You should not put any plumbers tape on the plastic threading (0:46) of the bidet handle because the hose that attaches to it has a rubber washer which needs to make contact and that is what stops leaks. If you put plumbers tape you won't make a full seal and it could cause a leak.
Glad I could help I got to say this is a great birthday and it’s very cheap and it works fantastic I don’t think I could use the toilet without one now good luck thanks for watching
Nice video. Do you know what Samodra bidet is the most advanced? I'm looking into the bidet pro and Minimalist bidet models, but couldn't say which is better.
They have all different models some cost the highest 300 bucks that you plug-in and you have heat water and some you can hook right to your hot and cold water at different price points. You’ll have to peruse them on Amazon. amzn.to/48LVpId amzn.to/48LVpId take a look and see what you think is best for you. We just use the cold water ones that cost 29 bucks.
The rationale for pointing the smaller end of the cone washer towards the pipe opening is that water velocity increases as the conduit gets narrower, thus the increasing pressure at the narrow end will push tightly against the opening. I learned this in my Fluid Mechanics course at college.@@TomLeeman
You maybe should have checked to see exactly where the wash nozzles were positioned in the bowl, as if you put it too far to the rear the nozzle rubbers can come off
I am on my 2nd bidet. The first one had the steel bolts and I found out that was bad news. They rusted real bad and I needed help with it. The middle of the bolts rusted. So now everything for the seat is plastic.
This was very helpful but why does my fill valve inside the toilet tank wabble when I put the t adapter on it? Now it's leaking. Did I break something?
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
Great video. Very clear. Easy to understand for a noob
Glad to hear it. Good luck on your install.
Thank you for this. My dad doesn't live near me so I couldnt ask him for help.setting it up. This gave me everything I needed to know!
You are so welcome! I cannot live without one
Thank you for this tutorial, I appreciate you take the time to really question the possible issues and show how you proceed. Tumb's up!
You're very welcome! And thank you for watching
You should not put any plumbers tape on the plastic threading (0:46) of the bidet handle because the hose that attaches to it has a rubber washer which needs to make contact and that is what stops leaks. If you put plumbers tape you won't make a full seal and it could cause a leak.
Excellent tips thanks for that information appreciate it and thanks for watching
Both sides of the tube have o rings
Very helpful from the beginning to the end .. thank u so much
Glad I could help I got to say this is a great birthday and it’s very cheap and it works fantastic I don’t think I could use the toilet without one now good luck thanks for watching
Good job explaining!off i go to install it now.
Glad it helped Good luck on your install. Thanks for watching.
Great directions. Thanks !
You are welcome! Enjoy your new bidet I could not live without one
Oh by the way the button you were unsure of was the self clean for both nozzles 😊
Excellent tip thank you I love my bidet. Thanks for watching.
Thanks for the instructions, Dad. :) also 14:55 doo doo. Heh. I'm mature.
Yes, this thing definitely works. It’s great. I can’t live without it. Thanks for watching.
Nice video. Do you know what Samodra bidet is the most advanced? I'm looking into the bidet pro and Minimalist bidet models, but couldn't say which is better.
They have all different models some cost the highest 300 bucks that you plug-in and you have heat water and some you can hook right to your hot and cold water at different price points. You’ll have to peruse them on Amazon. amzn.to/48LVpId amzn.to/48LVpId take a look and see what you think is best for you. We just use the cold water ones that cost 29 bucks.
As I remember, the pointed/narrow end of the cone washer should be pointing outside of the pipe opening (10:05).
Excellent tip. Thanks for watching.
The rationale for pointing the smaller end of the cone washer towards the pipe opening is that water velocity increases as the conduit gets narrower, thus the increasing pressure at the narrow end will push tightly against the opening. I learned this in my Fluid Mechanics course at college.@@TomLeeman
You maybe should have checked to see exactly where the wash nozzles were positioned in the bowl, as if you put it too far to the rear the nozzle rubbers can come off
Another excellent tip. Thank you.
Great review Tom, well done !
Thanks we love our bidet I could not live without it once you have one you’re never kind of wanna use the toilet without one
Good job this first time out
Thanks!
Can you still use the flush handle if you don’t want to use the bidet?
Of course, yes this just ties into your water flow and of course, the toilet still flushes
The rubber washer points upwards. Its in the crappy instructions, pun intended
Well doesnt tell you but it shows the pointed direction faces u going up into the toliet
Thanks for the info
hello thanks for the video. quick question. no need to connect it to an outlet for electricity?
No need
Thanks for your videos
You are welcome we install two of these in the house and once you’ve got one you’ll never want to use your bathroom without it
Thank You!
My pleasure thank you for watching. Good luck on your install.
So very helpful.
Glad I could help thanks for watching
Thank you sir!
You are welcome thank you for watching
I am on my 2nd bidet. The first one had the steel bolts and I found out that was bad news. They rusted real bad and I needed help with it. The middle of the bolts rusted. So now everything for the seat is plastic.
Good to hear that you got plastic. Good luck on your install and thank you for watching.
Thanks 🙏
This was very helpful but why does my fill valve inside the toilet tank wabble when I put the t adapter on it? Now it's leaking. Did I break something?
Check the attachment underneath water closet that locks the flow valve in that may have become loose
Thank you. I didn't realize that piece wasn't supposed to come off. I got it all fixed! You're video was very helpful!
thank you so much
You're welcome!
Perfect ❤
Enjoy your new bidet
You’re awesome 🤩
You too!!
Muito obrigado!
Thanks for watching
I imagine women start spending even more time in the bathroom with one of these.
These things are the greatest invention since sliced bread
My seat is completely different. American Standard.
It has adjustable seat insert so it should work good luck thanks for watching
@@TomLeeman mine is bemis