First of all i must say great work!Its a masterpiece...Well done! could i know where to purchase the front and rear wide body panels from? im from Kuala Lumpur Malaysia? Thank you. keep it up!!!!
Hey I was wondering where did you get the rear and front wide fenders from as they look they are not fiberglass which is better. I need them for my a124 convertible project. Your car came out amazing!! Any help where to order them I appreciate it and your work is beautiful!! Are your in the US??
This is most likely well beyond 15k in parts and at least 250 or more hours into the labor. Very time consuming to remove the full wiring harness and organizing/labeling/recording where it goes along with the 500 engine swap and wiring for that. Lots of time and patience.
You order it from Mercedes Benz, they should be available, buy the front fenders as well, or just safe up the money for a proper 500E, they are rare but worth it.
Hlynur Stefánsson dude can you provide me some contact or link for that. Googling for it but nothing since quite time. I only fiber planes available but they are far from a e500 look.
It´s most likely a special order at a Mercedes Benz dealer, i found one one ebay with some minor damage, but the dealer can supply W124 fenders for sure, no bodyshop recommends aftermarket panels since they never fit or rust fast. You could also pull out the fenders like the AMG bodykit manual guides for E36 conversion, but that is not so obvious as the 500E. There are other ways of making the panels, but i think original is the way to go...and best of all buy a complete 500E, they also handle a little bit better than a regular W124, buy the E420 get 95% of a 500E (same engine, same brakes, same transmission, different differential and different fenders, and rear bench has space for 3), those are much cheaper than the more collectable version.
This work is incredible! For myself though, I would buy a clean W124 sedan (E320 - E430) install a 5.3 Chevrolet LS engine and GM 6l80e six speed auto, wheel flares in fiberglass, paint, monoblock wheels, springs, sway bars, SL600 brakes and put it on the road, emissions legal, and faster and handling better than an E500, for $12,000
Jezus man , i cant explain how sick this looks , it isnt overdone , it still keeps that 500e styling but it has a touch of modification
124 the last real Mercedes
208 and 210 are the last ones
@@TheAwakez w211
W140
thanks
r129
за душу цепляет, вот есть у меня любовь к этому кузову.... Были у меня разные и даже 4.2, но все равно хочу ЕЩЕ!!!
Use me as „SUPERLIKE BUTTON“.
Однозначно лайк👍👍👍💯
Салам из Казакстан 🇰🇿
The best E Class. Very tough body.👏👏👏👏👏👏
9:16 that view 😲😍
.. 🤤 What a job .. !! 🙏 And what a car..!!👍❤️🤗 Congratulations, respect!👍 And thank you very much!!..
Other than rims and foglights it looks perfect.
awesome build, what changes has been done to the engine bay?
i like the build a lot but i have to tell you, I watch your video over and over again for the first song! its soooo good, I love it
Искал русские комментарии 😁
Но почему? Мы знаем, что россияне знают, что хорошо! Определенно из-за этого. Привет из Венгрии! 😉
9:30 Looks amazing. Awesome talents.
hi, nice work. where it comes from is wide rear and front metal fender?
Where can I get the front and rear wide body fenders?
I have a 1995 320E... can I do this?
Beautiful work on a beautiful car. It deserved the effort and money.
мелькнуло пара фоток, напомнили один материальчик с размерами арок. хорошая работа. проконсультироваться возможно у вас, по паре моментов?
Sharp and sporty looking Benz, like to have mine similar to that one day
I usually hate rich Russians (especially when on holidays). But when it comes to building custom cars, they are extremely skilled. And nuts. That too.
Why russians specifically? And why do you hate them? lol
hey man nice work car looks great.
kan u or someone tell me the name of these wheels ? thx
OZ Futura 3 Piece
Please inform the specs of size velg and tires you are using. Great work. Thanks👍
Verry good job! I like this old mercedes the sexiest car in the world
Anyone know what wheels are on it? Want a set for my e39 M5
Like a new car but 100% better. This it the beast bro. #respect. I love it so much.
What twin 5 spokes are those… the ones from the snow pictures??
Where did you get the rear section? Seriously 😮
Are the front and rear wide fenders made out o steel or fiberglass?
this is an amazing challenge!!!!! great work !!!!
W124 the best never dies
Excellent work. Wow, I am very impressed
First of all i must say great work!Its a masterpiece...Well done!
could i know where to purchase the front and rear wide body panels from?
im from Kuala Lumpur Malaysia?
Thank you.
keep it up!!!!
I’m also interested in the front and rear wide body fenders;where did you get them front,and are they original AMG parts or reproduction?
You've made the vest car ever! Even more stunning I'm jealous but happy for you lucky thing!! Awesome job
Great job,, from where I can get this full 500E wide body set??
Please inform us
Hey I was wondering where did you get the rear and front wide fenders from as they look they are not fiberglass which is better.
I need them for my a124 convertible project.
Your car came out amazing!!
Any help where to order them I appreciate it and your work is beautiful!!
Are your in the US??
X2
It's so beautiful and so pretty car. W124 my first car and my first love. Author can you tell how much money did you spend for this?
This is most likely well beyond 15k in parts and at least 250 or more hours into the labor. Very time consuming to remove the full wiring harness and organizing/labeling/recording where it goes along with the 500 engine swap and wiring for that. Lots of time and patience.
Where did you buy the parts?
Rims?
Stunningly beautiful.would be out of this world if it was done on w124 ce
Beautiful colour choice.
Omg ! Perfect job ! Amazing ! Where buy steel rear wide body ?!
Marcin Kabus this is what I want to know!! I've been waiting a rear widebody on my w124 for forever!
You order it from Mercedes Benz, they should be available, buy the front fenders as well, or just safe up the money for a proper 500E, they are rare but worth it.
Hlynur Stefánsson dude can you provide me some contact or link for that. Googling for it but nothing since quite time. I only fiber planes available but they are far from a e500 look.
It´s most likely a special order at a Mercedes Benz dealer, i found one one ebay with some minor damage, but the dealer can supply W124 fenders for sure, no bodyshop recommends aftermarket panels since they never fit or rust fast. You could also pull out the fenders like the AMG bodykit manual guides for E36 conversion, but that is not so obvious as the 500E. There are other ways of making the panels, but i think original is the way to go...and best of all buy a complete 500E, they also handle a little bit better than a regular W124, buy the E420 get 95% of a 500E (same engine, same brakes, same transmission, different differential and different fenders, and rear bench has space for 3), those are much cheaper than the more collectable version.
Hlynur Stefánsson thank you ever much . My passion on w124 build project pretty much depended on these panels. I will keep your advices.
where did you get the panels im looking to do this to mine
did you manage to find the wide panels?
Did you fitted the w140 s classe clusters on the this w124? I think it looks beautiful.
I love the end result body work wise...the wheel choice not so much.
Should have used those old amg wheels
beautiful, such an inspiration to build mine.
where did you biught the wide fenders?
Who Made the exhaust System?It looks fantastic!I need one for my w201 3.6.......Thank you!DREAMCAR!!!!
What size wheels and tires? Offset? The ones at the end with the step lip
definitely looks like at least 20mm spacer
Hi, i have the w202 c250 without turbo from 1995, can i ask you where did you get the widebody and brake sistem?
Were there any difficulties in fitting a 5.0l v8
how much it coast ?
mercedes needs to add yours to the her claimed 10000 unit of E500E
SICK CAR!!!
Where did you get the widebody arches from?? Besides the 500E of course. Anyone know? Thank you for good replies :)
Facebook.com/mbbodykits
Thank me later
did you manege to find widebody panels?
She is a beauty. 😍😍😍
I am super jealous. Please someone tell me where to find the wide body kit. Fenders etc.
Which country do you live?
Which country do you live
I have a w124 and needed a rear bumper. Can someone help me ?
Color is perfect
Hoooly shit... fell in love
hi . anyone know where can i purchase all this widebody panel ? original or OEM
That's a car!!!love it!!
Beautiful 😍
I need to get the wide body part can any help
So beautiful objekt !!!! The King !
Hi buddy how are you?? Can you tell me where from you buy this brake calipers?? I’m very like it !!!
Rims n tire specs??? Pls share
Интересно во сколько обошлась вся работа. .)
Alkhat95 как я понял все делали у официалов ... так что стоимость лучше себе не представлять )
Если делать самому не менее Лямов вместе с покупкой авто. И плюс за работу
Мечта не измераятся ни в чем
Несколко ребят тратили по + - 40 000$
just love it! great work :D
Hello, where i can bay that full body kit?
Обожаю этот Мерсс волчонка
yes this is soo good nice car...thank you so much
This work is incredible! For myself though, I would buy a clean W124 sedan (E320 - E430) install a 5.3 Chevrolet LS engine and GM 6l80e six speed auto, wheel flares in fiberglass, paint, monoblock wheels, springs, sway bars, SL600 brakes and put it on the road, emissions legal, and faster and handling better than an E500, for $12,000
Do one then i will buy it, but it must be a right hand drive
@@mosesshuuya5286 is this MK from Polytech, Entrepreneurship Honours graduate?
@@b.shafudah8888 yep
@@mosesshuuya5286 I knew it. Order comrade
Aand you got a nice collection of sneakers
wow just wow! AMAZING
Needs old school monoblock wheels
Music???
Ehrling Dance with me
Great car !
Excellent work! :-)
superbe job
Only thing it needs is an amg ducktail then it would look badass
Stipe Marić agreed. Ducktail is so simple and subtle yet makes it looks insanely badass :)
why was there a need to remove the whole engine out just to widebody the car ?
Hermon Basil that's what I want to know lol super excessive
Its build project, so probably for other then cosmetic reasons (maintenance, modifications, etc). Just my guess. Have a good day!
Its not like he just put the panels on... He did alot of other stuff aswell im sure.
He swapped out the engine.
Stunning!!
Amazing, well done 👍🏼
Not even one photo from inside.😓
Wolf the best
Sick Build
Plz show me one photo of the car without effect how it locks because i also want to paint like this my car
Hot machine
Есть инста хозяина?
superwork keep it up
big brake for 324ps? xD
How much will this project cost me?
Moses Shuuya 18-26K are you interested?
W124 the last of the pre-electronic controlled suspension and transmission Mercedes-Benz 😎
😍😍😍😍😍 sehr schön❤
С какого города ребята ?
Хочу предложить вам проект на базе кабана
What is first music name?
Co to za alufelgi?
Ни одна бнв не сравнится с ним
Dinegriku seprtinya belum ada yang mengerjakan seperti itu.
😓
Beautifull!!