Hey guys I'm no expert (so i may be wrong) but i see a-lot of people are wondering what electronics are used here, from what i know this can be achieved with a DC Motor PWM Speed Regulator DC motor of course an on off switch and AA battery container Hope this helps somewhat!!
The most simplest turn table I just came up with right now is to use two top lids of paint bucket (plastic ones preferred) 1 small and one large, some marbles and a string. Put some marbles on the top of small lid then place the large lid on top of the marbels tie the string around the large lid set up camera and pull the string to your preferred speed... Viola 😅 you have a turn table. BTW you can also control the speed of the moving object in Video Editors.
Pretty cool project. I could make this but I am not an electrician and I don't understand what the parts are. Would have been nice to have listing links. After reading comments and searching to buy the electrical components I found it was not any cheaper than buying a turntable already made.
cheaper if you make a bunch though! Almost nothing is cheaper than if you were to buy from someone who mass produces something, same conmecpt with food it cost much more to raise chicken for 12 eggs only than to just buy 12 eggs
do you have a tutorial video on how to actually do the electrical part of this for those of us who don't know how? I enjoyed the video and was inspired with an idea, but I know nothing about wiring and motors.
@@创趣哥 What is a "Reducer".. also.. how do you know where the wires go lol? What Voltage is the gear motor? Could you please make a little more specific or put links to find the "Gear Motor" and the "Switch" and "Reducer"? Thank You
Very cool but if u add the stuff u used like the switch motor power speed switch battery port and the cardboard u can get any place u will attract more people to buy what u have
It depend on what motor you get, if it is slow (look for RPM (Revolutions per minute, you can find 3 options), than you do not need the reducer, especially, if you do not need the variety of speeds.
Great Video Sir! I was wondering exactly what the "Reducer" is called so that I can look for it. I found the gear motor but trying to find the reducer and not quite sure how to look for it... do you have a link to where I can buy? Thank You again... I want to make these and totally decorate them for my craft fairs. Thanks for helping others make things to cut down on cost for us.. You are AWESOME! God Bless
Without materials description, transcript, or any narration on video I can’t make this. I am relatively new to working with electronics so I don’t know the names of all the parts, and how to wire everything wasn’t clear without instructions.
@@invii2049 - Isn't this what this gear motor is? Same as the microwave? I did some research for a couple of weeks and found every piece here that he showed with some help from a great guy that has another video but his was not battery operated. Anxious for the items to come in but some things I'm still unsure of. The battery pack I got was I think 1.5 V or something like that and using AA battery. I think that part is wrong and the battery pack needs to be higher V. I guess we'll find out down the road lol
Hey guys I'm no expert (so i may be wrong) but i see a-lot of people are wondering what electronics are used here,
from what i know this can be achieved with a
DC Motor PWM Speed Regulator
DC motor of course
an on off switch and AA battery container
Hope this helps somewhat!!
Thank you!
no might not be an expert but a awesome guy to let us know thank you!
Thank you a lot sir! ❣️
Wht type of dc motor?
You nailed it :) a true expert.
Stepper motor or dc motor, motor drive for PWM (speed), rocker switch, 1 x 18650 battery + holder, 10k potentiometer (dial to control speed)
Robotics hobby shops, amazon, ebay
Motor drive pwm has built in potentiometer now a days
OK....By minute 4, I was alrdy like, 'Heheh ..Yeah...Simple.' Anyone else?? Gotta b a simpler way. Excellent wrk tho! Great DIY job!
It easy tho
I made this one with a microwave motor...thanks to this video...
For microwave motor, are u using battery or power socket to connect the power?
Which Kit.. use plz kit name....
The magnetron inside a microwave can contain beryllium oxide in their ceramic insulators which can be fatal if it gets into the lungs.
@@sisirmallick6635 it's just the lil motor that the microwaves have to make the plate inside turn
Thanku so much sir. .I was searching exactly this diy to display my dolls ..thanku so much
The most simplest turn table I just came up with right now is to use two top lids of paint bucket (plastic ones preferred) 1 small and one large, some marbles and a string. Put some marbles on the top of small lid then place the large lid on top of the marbels tie the string around the large lid set up camera and pull the string to your preferred speed... Viola 😅 you have a turn table. BTW you can also control the speed of the moving object in Video Editors.
Pretty cool project. I could make this but I am not an electrician and I don't understand what the parts are. Would have been nice to have listing links. After reading comments and searching to buy the electrical components I found it was not any cheaper than buying a turntable already made.
cheaper if you make a bunch though! Almost nothing is cheaper than if you were to buy from someone who mass produces something, same conmecpt with food it cost much more to raise chicken for 12 eggs only than to just buy 12 eggs
If you use black or white colour in the top and base it looks cool. But great job
Nice idea. Thank you for sharing❤
Excellent video! Would be very useful to get links to buy materials. Thank you for sharing this! 🙌🙌🙌
very good
Nice project brothers🙏
Excellent work but it can't long last since you made it using soft cardboard material.
It's geared motor guys you can buy it for ₹200 ,go for less than 60 RPM
Good idea!!!
Thank you for sharing!!!!!
Hello please list of tools
Knife screwdriver hot glue
Superb😎
do you have a tutorial video on how to actually do the electrical part of this for those of us who don't know how? I enjoyed the video and was inspired with an idea, but I know nothing about wiring and motors.
Nice thanks
Great idea, what are the plastic mount covers for the motor called thanks
Excellent work
can you please list where you got the motor and the knob that controls the speed? We need a parts list if you don't mind.
@Deepak Soam thanks
Thanks to this video. It gave me an idea👍🏼👍🏼👍🏼
Where'd you get the hard parts?
Thank you, really helpful.
Stunning!
Pls in sub item ke name bta do to asani rhegi bnane me apka idea bhut acha h
What materials used?
cardboard
Gear motor
switch
reducer
battery
@@创趣哥 What is a "Reducer".. also.. how do you know where the wires go lol? What Voltage is the gear motor? Could you please make a little more specific or put links to find the "Gear Motor" and the "Switch" and "Reducer"? Thank You
@@创趣哥 What kind of battery was used? Thank You
@@创趣哥 Hi Zhang, Do you have a link where I could buy a moto speed reducer board? Thank you in advance.
Very cool but if u add the stuff u used like the switch motor power speed switch battery port and the cardboard u can get any place u will attract more people to buy what u have
Great👍👍👍
Very clever Idea.. good job.. thanks
Which motor is this?
Kreatif, bagus dan rapi... Ada yg tau apa nama alat penyetel kecepatan dinamonya?
What a great tutorial, excellent work. Thanks for sharing it with us.
nice
Can we control the speed??
Hey thanks, can you tell what items you used because cardboard and where we can find it. Like store
Where do u get the motor tho
Thank you. I think this is going to work perfectly for what I want to make. 💜💕💜
What is that white cap on mortor.what is the name?
Super
what the name of the white plastic support for DC motor?
what kind of reducers is more important.
It depend on what motor you get, if it is slow (look for RPM (Revolutions per minute, you can find 3 options), than you do not need the reducer, especially, if you do not need the variety of speeds.
Look, I don't have all these wires can I just buy it?
Can you tell us the parts which you have used to create this, If Possible create a rotating table with wood
Please may I know the names of the items used? Great work by the way
Are there links for parts that can be ordered?
Great Video Sir! I was wondering exactly what the "Reducer" is called so that I can look for it. I found the gear motor but trying to find the reducer and not quite sure how to look for it... do you have a link to where I can buy? Thank You again... I want to make these and totally decorate them for my craft fairs. Thanks for helping others make things to cut down on cost for us.. You are AWESOME! God Bless
www.amazon.com/HiLetgo-Control-Regulator-50-220V-Adjustable/dp/B00LODGP2E/ref=asc_df_B00LODGP2E/?tag=hyprod-20&linkCode=df0&hvadid=198096195532&hvpos=1o1&hvnetw=g&hvrand=5073508809335398306&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9024246&hvtargid=aud-801381245258:pla-351252383508&psc=1
Thank You so much. Been a long time since I was going to make these but will soon be back in it and very excited.
Potentiometer or variable resistor
Which machine was that
Can you say what are the material you used
Which motor used this item
Without materials description, transcript, or any narration on video I can’t make this. I am relatively new to working with electronics so I don’t know the names of all the parts, and how to wire everything wasn’t clear without instructions.
Wonderful
superb
Hmm what type of motor did you used because in market only fast rotating motors are available
Can u tell us what is the size and width
Is that from korea?
I like rotating table
Can anyone send a wiring diagram to the electronics?
list materials you used specific name also of materials tnx bro specially (reducer) what type or brand?
from where u buy motor and circuit ?
sir please tell me how to rotate 180 degrees
don't they just sell those battery operated rotating motors ready to go somewhere?
Motor name pls❤
Aap me koi mujhe ye bata sakte h ki isme kon kon si chijo ka use Kiya gaya h please anyone
Hii . can you pls say the motors names and the equipments used there please
What are the times used? You didn’t put a list in the description .... like where did you get it from??
Which name, that you are using?
Would be a much better project with links to buy materials. Otherwise, not very good.
Please list the names of the electric components...
Lists of tools pls
Material: cardboard
Gear motor
switch
reducer
battery
Tool: hot melt adhesive
Utility knife
Compasses
straightedge
Heat shrinkable tube
wire
@@创趣哥 Thank You very much! ^^
Ummmm can you make one with captions so i have tips
Any link for speed controller?
Can you give the materials?
👍👍🎈🎈😁😁😄😄🎈
Can anyone help me what is the battery range
Can I Do it with Wood
of course you could
Salamat sana all!
tell us the items used
circuit name plz
Please tell all parts name with Amazon link please 🙏 😊
Super!! Thank you !
😀😀Thank you
please tell us the material also
Noice
what type of batterys?
The battery is a standard 18650 rechargable.
What is Motor rpm of this motor??
Bhai sari chizo ka name kia he motor name
What is the motor??
Geared motor
srikanth G thanks and i have made my own rotation display. Thanks
Descreve os eletronicos😊
sPEED CAN be controlled by fan regulator easy available on electric store
Why not buy link..how can buy this kit... 😖😖😖😖😖👎👎👎
"China Tobacco"
what kind of gear motor?
I found the exact one easy on Ebay but what is the "Reducer"?
Here is what the exact motor is called Axcel: Small DC Gear motor 3V-9V 6V Mini Worm Gear Motor Slow Low Speed 9-32RPM DIY Toy (on Ebay)
@@journeystorm8585 (you might be better off with the motor like in microwaves, though, pretty the same function)
@@invii2049 - Isn't this what this gear motor is? Same as the microwave? I did some research for a couple of weeks and found every piece here that he showed with some help from a great guy that has another video but his was not battery operated. Anxious for the items to come in but some things I'm still unsure of. The battery pack I got was I think 1.5 V or something like that and using AA battery. I think that part is wrong and the battery pack needs to be higher V. I guess we'll find out down the road lol
@@invii2049 So where do you get a microwave motor without buying a microwave oven?
Wr to get this materials
Ok i cant make it tks
Circuit diagram please
Motor link amozn link send me
Moter kitna ka hai
Tell us the name of everything you used.....
Otherwise it's useless