Layer by Layer - Fusion 360 - Etch Sketch Snap Fit Case
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- In this video we're taking a look at the snap case for the etch-a-sketch inspired project!
Files, Tutorial and code
learn.adafruit.com/sketch-dra...
3D Model of 2.4in TFT FeatherWing
github.com/adafruit/Adafruit_...
Slide Switch Holder CAD Tutorial
• Fusion 360 Tutorial - ...
Layer by Layer CAD Tutorials Playlist -
• Layer by Layer - CAD T...
Visit the Adafruit shop online - www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! adafru.it/discord
Adafruit on Instagram: / adafruit
Subscribe to Adafruit on TH-cam: adafru.it/subscribe
New tutorials on the Adafruit Learning System: learn.adafruit.com/
----------------------------------------- - วิทยาศาสตร์และเทคโนโลยี
I'd like to have seen how you did the snap fits (sketch and extruding technique), but still a good video. Thanks.
Cool project!
That's really cool.
Hello there!
Can you please explain how are the 4 M3 Screws in the corner fastened in to the top? I see the standoff built in the top, but how do the four M3 screws stay attached to it? Are the standoff holed internally threaded? Thanks in advance.
Hello, great question. The holes in the corner standoffs are 2.8mm in diameter, slightly smaller than 3mm to allow the m3 screw threads to tap into holes.