it with 600. To speed up sanding your panels and to work “smarter not harder”, get a DA and outfit it with a 3m hookit pad and a foam interface pad. You can use that to quickly prep your panels for paint or primer. Lastly, throw a few bucks into your paint booth room. Clear it out, clean the floor, paint the walls and ceiling bright white and get yourself a bunch of 8ft led lights from Home Depot.
A couple pointers for ya. Dont use bodyfill to fill in holes. It shrinks eventually. Bf is only good for scratches and minor dents. Short strand fiberglass is what you have to use. Also use a guidecoat whenever doing bodywork and qhen sanding primer. Just lightly dust paint on so you will be able to find high n low spots. You will thank me in the long run.been watchin this build since the beginning. Looking good
primer is the top of the mountain in most builds!! once you are done with primer the rest is like walking down a hill, it should be a breeze after this, and with you loving paint it should be a good time. also 5!
Man I'm loving this FIVE door Corolla! Looks super awesome, cant wait for the paint
Dawg, you’re incredible. Keep pushing. Definitely going to start mentally dividing my work.
Rural king has 4' led shop lights and you can link 6 of them together in a series. I have them all through my garage and the lighting is awesome. They are reasonably cheap as well.
This must have been at least FIVE times the work it looked like! Love the channel dude really giving me enthusiasm to do my own projects and learn more!
Frickin’ Insane Vehicle Enhacement 🇸🇪
FIVE awesome builds, but this FIVE door corolla is my favorite so far. Blessing from Hawaii man. Stay safe up there. 🤙🤙
My dad had one of those corolla wagons when I was FIVE years old
Enjoying the build episode FIVE was my favorite
Almost 250k Bru 300 k coming up keep it up been with you for almost a year
This build is awesome!! It’s be cool to see you pick up an Volvo and build that! I’d love to see a budget Volvo. Keep up the great work!! High FIVE brother!
Love the look in he’s face and as you always say man you learn but doing it yaself you will eventually get better at body work
This is FIFTH real car project from this channel i LOVE your content keep up the good work
This build is so good I intend to watch it FIVE times. Cant wait to see the next FIVE builds.
Loving the build. Keen to see the new colour. Five!
Although your body work may not be a five star the time and effort you put into your builds and videos is five out of five stars ⭐️ ⭐️⭐️⭐️⭐️ and you can always say you put your blood 🩸 sweat💧 and tears 😭 into your builds
I can think of five reasons why I would buy a project car like this Corolla rather than a brand new Porsche. Great content and good job keeping your son educated about the art of wrenching!
5.Can't wait to see the paint
Look up Bell & Howell Tri Burst LED lights. They screw in like a regular bulb and provide something like 4000 lumens. They bring three panels you can move and point. I have one in my garage and boy is it bright. They have them at the Home Depot too!
I love this build, been here since you started working on the Mr2. Number Five my man!
Five, love the wagon. Easily my favorite car of the whole channel
Great thinking on the diy dent puller👍
High Five!
Get some photographing lights and just love them around with you. Good lighting for the camera. Good lighting for the work, and you can adjust them.
Move* not love. Hahaha.
Hey Caleb you doing great mate. Can wait more then five days to see you progress on that thing and find out what happens and what colour you going to use on it. Late 70's there was some metallic colours out there, I think that it would look really good with a king of candy brown metallic colour, but over all it will look great, after all it is a budget project and you have to keep thing on the low low. Take care gratings fon the UK.
Awesome video! I'm gonna go watch it FIVE more times just so I don't miss anything.
Im loving this build. I had a ke70 few yrs bak over here in aus... best cars ever lol... plz do it candy apple brown that would look dope.... FIVE
Body work and sanding can be enjoyable if you have the proper tools and equipment to do the labor for you. Doing stuff by hand, especially in that Alabama heat can’t be easy. Like anything else, there’s a process to body work and paint. Once you get it down it’s a lot easier. I love it.
Just as you were talking about the color , I was thinking please don't say , metallic with pearl . Beautiful car can't wait for the paint 😍
That shot of your kids face cut with you backing the car up out of the paint booth into the yard had me cracking up
Oh yeah and my guess for the colour is orange
It's coming along so well man! Given me FIVE new ideas for my new Ae92 build
5ever mate. It looks soo good. Body work is one of those things that you can spend weeks on but no matter what it'll look better than what you started with
Five times better then i expected !
That CV axle video saved my life with my Sportwagon 💪🏻💪🏻
Cars coming along nice man. Love the process and that you enjoy it. Keep it coming and stay motivated! Thanks for the work on the vids man
🤣😂😂🤣😂🤣 your shorty funny ass hell them eyes he gave when u was backing away had me "rofl" oh yeah five is it uh ok
Dude! I love the corolla! It is really turning out awesome
Costco has cheap LED shop light on sale right now. Well at least in my area of California they do. They are amazing lights that beat the fluorescent lighting all day. They work and look just like the fluorescent tube lights so you wouldn’t skip a beat.
Vermont has “energy efficient Vermont” which is a real low cost on LED lighting, I can source whole sale LED lighting through my old boss if your able to install it yourself.
Lifting is very minimal amperage, you could put at least 8 led fixtures on your existing lighting circuit.
Love your kids lol. Reminds me of my son at that age lol. Five 5. Keep up the good work.
Definitely get 4’ LED shop lights and all the big box stores sell cheaper models. For a small shop/garage even some of the 3000 lumen versions will give you plenty of light at low cost. Watch for a Harbor Freight sale/coupon for their LED shop lights. I have several and they work great for about $20 each. Also if you have a garage ceiling (can’t remember) paint it white for a bunch of reflective power. And paint your garage walls white at least from half way up the wall to the ceiling. It’s a cheap way to really help your shop lighting.
Such a cool wagon. My mate's Mum had one when I was a teenager twenty plus years ago. Loved it then and love what you are doing to this one. Fist bump, woops, I mean high FIVE
I give your builds 5 stars!!! Great content man
F I V E 🔥🔥🔥 Corolla is looking great!! 🙂
Look up on Amazon the led lights for garages there is the one that are like bars which I have work awesome and you can link a bunch together on the ceiling and wall. My brother has the space looking ones that go into a light socket. He loves them too not as bright
Love your videos I hate all the dust from sanding I got wet and dry sand paper and used a spray bottle to minimize the dust even when using the electric disc sander
Looking awesome can’t wait to see it finished
This is definitely one of top 5 cars i want.
This car is coming along fine, just want to high FIVE you!
Uhum (in my elbow)... social distancing
Hey, so far, the Corolla is a 5 - I'm sure it'll be another 5 by the time its done. Not sure if you can find these for lighting up your shop - or something similar in AL's COSTCOS . They are LED, you can connect one to a regular plug and link up to six to each other. Koda 116 cm (45.6 in.) LED Linkable Shop Light with Motion Sensor and Remote
Item 1600034
$ 47.99
It would be kinda cheap but easy and fast to set up get rgb leds or even just bright white ones but get enough to cover the whole outside and two center lines providing more light to the center I didn’t put any up in a shop but I use them in my room instead of a normal light and it provides great light quality just an idea tho love the videos and keep up the great content the Corolla looks great too love that thing 👍🏻
I love how rough, but awesome this build is. Keep it up.
Five.
Love the cars and the fact you do the work yourself.
Much respect to you 👏🏽🔥
Loving this build FIVE
5 series for the 1 day build? And is the 70s colour a bronze or burnt orange?
WOW! The progress is moving right along on this car, it'll be done in about FIVE weeks or so.
I want a Corolla like yours now,
Thanks
At menards there's 10k lights not really shop light but I put 10 in a shop and it lit it all up you would only need 4 in a garage they're around 30 bucks a piece and led.
keep up the good work a big high 5
Sorry if this has already been mentioned and I know ur not driving the car yet but looks like your front tyres need swapping from one side of the vehicle to the other as they look like a rotational tread pattern which needs to face a certain way otherwise they will either melt in the heat of draw water into the tread instead of dispersing it out of the tyre tread. I may be wrong be worth checking it out though
Ive been waiting literally all day🥵💯
Me too, I'm from Germany
I'm doing the same exact thing right now and yes sanding down a entire vehicle is time consuming, this is my first time doing this kinda thing but its enjoyable
💢FIVE💢
Haven't been loyal to the channel but I love your content bro.
Didn't take me FIVE secs to click on the vid🔥🔥🔥. Keep up the hard work and you inspire me man👍
The number 5!! 🔥🔥🔥🔥🔥🔥🔥
5. I love the build. Keep up the good work. Lol I really want a Corolla in those years.
Love your channel bro
I completely lit up my garage with Sunco Lighting LED ceiling light fixtures. Relatively cheap, plug into outlets, and can Daisy chain into each other. They sell on eBay and Amazon but it's cheaper on eBay. I bought 4 for a 2 car garage and everything is completely lit now. Almost too bright.
what over fenders are you using? link maybe?
Amazon's got cheap LEDs I just did my whole garage for 100.
Beat me too it!
That corolla is fire, FIVE
14:12
I thought it was music. Not enough bit
When i was 12 my father had one with a rotary engine on it 🔥
Car's coming along great. Would a station wagon be considered a five door?
Home Depot LED 4 foot stripe lights. Plug in. Cheap and long lasting. Add as many as you want even on the walls.
Gulf Orange or purple. I had a factory purple 2 door ke35 back in the 90s
I'm following you man I love your hard work.
Five times Ive watched you sand this thing.... still as good as the first.
19:10 soooooo cute
Ya he was like what the heck lol..
How can I buy that corolla. i Love that thing
When it comes to lighting don't use studio lights because it's not gonna work of you can us the 20v or 40v LED lights that you normally put outside, They have great brightness I am using the them now
4 foot led shop lights at harbor freight.. 29.95 each and they are brighter than my 8 foot fluorescents.. also.. I have all the flanges to build custom headers for your 2tc..
Harbor freight florescent shop lights like $50 and they work REALLY well
You managed to find a Renault 5 turbo in the states?
No puedo esperar para verla pintada !
I just picked up a 1979 Toyota Corona FIVE door Liftback LE! Your videos are motivating man, keep up the great work! P.S. Which fender flares are you using? Any specific ones you recommend? Thanks again!
Your son looks like Mark Wahlberg with that stare lol. Keep your chin up during this tedious part of the build ✌🏻🏴
High "FIVE" ma man. Great job.
Hold on so did the truck sell on ebay or the rolla?
Love that wagon! So awesome. 5 door haha