Thanks for the tour. This is the shape of the camper I want to start building this month. I plan to fiberglass and several coatings of paint. I like the simplicity of your build. The PVC water tank is a great idea. Where did you buy the black aluminum trim around your camper?
It was all bare aluminum that I painted black. You can get most of the right angle trim at home centers or metal suppliers. The two pieces in the front angled roof portion I ordered online, I searched for 135* aluminum
It really wasn’t too bad but it did take a lot longer then I expected. If you have a garage or shop to build inside it definitely makes it easier. I had to build in my driveway so getting anything done in the winter was impossible
Really amazing job, it looks insane. It's very inspiring and I'm thinking about doing a similar build. Could you explain how you mountaind the plywood walls on the squar tube frame? Did you weld some metal brackets on the frame in order to srcrew the plywood in? Thanks :)
I've been asked about 12 Volt compressors to use inflating paddle board, air mattress and charging my hot water tank on the top side for showers. Sadly most people have NO IDEA what is the best for the price and powerful enough. As a professional airbrush artist since the 60's ... I have made a portable 12 volt spray make-up for Disney and FOX make-up artist and also for temporary tattoos, with the oldest being 4 years old... I have one in my tear drop. Sparmax makes a single cylinder 12 volt pump ... Iwata makes one, but they are actually made by "Sparmax" Corporation for them and for that extra 100 bucks you get an "Iwata" Sticker .... your choice... The only thing I did for the tattoos and makeup was a foot switch for a tattoo artist.
how did you do the 45* exterior trim on the front near the solar panel ? That is where I am stuck on my trim, can't find a 45 and didn't want to do 2 flat pieces.
I managed to find a 135* trim piece from a supplier online. I may have been out water industries but if you search 135 degree aluminum trim it should come up for you
The rear door came from challenger door. It was a custom order and ended up being about 400 after shipping. You get to choose the color and door latch style and how much it opens which is nice. They do have some standard none custom sizes too I believe.
@minutemenapparel1539 the main issue with frp panels is they are made for exterior use and don’t have anything to prevent UV from deteriorating them. You could possible coat them with an exterior paint or something
Total is about 1500 but I haven’t weight the tongue. It’s definitely light enough to pick up and move around fairly easily but well balanced so it tows very nicely without any sway
@@nickforster2496 Thanks for that info. I'm planning on building one and wanted to make sure it would be light enough for my wife's CRV to tow since it's rated at 1600 lbs.
It was actually a custom order from challenger door. You can call them and tell them what size you need and what color etc and they will give you a price. I wasn’t able to find anything prefabbed in that size range
these are my problems with mini square drop campers theyre to small for two people to be comfortable the doors are tiny my fiance and myself are both over average height and in our 40's crawling in and out one of those would be so uncomfortable lastly the aero dynamics of those things is that of a brick people never talk about the increased fuel consumption due to wind resistance people only want to talk about how lightweight those campers are im glad i realised all these things before i built one edited:to insert omitted word
Best build I’ve seen so far in this style. Great job!
Thank you!!
you did a great job on your build and showing the mistakes on the exterior finish help others know what to do to avoid that so that is a great benefit
Best one built so far.
Hey bro epic build but want to give you a heads up your side widows are backwards the wind can force water through the seal mid window
Nice trailer build ,
Starting a teardrop build and Here I am
Do you have the plans? I’d love to build exact layout. Thank you
Unfortunately I never took the time to make plans, but I do have a very rough sketchup file I used just for the basic frame etc
Great Design
Thanks for the tour. This is the shape of the camper I want to start building this month. I plan to fiberglass and several coatings of paint. I like the simplicity of your build. The PVC water tank is a great idea. Where did you buy the black aluminum trim around your camper?
It was all bare aluminum that I painted black. You can get most of the right angle trim at home centers or metal suppliers. The two pieces in the front angled roof portion I ordered online, I searched for 135* aluminum
Great trailer design! I’m looking to build the same as yours ! Is there a way you could share the tips or how the process works?
It really wasn’t too bad but it did take a lot longer then I expected. If you have a garage or shop to build inside it definitely makes it easier. I had to build in my driveway so getting anything done in the winter was impossible
can you link the website for the custom back galley door? thanks!
Really amazing job, it looks insane. It's very inspiring and I'm thinking about doing a similar build. Could you explain how you mountaind the plywood walls on the squar tube frame? Did you weld some metal brackets on the frame in order to srcrew the plywood in? Thanks :)
I've been asked about 12 Volt compressors to use inflating paddle board, air mattress and charging my hot water tank on the top side for showers. Sadly most people have NO IDEA what is the best for the price and powerful enough. As a professional airbrush artist since the 60's ... I have made a portable 12 volt spray make-up for Disney and FOX make-up artist and also for temporary tattoos, with the oldest being 4 years old... I have one in my tear drop.
Sparmax makes a single cylinder 12 volt pump ... Iwata makes one, but they are actually made by "Sparmax" Corporation for them and for that extra 100 bucks you get an "Iwata" Sticker .... your choice... The only thing I did for the tattoos and makeup was a foot switch for a tattoo artist.
you've done a great job on the trailer congratulations. very good video thank you. anyone looking for where he got the gear look at the description.
how did you do the 45* exterior trim on the front near the solar panel ? That is where I am stuck on my trim, can't find a 45 and didn't want to do 2 flat pieces.
I managed to find a 135* trim piece from a supplier online. I may have been out water industries but if you search 135 degree aluminum trim it should come up for you
Great looking squaredrop! Terrific build!!
your exterior finish looks really good. did you just sand and painted the plywood? could you elaborate more on how you did it? thanks
I used a pray on bed liner over plywood. I skipped a very important step that I would 100% recommend which is to fiberglass the plywood first.
@@nickforster2496Could you get away with just fiberglassing the seams?
One awesome trailer! Do you mind sharing where you got the rear door from?
The rear door came from challenger door. It was a custom order and ended up being about 400 after shipping. You get to choose the color and door latch style and how much it opens which is nice. They do have some standard none custom sizes too I believe.
@@nickforster2496 thanks man 😁 now i need to find a EU distributor 😀
@Nick Forster
Excellent build. Any guess on the cost to build?
I didn’t keep very good track but I would guess with everything including the steel for the frame I’m probably into it about 5k at most
I was wondering what your dimensions are? Looks great
For the license plates. Did you register the trailer as a utility or camper/tv?
Yes I had to take it in to get inspected and licensed
What are the dimensions height, width, length.
Nice
how long is the trailer
I have the same reading lights. If you keep your finger on it, it dims.
What did you use for the walls? FRP Panels?
I sprayed raptor liner over wood. If I did it again I’d maybe use aluminum panels, they are just hard to get.
@@nickforster2496 ah gotcha. I was considering using frp panels but I’ve found ACM panels in stock here in Salt Lake.
@minutemenapparel1539 the main issue with frp panels is they are made for exterior use and don’t have anything to prevent UV from deteriorating them. You could possible coat them with an exterior paint or something
@@nickforster2496 right, was considering using Raptor liner as the coat, since it’s already textured.
Whats the tongue weight and the total weight of the square drop?
Total is about 1500 but I haven’t weight the tongue. It’s definitely light enough to pick up and move around fairly easily but well balanced so it tows very nicely without any sway
@@nickforster2496 Thanks for that info. I'm planning on building one and wanted to make sure it would be light enough for my wife's CRV to tow since it's rated at 1600 lbs.
Nice man...similar to my design. Is that galley hatch prefabbed? If so...do you have sizing you can share? Perhaps a link? Thanks
It was actually a custom order from challenger door. You can call them and tell them what size you need and what color etc and they will give you a price. I wasn’t able to find anything prefabbed in that size range
@@nickforster2496do you remember your Dementions?
@@koltongoebel it was 4ft tall, 5ft wide, and about 10ft long (just the box)
@@nickforster2496 sweet! What about your back door size?
@@koltongoebel I believe it’s about 3ft tall and 4ft wide. It was a custom order from challenger door, it ended up being about 400 after shipping
What did you use for the trim around the outside edges?
It’s all aluminum angle trim that I painted black
What are the dimensions of the box itself without the tongue?
4 tall, 5 wide, and 9 long. Not including the storage box on the front
Due to the queen size bed being a bit too big ,wouldn't a full size bed better, with more room to move around.🤔
We have two dogs so we wanted a larger bed inside we so we could all sleep comfortably
Do you know the weight?
I believe it’s about 1800
these are my problems with mini square drop campers theyre to small for two people to be comfortable the doors are tiny my fiance and myself are both over average height and in our 40's crawling in and out one of those would be so uncomfortable lastly the aero dynamics of those things is that of a brick people never talk about the increased fuel consumption due to wind resistance people only want to talk about how lightweight those campers are im glad i realised all these things before i built one
edited:to insert omitted word