If Monty tries coffee, might P.M. try tea? This is great seeing the tools and techniques, plus the challenges one must work through to build an instrument.
Monty, who told you that you have to keep your vlogs to 10 minutes maximum? I enjoy your vlog content but if you look at other DIY shows on TH-cam, these Shows are at least 20 to 40 minutes. If I need to do something at the time I’m watching your video, I stop it and pick it up where I left off later. Also, you don’t have to upload every day. Upload when you have accomplished a segment of you build that satisfies you or pick a constant day or two of the week to upload. Your not going to loose viewership, you will probably grow at a faster rate that you have. Just adding my two cents to the consortium of thought, nothing more! I truly enjoy your personality and instrument build!👍
Don't worry about video length Monty. People will just pause and come back to finish watching the rest. Joe Rogan (one of the most popular channels on TH-cam) uploads 1hr, 2hr sometimes 3hr long interviews with people and he gets millions of views still.
We'd be happy to watch a long-form video. No worries about that! However, we also understand the amount of work that goes into it. Keep up the great work!
You're going to try coffee????? Wow... I gotta see that!! The guitar is coming along slowly but surely! You have a lot of equipment there in your shop! Wow.
If you have good dust collection, which you should, then it would really be no issue. Just dust your gear off after the session. My gear is doing just fine after 7 years or so in the workroom.
Excellent Monty, great tip on the bandsaw, I would have cut it on the flat not knowing any better. Coffee? Monty said Coffee?? I had to replay that part.👍
Same here. Never would have thought you could make a cut upright on a piece that thin without the blade bouncing. I noticed he tipped it just slightly to keep the chatter down and make a smooth cut which worked beautifully. BTW. Important safety tip. Notice he cannot see where his fingers are in relationship to the blade. The first indication that he misjudged the length of the cutoff would be his fingers going through the blade.
Just got to wonder about somethin'.. How did they go about bending the wood in the old days, without electricity? Did they also use heat or did they go about it in some other way, whilst bending the wood that is? 😁
You covered quite a bit in this one. I think it's my fave so far.
Enjoy the tea and thank you Monty.
Wow, thank you. Wait until tomorrow morning.
We can sit in longer. The 12+ minutes flew by. Loving your videos.
got it Vic, I'll do better. lol
Three times. Monty! I guess I owe you one.
There you go.
I’ve never imagined so much work went into making a guitar. Love watching your videos. 😊
Thank you but just wait for the top. A lot of work for sure. I'll need more tea! lol
😆 That’s a good one! (You’ll need more TEA!) 😆👍
If Monty tries coffee, might P.M. try tea? This is great seeing the tools and techniques, plus the challenges one must work through to build an instrument.
Thanks for your support.
Great way to start the week! I’ve been anxiously waiting for the pieces to come together. 😎
Thank you and you won't have long to wait.
Twenty to twenty-five minute Monty videos sound great to me! However, please do what's most comfortable for you.
I appreciate your support.
Bummer things didn't fit right, but it is a great learning experience. Have a great week!
That often happens. Really it is no BIG deal as we can fit it. lol
Monty, who told you that you have to keep your vlogs to 10 minutes maximum? I enjoy your vlog content but if you look at other DIY shows on TH-cam, these Shows are at least 20 to 40 minutes. If I need to do something at the time I’m watching your video, I stop it and pick it up where I left off later. Also, you don’t have to upload every day. Upload when you have accomplished a segment of you build that satisfies you or pick a constant day or two of the week to upload. Your not going to loose viewership, you will probably grow at a faster rate that you have. Just adding my two cents to the consortium of thought, nothing more! I truly enjoy your personality and instrument build!👍
I appreciate that a lot. I will give it a go. I want to do better video which means I need more time to learn some software. Thanks for the advice.
Oh the suspense! I definitely had 20 minutes for you, Monty! Maybe I should have a cup of tea while I wait... How about an Irish breakfast?
Irish breakfast is good tea. I enjoy it for sure. lol
Don't worry about video length Monty. People will just pause and come back to finish watching the rest. Joe Rogan (one of the most popular channels on TH-cam) uploads 1hr, 2hr sometimes 3hr long interviews with people and he gets millions of views still.
Wow...how does he do that? I'm still learning. lol
Amazing Monty
Thank you Robert!
We'd be happy to watch a long-form video. No worries about that! However, we also understand the amount of work that goes into it. Keep up the great work!
You're going to try coffee????? Wow... I gotta see that!! The guitar is coming along slowly but surely! You have a lot of equipment there in your shop! Wow.
Yes to the coffee. As for the equipment...I actually need more. lol
Or would I 😂😂😂...cheers from Fiji 🌴🌴🌴
Thank you and I hope you are enjoying paradise?
Oh, Peter is going to have a blast with you drinking coffee!
A couple of years ago we were out for dinner and I ordered coffee. He was totally shocked. lol I love it!
Monty McKinnon that's awesome!
Exelent!!!!
Thank you so much.
If you have good dust collection, which you should, then it would really be no issue. Just dust your gear off after the session. My gear is doing just fine after 7 years or so in the workroom.
Time for a cuppa...
For sure. I just had one and another coming in a few minutes. lol
intro looks cool
thank you so much for your kind words. I appreciate that.
It's comming slowly altogether! 😍
Yes it is and we are headed towards some fun stuff.
Can't wait to see the guitar is done! Incredible work Monty!!
It will be a beauty.
It's getting complicated as I see sir Monty but I still love your work, your awesome skills, and creativity.
Thank you so much for your kind wishes.
#LiveYourPassion Marty you are just the best, I really like your TH-cam channel !! Love the beautiful guitars. 🌞🚐🇺🇸
Thank you so much.
Another Great Video. Thank you Sir!
Thank you for watching. I appreciate that.
Subscribed Monty! Suuubscribed (me waiting for the coffee video). 🤭🤭🤭🤭
Oh, it's going to happen. However, remember subscribers live longer. lol
You need to get a English Breakfast Tea sponsor. Looks like it would be easy to accidently burn your hands when working the wood over that heater.
never have up to this point. But, it is possible.
Excellent Monty, great tip on the bandsaw, I would have cut it on the flat not knowing any better. Coffee? Monty said Coffee?? I had to replay that part.👍
Yes, but you still need to sneak up on the cut carefully. lol
Same here. Never would have thought you could make a cut upright on a piece that thin without the blade bouncing. I noticed he tipped it just slightly to keep the chatter down and make a smooth cut which worked beautifully. BTW. Important safety tip. Notice he cannot see where his fingers are in relationship to the blade. The first indication that he misjudged the length of the cutoff would be his fingers going through the blade.
I am VERY careful about where I position my hands on the cut.
Missed opportunity for a video title
“If it doesn’t fit, you must warm it” ala the OJ trial
You and my wife. I thought it would be too obvious. lol
Monty McKinnon hahaha that’s amazing!
Hi Monty, did Peter ever get his tea from the coffee guy?? Great video again Sir, have a blessed day
He refused the tea and ordered coffee. What can I say.?
Just got to wonder about somethin'..
How did they go about bending the wood in the old days, without electricity?
Did they also use heat or did they go about it in some other way, whilst bending the wood that is? 😁
That is a great Q&A for teatime. The would take a pipe and light a fire in the one end to heat the pipe.
Monty McKinnon Oh, I see! Thanks! 😁
Can’t coffee and EBtea live in harmony? How late in the day can breakfast still be?
EBT is good 24 hrs a day.