Ford Mondeo MK3 Rear spring replacement Project ST220

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 9

  • @ChazzCoombes
    @ChazzCoombes  6 ปีที่แล้ว +2

    well we ran out out daylight doing this, so had to do the fronts on another video, if you find any of my vids helpful please leave a like and consider subscribing, thanks

  • @paulabraham6774
    @paulabraham6774 4 ปีที่แล้ว

    Good one this!Can you tell me where I can get standard rear shocks and springs for st220,there are so many different sizes!!
    Notice your colour code in vid is red,Red,orange,the same as mine -and what I require
    Cheers

  • @stevencummings2395
    @stevencummings2395 5 ปีที่แล้ว +2

    Great video chazz but your mate put a knackered rear strut top mount back on . they aint suppost to come apart

    • @ChazzCoombes
      @ChazzCoombes  5 ปีที่แล้ว

      well spotted mate, i did wounder that myself. Something to add to the list off many things to still be done

  • @danbarnes4069
    @danbarnes4069 3 ปีที่แล้ว +1

    Hi Chazz
    How much lower did it sit on the Eibach's? I read that they are about 30mm - 35mm but wasn't sure if that translated over to the ST220 as I think it sits slightly lower than the other models?
    Was thinking about putting these on mine but didn't want it to sit much lower. - The springs on mine have never been replaced as far as I can tell.
    Dan

    • @ChazzCoombes
      @ChazzCoombes  3 ปีที่แล้ว +1

      Hiya Dan, its sits at 30mm. There low as standard to other mondeo mk3 variants i believe. I think 30mm seems ok, so much so i am considering dropping to mk4 by 30mm lol

    • @danbarnes4069
      @danbarnes4069 3 ปีที่แล้ว

      @@ChazzCoombes Ok, I'll have to dig my tape measure out and have a think.. Norfolk roads and all. Did you change the shocks at all? I was also looking at Bilstein B6s but not sure if they would work with a shorter spring

  • @paulmayou370
    @paulmayou370 6 ปีที่แล้ว +2

    how low you wanna go lol