How to Replace Front Brake Flex Hoses 2012-2018 Nissan Altima

Buy Now!
New Brake Hose from 1AAuto.com 1aau.to/ia/1ABR...
This video shows you how to install a new TRQ brake line engineered to fit your 2012-2018 Nissan Altima. A leaking brake hose is bad news! Losing fluid, or getting air in the system can cause the brakes to weaken or fail completely. Old, dry rotted, cracking, or bulging lines are on the verge of breaking and starting a leak.
This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima
Tools you will need:
• Pry Bar 1aau.to/o4t/1AX...
• 10mm Flare Wrench
• 10mm Wrench 1aau.to/o7S/1AX...
• 21mm Socket 1aau.to/oawK/1A...
• Channel-Lock Pliers 1aau.to/onJ/1AX...
• Ratchet 1aau.to/obWk/1A...
• Torque Wrench 1aau.to/oaZi/1A...
• Brake Fluid
• Brake Parts Cleaner
• Gloves 1aau.to/oaJt/1A...
• Rust Penetrant
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oaox/1A...
• Hammer
• Jack Stands 1aau.to/oaa3/1A...
• Pick 1aau.to/oWY/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/own/1AX...
Subscribe: / @trq
Check out our playlist:
Nissan Altima 5th Generation 2012-2018: • Nissan Altima 5th Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@olenaerhardt7725]

@9:12 On 2009 Nissan Sentra it is 156 in-lbs = 13 ft-lbs (Banjo-bolt, also 12 mm) if someone needs it. Thank you very much for the film, I used it to replace the brake hose on the DS of our Nissan. There was nothing wrong w/it, but I've read that those hoses should be replaced like every 6 years. Tomorrow is the PS. To press the brake I used a special tool fm Amazon (it is a set: press pedal rod and to keep the wheel straight device. That press pedal rod is very convenient, easy w/it). Thank you again.

[@amirzarinkoob6610]

❤❤ tnx for these nice instructions

[@BIiczz-]

would this work for a 2010 nissan altima to?