If you haven’t got your winch yet, FYI take your time on the installation, put some painters tape on both ends of the winch when you mount it so it doesn’t get scratched the 10 S Zion is super tight fitting, I also advise getting 3/8 inch flex head ratchet with a long narrow handle The more narrow the handle the better, and if you can find an 18 mm medium length socket in other words too long of a socket won’t fit in there and too short of a socket won’t reach the threads once you start screwing it in, I found some at Lowe’s where they sell craftsman tools in the 3/8 sizeuand make sure you have a few different length extensions if not some real long ones because mounting the inside bolts to the frame are a nightmare getting in there and if you’re getting the warn mounting plate, it’s very hard to get the bolts through the front to mount the fairlead, and it’s not a structural integrity area so what I did was where the bolts would go through to the fairlead I drilled those out so I could bolt the fairlead onto the bumper before mounting the bumper this way you can lift all of it up and slide into the holes of the frame and when it slides flush to them whinch plate the bolt heads will go through the holes that you widened otherwise it’s a nightmare and it will be much easier to service in the future if this makes any sense, and if you’re doing it yourself just take lots of breaks walk away from it because it is frustrating but it is doable just take your time buddy. 👍
Thank you, that means a lot!! I have some amazing stuff in the pipeline for the 392. I'm trying to dig deeper into the upgrades we have lined up so its not just a surface review, but gives you as much insight as possible.
Another reason, to note, why the OEM factory Mopar hoop is the best choice is because its design height was intentional in order to not obstruct the front factory trail cam.
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
The Jeep here is the nicest car I've seen on TH-cam. I've rewatched it a lot.
Tuning car needs a lot of knowledge about aesthetics
Thank you.
Hey thank you so much! The new lift is finally installed and I'll be shooting that in the next few days. It look incredible!
If you haven’t got your winch yet, FYI take your time on the installation, put some painters tape on both ends of the winch when you mount it so it doesn’t get scratched the 10 S Zion is super tight fitting, I also advise getting 3/8 inch flex head ratchet with a long narrow handle The more narrow the handle the better, and if you can find an 18 mm medium length socket in other words too long of a socket won’t fit in there and too short of a socket won’t reach the threads once you start screwing it in, I found some at Lowe’s where they sell craftsman tools in the 3/8 sizeuand make sure you have a few different length extensions if not some real long ones because mounting the inside bolts to the frame are a nightmare getting in there and if you’re getting the warn mounting plate, it’s very hard to get the bolts through the front to mount the fairlead, and it’s not a structural integrity area so what I did was where the bolts would go through to the fairlead I drilled those out so I could bolt the fairlead onto the bumper before mounting the bumper this way you can lift all of it up and slide into the holes of the frame and when it slides flush to them whinch plate the bolt heads will go through the holes that you widened otherwise it’s a nightmare and it will be much easier to service in the future if this makes any sense, and if you’re doing it yourself just take lots of breaks walk away from it because it is frustrating but it is doable just take your time buddy. 👍
Fantastic advice, thank you Jon 🙏
Had this on my old 392 before the accident - looks and fits great! Ordering it for the new one I just got 🤙
Duuude that sucks so bad! I'm glad you were able to get your hands on a new one and hope you enjoy in good health
Your videos on the 392 are spot on I purchase damn near everything you recommend. Can we get more 392 content? Thanks.
Thank you, that means a lot!! I have some amazing stuff in the pipeline for the 392. I'm trying to dig deeper into the upgrades we have lined up so its not just a surface review, but gives you as much insight as possible.
Another reason, to note, why the OEM factory Mopar hoop is the best choice is because its design height was intentional in order to not obstruct the front factory trail cam.
Great great point 🤘
Where are you located? Do you do upgrades and Mods for 392’s? Your channel rocks!
Sporty look. Love it.
The link goes to something not showing a 392 bumper. Looks like. Different bumper?
I just checked the link, seems fine on my end. What’s the name of the product you are seeing?
Love it so much now, can we install this to my z4?😛😛
Haha lets go!
Does it block the front view camera?
How is it with front trail cam?
Does not block the trail cam at all, you hardly notice it on the screen. Let me see if I can upload a pic for you
You crack me up😃😃😃👍👍👍👍
Can't use front bumper as a seat anymore! Not getting it because of this
Reason #4: Still have easy access to tow hooks.
Damn stinger posers just got called out 🤣