Lathe Tutorial P15 . Machining Tapers

[@mickymondo7463]

Offsetting the tailstock is the best method for singlepoint cutting of tapered threads, though getting the tailstock back into alignment can be tiresome, it's quicker if you mark things prior to moving it over, and don't forget, tailstock towards you gives thinner end at tailstock and tailstock away gives a thinner end at the chuck

[@jamesgui3733]

Yeah I can't get it to 0 out on my indicator. It's either too much or too little

[@johnsmith-wl8dp]

hi John, do you have details drawing for rasing the head on your mill please? i have one like yours and need to raise the head please.

[@doubleboost]

Email me please

[@paulp96275]

Thanks John excellent vid 👍👨🏻‍🏭

[@jamesgui3733]

Mate how are you zeroing it?

[@kentuckytrapper780]

Great info John, keep'um coming..👍

[@mrstan3997]

👍👍👍👍Good one John, keep 'em coming. Thanks for sharing

[@alltechinbox]

I have played so many pranks with a tub of blue. I am too old to be bothered now :-)

[@lensman5762]

Thanks for this. It certainly is a lot harder than it looks. A couple of years ago I managed to turn some Morse 0 taper for my Sherline lathe. It took a couple of goes but it worked in the end. The rigidity of the lathe is paramount here.

[@dermotkelly2971]

Good video john. Not many people know how to machine tapers.

[@davidforbes6250]

Soot from an appropriate flame worked well in my days on this kind of work.

[@sandraalves7308]

Thanks for the tip of the tailstock off set direction

[@graedonmunro1793]

good tutorial again John,, keep it coming

[@snarkynader9400]

I’m disgusted

[@doubleboost]

Why

[@robertmorrisby6495]

Thank you, very useful

[@edmac8212]

glad you done this need to cut 1 for a tool thanks

[@ralphbarnes2994]

very good. I learned a lot.

[@manufacturingandrepairingskill]

Nice video

[@fuzzy1dk]

seems like it would be important to have the clock gauge exactly on center height to get the correct taper. You could try it, after setting the compound angle, lower the clock slightly and run it back forth again

[@staysheep800]

My idea exactly. If you’re above or below center by literally anything you’re measurement will be wrong

[@douglasthompson2740]

If one adds a full taper attachment to his lathe does that interfere with putting in a DRO? Specifically the X axis of a DRO. At first glance on my Grizzly G4003G it would appear to require remaking the back shield as well as take up the space the scale would go on the lathe bed? I haven't seen anyone doing taper attachments on the smaller (12" x 36") lathes. I would be interested in your thoughts on the subject.

[@doubleboost]

The taper attachment would mean removing the dro scale

[@douglasthompson2740]

@@doubleboost Ouch! I was afraid of that. Thanks for the reply.

[@bobdixon6060]

as per brill

[@paulmorrey733]

Thanks John

[@derrick_v]

Thanks

[@chattonlad9382]

Not last 😁

[@shadowdog500]

You are second to none!

[@chattonlad9382]

@@shadowdog500 🙂

[@jdmccorful]

Thankyou for the lesson! Enjoyed watching.