Good freaking lord I hope you're range is optimized to enhance sound cause that thing sounds like a damn 50 BMG! Does DonnyFL make anything for them?? I've got the .35 version in route
The video was shot right next to a steel building, so there is extra noise there. The 357 is by no means a quiet rifle and you may prefer to use ear pro without a moderator. The YOKOZUNA is one from DonnyFL.
bought the aea challenger pro lb gen 2 instead today. $999 for it ad externally adjustable reg and hammerspring and 20 more fpe and an unchoked barrel. plus folding stock. so i think i came out good. andi have had hatsan fail miserably on me. bought it in .35cal and made my .30cal into a lb also. but it does not have a hammer spring adjustment on it. either low or high power spring only.i do hope you like that sniper long though.
I really appreciate you making these videos. I purchased this exact gun in .357 on Pyramid Air but it is on back order. I am currently waiting for it. I am interested to see the next video. You mentioned a max power video? That would be great. Because I want to run mine on max power as well. Also, can the thread adapter on the muzzle be unscrewed? Great video! Can't wait for the max power video.
You are very welcome! Yes, I will be doing a max power tuning on this in the future as there is a lot more power to get out of it. The thread protector comes off just like most other rifles. I had to take the barrel shroud off this one because it was so tight, but it can be removed to install an additional moderator.
Very good video. Let me ask you a question what was the muzzle energy. Hey can you try the 357 predator polymer that's the main reason I want to buy this gun the looks and shooting the predator polymer.. thanks
Thank you! Energy with these 82gr Air Boss pellets is 135fp, this is at stock 150BAR regulator and running about 860fps. In a future video I'll be bumping up the regulator to about 170-175BAR and trying to tune for max FPE. Given that the Predator pellets are 81gr I would expect them to perform the same. I'd have to get some to try, but the only limitation might be the length on those, they might not fit in the mag. EDIT: They will not fit in the mag as they are too long. This is a common thing with these pellets. You would have to use the single load tray.
Good video im curious about this gun in 357. Is it accurate?How fast is it? Your ammo is important. Get some 90 grain zan slugs or 93 grain NSA slugs. Turn up the regulator to 180-190 bar. Adjust the 2 stage trigger. Then do your next video
Not really sure of your questions, this video shows the accuracy with junk air boss pellets of which I had on hand. Accuracy can only get better with better pellets. My previous video here: th-cam.com/video/M0FzbUuqMqk/w-d-xo.html is my chronograph testing with the same pellets at stock 150bar and shows 860fps. This rifle is not likely to shoot slugs well as I am somewhat certain it has a choked barrel (I can't verify right now and haven't personally checked), and the Hatsan documentation only suggest pellets. It would be nice if I am wrong. However, I don't have the funds to test every tune with every weight and diameter slug available as 35 slugs are very costly. My next video on it will be on getting max FPE/good pellets/best accuracy and that's likely all I will do. IMO its shooting great right now, much better than I expected.
One thing I hate about hatsan. I love their 150$ stuff but when they make more expensive stuff, they cut so many corners. It's unfortunate bc they have some awesome looking stuff in general. Just wish they gave a little more effort
Good freaking lord I hope you're range is optimized to enhance sound cause that thing sounds like a damn 50 BMG! Does DonnyFL make anything for them?? I've got the .35 version in route
The video was shot right next to a steel building, so there is extra noise there. The 357 is by no means a quiet rifle and you may prefer to use ear pro without a moderator. The YOKOZUNA is one from DonnyFL.
That that thing is huge, should be mounted on a truck, but it looks great, is it as loud as it sounds on camera? Great video good job.
Thanks! Yes, very loud, and heavy enough that it is likely only to be a bench rifle. Make sure to watch my other videos on it if you haven't already.
I really hope you the max power video soon. I want to see how it performs on max power. When mine gets to me, I want to max it out.
I've got that video in the production queue!
@@InspirePrecision yes!
bought the aea challenger pro lb gen 2 instead today.
$999 for it ad externally adjustable reg and hammerspring and 20 more fpe and an unchoked barrel.
plus folding stock.
so i think i came out good.
andi have had hatsan fail miserably on me.
bought it in .35cal and made my .30cal into a lb also. but it does not have a hammer spring adjustment on it.
either low or high power spring only.i do hope you like that sniper long though.
How many shots do you get per fill what is the FPS and the FPE overall length of the gun???
I'd say about 30-35 shots at full power. I've set it to sbout 940fps which is 160fpe with the pellets I'm shooting. 46" full length.
@InspirePrecision thank you appreciate it!!
I really appreciate you making these videos. I purchased this exact gun in .357 on Pyramid Air but it is on back order. I am currently waiting for it. I am interested to see the next video. You mentioned a max power video? That would be great. Because I want to run mine on max power as well. Also, can the thread adapter on the muzzle be unscrewed? Great video! Can't wait for the max power video.
You are very welcome! Yes, I will be doing a max power tuning on this in the future as there is a lot more power to get out of it. The thread protector comes off just like most other rifles. I had to take the barrel shroud off this one because it was so tight, but it can be removed to install an additional moderator.
@@InspirePrecision Can the thread adapter be completely unscrewed from the shroud? Not just the protector but the entire thread piece.
Yes it is a separate piece from the shroud, although I don't know the actual thread size between it and the barrel.
@@InspirePrecision Good to know. I am curious if a Donny FL adapter for a 18MX1 will screw into that gun to put on a .357 Ronin.
Very good video. Let me ask you a question what was the muzzle energy. Hey can you try the 357 predator polymer that's the main reason I want to buy this gun the looks and shooting the predator polymer.. thanks
Thank you! Energy with these 82gr Air Boss pellets is 135fp, this is at stock 150BAR regulator and running about 860fps. In a future video I'll be bumping up the regulator to about 170-175BAR and trying to tune for max FPE. Given that the Predator pellets are 81gr I would expect them to perform the same. I'd have to get some to try, but the only limitation might be the length on those, they might not fit in the mag. EDIT: They will not fit in the mag as they are too long. This is a common thing with these pellets. You would have to use the single load tray.
Good video im curious about this gun in 357. Is it accurate?How fast is it? Your ammo is important. Get some 90 grain zan slugs or 93 grain NSA slugs. Turn up the regulator to 180-190 bar. Adjust the 2 stage trigger. Then do your next video
Not really sure of your questions, this video shows the accuracy with junk air boss pellets of which I had on hand. Accuracy can only get better with better pellets. My previous video here: th-cam.com/video/M0FzbUuqMqk/w-d-xo.html is my chronograph testing with the same pellets at stock 150bar and shows 860fps. This rifle is not likely to shoot slugs well as I am somewhat certain it has a choked barrel (I can't verify right now and haven't personally checked), and the Hatsan documentation only suggest pellets. It would be nice if I am wrong. However, I don't have the funds to test every tune with every weight and diameter slug available as 35 slugs are very costly. My next video on it will be on getting max FPE/good pellets/best accuracy and that's likely all I will do. IMO its shooting great right now, much better than I expected.
Would love to see penetration tests at various ranges/various bullet weights. Maybe on cow skull(s) and ballistic gel? Love the videos !😉👍
I have some sort of penetration test planned, not entirely sure what, but in the future for sure.
@@InspirePrecision continued successes !
One thing I hate about hatsan. I love their 150$ stuff but when they make more expensive stuff, they cut so many corners. It's unfortunate bc they have some awesome looking stuff in general. Just wish they gave a little more effort
bonjour super tes videos que pense tu de la qualité hatsan
Thanks! The quality this rifle is ok, there are many rough/sharp edges, but it holds air and shoots very well.
Excellent!!
Many thanks!
nice man
insane prezise :)
They need to start putting new tanks on their new guns
Bu ürün bizim ülke üretiyor yani Türkiye aslında fena değil sadece hedefte çok iyi değil bide çok pahalı 🇹🇷❤️👍