Hi guys got a new video here for you today and in this one we take our final look over the BRK Ghost, we recap all the changes we made and take a look at the range results.
Nice overview on the work you have done to the ghost. The brake and carbon shroud combo really finishes off the rifle well and was great to watch you make them.
Leave the brass! It matches the break perfectly :-) Some really bice mods - some subtle, some not so subtle. The finished rifle is a corker! Look forward to the R12 series.....keep up the good work.
Great Honest review as always I have used some of your information to sort my m3 just wondered what you think of the ghost compared to the delta wolf 👍
Thanks 2 very good rifles IMO the ghost is every bit as good as the Deltawolf but you can play with the settings on the DW value for money you cant beat a ghost imo
to be fair i think you have taken a top notch gun and just refined it to a higher level but it helps when the gun is already at a high standard . tip job as always 👍
Very smart work on this lovely rifle. I am seriously waiting to see what you come up with on your own rifle build. Do you have an ETA for that project?
Hi Jeff, just having a few thoughts lately. I’m enjoying my Ghost but the magazine set up is killing it for me. I can see myself getting rid of it because of the magazine. Am I correct in thinking that your pin probe (if the rifle is cocked slowly) will vastly reduce the impact the magazine drum has on the next pellet? As the probe exits the drum the rotation will be in stages- down the taper on to the pin and then a small drop off the end. As opposed to the drop off a cliff scenario with the flat ended standard set up? I have wondered about either drilling another hole to index the spring like you can with the FX ones or just clipping a little off the spring, have you considered anything like this? My magazine does work but pellets 2-about 6ish the skirts get squashed into a triangle shape and it does affect accuracy. Occasionally I get one that jams on the head and ends up clipping a bit off and then it’s a real flyer. JSB 8.44. I’ve had a good look at it and can’t really see anything wrong with it. Many thanks for all your work.
Great vid buddy , I’m having the same problem as another owner on here , with the cycling of the magazine pin probe , did you say Bagnall and Kirkwood do a pin probe in 177 , the normal pin without the hole , many thanks
I’ve been doing a lot of research on the problem and there is a lot of problems from what I can see , easily sorted with a normal pellet probe like the one you made , the 177 hp pellet probe would do the job , but just can’t source one , other than that I’d be really happy with the gun , thanks for your reply buddy
that accessory is a must.all the AK grips are sort of similar. with AR grips there are variations for us that have not normal human size fingers or palms
Good morning, I feel sorry that it is not allowed to do tests at full power where all its qualities can be appreciated. One is left wanting as if you have a Ferrari and they only let you drive it at idle If you have a site on your list please Rti prophet 3 greetings
Depends on your perspective, in the UK the vast majority of shooters only have access to sub12 airguns so what a gun can do at 80ft/lbs plus has no relevance to us and has been covered off by others on other videos. The clue is in channels name when it comes to power 😉
I'm sorry to have bothered you, I'm sorry, I know there are other channels, if you know of any whose content is similar to Sub 12 in high I would be grateful, regards@@paulblundell8033
Nice vid, but this gun in sub 12 makes no sense (to me). Far too many o rings and potential failure points. Expensive also. So i think my choice of bullpup will be a walther reign. Half the price. Also, on guns in this price bracket i like to see a properly indexed magazine. Spring loaded mags are for hatsans.
Another great video chaps ,impressive how you made something so good out the box even better
Thanks 👍
Best air Rifle content on the tube outstanding work
thank you, thanks for watching and taking the time to comment 👍
Nice overview on the work you have done to the ghost. The brake and carbon shroud combo really finishes off the rifle well and was great to watch you make them.
thank you and thanks for watching 👍
Once again bloody good video,very informative as usual 👏
thank you and thanks for watching 👍
Honest about basically rebuilding the entire bloody thing to make it work properly... not surprised when Steve Brew is involved
🤣🤣 you missed the part of the vid where we show the gun working just fine at the beginning, you missed the point of the vids 🙄 and who's Steve Brew ?
Another excellent video I enjoy watching them immensely. Helped me try to fault find my Impact but still having issues.
thank you and thanks for watching 👍
Good overview. I personally like your trigger with the brass and the bearings are a clever touch. 👌👌
thank you and thanks for watching 👍
great vid, would you be able at sometime do/make an adjustable height cheek piece!! please,
i think PRS already do one, thanks for watching 😀
Another great job there👍👍. Can’t wait to see the R12, I am a R10 owner but like the R12 as well.
thank you and thanks for watching 👍
I bet the rifle shoots like a dream with all the upgrade/mods, amazing video and great work👍🏼
it really is a treat to shoot mate 😀
I expect nothing less from the best mate😉
Must be the nicest Ghost in the UK. Very nice indeed.
it has got to be up there mate it's a cracking gun😀
Another excellent piece of work carried out on the brk excellent finish 👍
Thank you Cheers 😁
Thank you Cheers 😁
Nice job as usual jeff, would be nice to see a Rti prophet 3 maybe in the near future
it's a gun i have had no dealings with yet but we will get one to do a few vids on 😀
Great video, thanks very much, the ghost is going on my shopping list 👍
thank you and thanks for watching 👍
Great video as always.will be interesting to see the R12, a few guys at our range have a problems with leaks.
thanks 😀 yes looking forward to the R12 👍
Leave the brass! It matches the break perfectly :-) Some really bice mods - some subtle, some not so subtle. The finished rifle is a corker! Look forward to the R12 series.....keep up the good work.
Thanks Tim 😀
Great Honest review as always I have used some of your information to sort my m3 just wondered what you think of the ghost compared to the delta wolf 👍
Thanks 2 very good rifles IMO the ghost is every bit as good as the Deltawolf but you can play with the settings on the DW value for money you cant beat a ghost imo
Great video, your a master of airguns
Wow, thanks!
Awesome thanks for sharing be safe buddy 👍
thank you and thanks for watching 👍
Great job as always Jeff, and it looks as good as it shoots, really nice Cheers 👌👌👌👌👍👍👍👍👍👍👍
Thanks 👍
Very nice gun. I like your modifications. I have an issue with my FX impact M3. I stripped the stock thread for the top plate 3Mx10 how can I fix it
to be fair i think you have taken a top notch gun and just refined it to a higher level but it helps when the gun is already at a high standard . tip job as always 👍
thank you and thanks for watching 👍
Very smart work on this lovely rifle. I am seriously waiting to see what you come up with on your own rifle build. Do you have an ETA for that project?
thank you 😀 it will be when we have a bit more time on our hands we are just to busy at the moment 😀
Any update on your very own design/production of air rifle?
it still on the list just not had time but it will come 😀
@@sub12airgunners there will be a Shedwolf 3 & 4 before that appears 😘😘
well sorted , great video.
thank you and thanks for watching 👍
Hi Jeff, just having a few thoughts lately. I’m enjoying my Ghost but the magazine set up is killing it for me. I can see myself getting rid of it because of the magazine.
Am I correct in thinking that your pin probe (if the rifle is cocked slowly) will vastly reduce the impact the magazine drum has on the next pellet? As the probe exits the drum the rotation will be in stages- down the taper on to the pin and then a small drop off the end. As opposed to the drop off a cliff scenario with the flat ended standard set up?
I have wondered about either drilling another hole to index the spring like you can with the FX ones or just clipping a little off the spring, have you considered anything like this?
My magazine does work but pellets 2-about 6ish the skirts get squashed into a triangle shape and it does affect accuracy. Occasionally I get one that jams on the head and ends up clipping a bit off and then it’s a real flyer. JSB 8.44.
I’ve had a good look at it and can’t really see anything wrong with it.
Many thanks for all your work.
Use a slug probe, Bagnall & Kirkwood sell them.
One of the fee air rifles w ould certainly like to add to the collection
one the best rifles we have had this year 😀
Would you recommend a BRK Ghost over a FX Impact M3 for someone considering getting one or the other?
i would go Ghost a more solid platform imo 👍
Great vid buddy , I’m having the same problem as another owner on here , with the cycling of the magazine pin probe , did you say Bagnall and Kirkwood do a pin probe in 177 , the normal pin without the hole , many thanks
Hi no we made the pin probe for our one i don't know if huma or someone like that makes one
I’ve been doing a lot of research on the problem and there is a lot of problems from what I can see , easily sorted with a normal pellet probe like the one you made , the 177 hp pellet probe would do the job , but just can’t source one , other than that I’d be really happy with the gun , thanks for your reply buddy
Paul will be an extremely happy chap 😁
I think so mate it's got to be one of the best ghosts in the uk 😀
@@sub12airgunners The Best !!
Great informative video thanks very much,the ghost is now going on my shopping list 👍
what brand of tactical hand grip you used?
we use the ergo air grip but the gun needs to be modified for it to fit
hi where can we find the adapter for the AR grip
it's not an off the shelf part we had to make it
that accessory is a must.all the AK grips are sort of similar. with AR grips there are variations for us that have not normal human size fingers or palms
What is better in your opinion
Brk ghost
Or
Air marks krait
👍
It was a question buddy what would you pick if you had the chance ? @sub12airgunners
@@sub12airgunners any answer on this bud
Is there anyone who works on Ghosts as I’d like the side leaver,pellet probe,trigger and action area sorting out.
we don't do peoples guns but i am sure there's lots out there that do
nice one
thank you and thanks for watching
I think this is not final overview, i want to see more your videos. How to the Fx barrel fit and can use with the BKR ghost.
thanks for watching glad you like them 👍
Good morning, I feel sorry that it is not allowed to do tests at full power where all its qualities can be appreciated.
One is left wanting as if you have a Ferrari and they only let you drive it at idle
If you have a site on your list please Rti prophet 3 greetings
thank you and thanks for watching 👍
Depends on your perspective, in the UK the vast majority of shooters only have access to sub12 airguns so what a gun can do at 80ft/lbs plus has no relevance to us and has been covered off by others on other videos.
The clue is in channels name when it comes to power 😉
I'm sorry to have bothered you, I'm sorry, I know there are other channels, if you know of any whose content is similar to Sub 12 in high I would be grateful, regards@@paulblundell8033
Price
Given how good the gun is I think it should go to the best shoot at Pete’s Airgun Farm. I know who is but he just pretends to be useless 😊
🤣🤣
Pingin banget liat tampilan nya sangat garang, tapi sayang dana tidak terjangkau. 😢
thanks for watching
Yeah but how can i get you to do all your mods to my one..? :)
sorry we don't do them for people 😌
@@sub12airgunners You should, you'd make a mint! :)
Is that a new Rolex?
unfortunately not 😁
Fx impact m3 fake bro???
No it has a one peace chassis and a solid barrel much better than an impact
Much better than a FX Impact
Better engineering that doesn’t keep breaking down 👍
😅ປື່ນເຈົາງາມຫຼາຍຂ້ອຍຢາກໄດ້ເດ
thank you and thanks for watching 👍
Nice vid, but this gun in sub 12 makes no sense (to me). Far too many o rings and potential failure points. Expensive also. So i think my choice of bullpup will be a walther reign. Half the price. Also, on guns in this price bracket i like to see a properly indexed magazine. Spring loaded mags are for hatsans.
Where can I purchase the new valve pin?
Bagnall & Kirkwood sell them 👍
Сколько стоит ?