Bryce_MF_Frank also if you haven't already make sure you reseal the housing and the exposed hole in the back with silicone otherwise water will get in them when it rains
@@mlifestyle8067 same man the led taillights were too expensive so I made my own by cutting mine open with a dremel and adding LEDs. Also painted the housing black. Looks way cleaner than just tinting it black
I got the same once too. I just have one doubt, do they start with you ignition button and stay on until the car is turned off? Or do you turn them on after turning the lights knob to parking lights?
What's the lightbulb type? Driving me crazy. All these sites tell you that there is a turning light and a running light, totally different ones, but there is only one light in this car...
@Viiperious you can just plug the connector into where the normal halogen bulb would go. Theirs 1 wire that gets wired directly but the rest work with just plugging it in
@Viiperious yes the loose red wire is for the white led. you splice it the wire that goes to the top hole when you're looking at the plug with 3 holes, 2 holes on bottom 1 on top. You're connecting it that top one but instead of sticking it in the hole like in my video just wire it directly to that wire.
The white wire is optional. It goes to the headlight wire so that when you switch on the headlight, the DRL Led will dim. That's what I found from other video with different type of LED design though. But I'm sure it should be similar.
Seems possible. These switch from white to orange completely though so I don't know why it would dim the white light instead of turning it off completely so t he orange leds can be seen better
I got my LEDs (same ones) like a week ago and the white cord to the LED was cut off when I got the package. I'm going to try what you did tomorrow . Thanks for the video
petquack no problem, let me know how they turn out... also make sure you reseal the housing with a clear silicone. Around the edges and where the wires go into the housing. Good luck and if you need any help just lmk
What are the white wires even for i didnt get no instruction manual or nothing i connected it a lil different nd everything works except i have to turn off my headlights to make them turn white and once i turn on my headlights theh go to orange and then when i try using my turn signals both lights left and right blink like if i had my emergency on and also they didnt fit that good theyrs a prettt big gap in between the fog light plastic cover and the drl
Those switch backs dont work...i tried everything i could to stop the hyper flashing. i added load resisters......and it still doesnt work....the system is built different on the 2013-2014 nissan altimas.if you noticed .he didnt show the finishing results. these only work w/o hyper flashing when you use the hazards
jujumediazone you don't know what your talking about. Do you see how bright it is outside? And not only are these things brighter then any led or HID ive seen but I called them recently because the color started to slightly chang on 3 of my lights so they sent me 3 new 1s for free. It has a 3 year warranty and my 3 years will be done this coming February so it really worked out that I got the new ones before .. What other HID'S do you know that have an amazing warranty and product. They aren't cheap but i would buy them again in a heart beat, that's how good they are
jujumediazone my fault I thought you were talking about the HID'S, but yea they aren't the brightest leds but you can definitely see them during the day, and at night they look amazing. I have a vid if them at night also
So I found a better way to do it. Updated vid on my page th-cam.com/video/YTay6CjEYEI/w-d-xo.html
Forget the negative comments bro it’s worth the money thanks too you I hooked it up correctly
+Bryce_MF_Frank thanks man, glad I could help and im glad it worked good for you. Our cars will be looking clean at night
Bryce_MF_Frank also if you haven't already make sure you reseal the housing and the exposed hole in the back with silicone otherwise water will get in them when it rains
Hell yeah yours all White mine is all black a great look
Thanks bro just got the lights did exactly what you did they work perfectly and there bright even on a sunny day
Thanks man, I found an easier way to do it also. I'll try and post a video on it
Oh ok cool yea I’m looking on how retro fit oem led tail light I’m not trying spend 900$ for them led tail light lol
@@mlifestyle8067 same man the led taillights were too expensive so I made my own by cutting mine open with a dremel and adding LEDs. Also painted the housing black. Looks way cleaner than just tinting it black
I got the same once too. I just have one doubt, do they start with you ignition button and stay on until the car is turned off? Or do you turn them on after turning the lights knob to parking lights?
They only turn on with parking lights
What's the lightbulb type? Driving me crazy. All these sites tell you that there is a turning light and a running light, totally different ones, but there is only one light in this car...
It's on Ebay. This is it
www.ebay.com/itm/203626363395?chn=ps&mkevt=1&mkcid=28
Where is The withe cable conected to ?
I didnt connect to anything. Worked without it
for some reason the white light works but the turn signal doesn’t, any help?
Try and disconnect the power wire that goes to the white light and connect the power wire for the orange light to see if the orange leds even work
You should only have to use 3 wires. 1 ground and 2 powers wires. 1 power wire goes to white led and 1 goes to orange led
For $120 you get both sides or just one side?
Both sides
Where you buy these?
On ebay just type in altima led switchback
Hey im plugging all the wire just like you did but my white leds dont show but the turn signal works
What year is yours?
I actually found a better way to do it. I'm gonna post it soon hopefully
@Viiperious I'm sorry I've been super busy but I'll try and do it soon
@Viiperious you can just plug the connector into where the normal halogen bulb would go. Theirs 1 wire that gets wired directly but the rest work with just plugging it in
@Viiperious yes the loose red wire is for the white led. you splice it the wire that goes to the top hole when you're looking at the plug with 3 holes, 2 holes on bottom 1 on top. You're connecting it that top one but instead of sticking it in the hole like in my video just wire it directly to that wire.
The white wire is optional. It goes to the headlight wire so that when you switch on the headlight, the DRL Led will dim. That's what I found from other video with different type of LED design though. But I'm sure it should be similar.
Seems possible. These switch from white to orange completely though so I don't know why it would dim the white light instead of turning it off completely so t he orange leds can be seen better
colour blue? white?
White and orange
gabrielgalaxygh
My own glows blue
Why is that
White is good
@@てまもと-f6p blue is illegal in usa. We can only drive with white or orange
gabrielgalaxygh
Blue is also illegal in Japan
Is this product available in blue type and white type?
I also liked white😂
@@てまもと-f6p oh I didnt know that and yea I believe they come in blue and white also
Where did you order the lights?
Gregory BonomoI the switchbacks are from ebay, I might have the link still
gabrielgalaxygh let me get the link
I got my LEDs (same ones) like a week ago and the white cord to the LED was cut off when I got the package. I'm going to try what you did tomorrow . Thanks for the video
petquack no problem, let me know how they turn out... also make sure you reseal the housing with a clear silicone. Around the edges and where the wires go into the housing. Good luck and if you need any help just lmk
What are the white wires even for i didnt get no instruction manual or nothing i connected it a lil different nd everything works except i have to turn off my headlights to make them turn white and once i turn on my headlights theh go to orange and then when i try using my turn signals both lights left and right blink like if i had my emergency on and also they didnt fit that good theyrs a prettt big gap in between the fog light plastic cover and the drl
@@jesuslima408 no idea what white one is for. So far mine still working normally
You were supposed to plug it in to the bulb socket...
You don't think I tried the most simple way first lol. My white leds wouldnt work when I did it like that
So I bought new ones and found put you can do it like you say but you have to splice one of the wires to make it work
Those switch backs dont work...i tried everything i could to stop the hyper flashing. i added load resisters......and it still doesnt work....the system is built different on the 2013-2014 nissan altimas.if you noticed .he didnt show the finishing results. these only work w/o hyper flashing when you use the hazards
Henry Williams you don't know what your talking about man. Mine don't hyperflash at all, even when it's just the turn signal
Just do it exactly like mine, I didn't use a load resistor either
Yea mine worked fine, i did it exactly like on the video . And there was no hyper flashing . Thanks for the video
@@frankiesoto9768 glad it worked
Ok well let me see the indiviual flash then.
Henry Williams lol just for you man th-cam.com/video/janewGwE2NE/w-d-xo.html
gabrielgalaxygh im impress .looks good. Ill watch the video again. Good job. Bought time someone came up with a good video. Thumbs up . Man.
Hopefully it works for yours man, if you need any advice or help just let me know? Always glad to help out
gabrielgalaxygh definately.
OMG those LEDs are terribly dim.... not worth $110
jujumediazone you don't know what your talking about. Do you see how bright it is outside? And not only are these things brighter then any led or HID ive seen but I called them recently because the color started to slightly chang on 3 of my lights so they sent me 3 new 1s for free. It has a 3 year warranty and my 3 years will be done this coming February so it really worked out that I got the new ones before .. What other HID'S do you know that have an amazing warranty and product. They aren't cheap but i would buy them again in a heart beat, that's how good they are
jujumediazone my fault I thought you were talking about the HID'S, but yea they aren't the brightest leds but you can definitely see them during the day, and at night they look amazing. I have a vid if them at night also