TiTs - MJX HYPER GO MT 16208 - Diff repariert + Tuning Y Parts - Buttracer schraubt

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.ย. 2024

ความคิดเห็น • 60

  • @KasyTV
    @KasyTV 9 หลายเดือนก่อน +1

    Cooles Video bin erst seit kurzen in dem Hobby drin habe auch zwei Hyper GO finds cool das man da so viel selber machen kann. Hoffe ich bekomm das auch so gut hin wie du :D Like und Abo lass ich dir da !

    • @buttracerrc
      @buttracerrc  9 หลายเดือนก่อน +1

      Danke 👍
      Klar kriegst du das hin. Langsam rantasten - es ist ja keine Raketenwissenschaft.

    • @KasyTV
      @KasyTV 9 หลายเดือนก่อน +1

      @@buttracerrc Ok super naja bisher hat ich noch keine Reperatur aber das kommt spätestens nächstes Jahr ganz sicher :D

  • @tornadojoe87
    @tornadojoe87 7 หลายเดือนก่อน +1

    I could only understand the parts list in the transcript, but I could tell when you showed the stock 16420 sheared in half "look at this piece of crap, it only lasted an hour before it totally failed, it has no reason to even be here in the first place, no excuse!" 😅 I am happy to finally find a video actually showing the exact same thing that I have had an issue with myself, but I went through 5 of them in less than 2 weeks before I found out about the Y upgrade and I can now go figure out which store/site is the best one to order through for quality assurance since you listed one of the parts I wasn't sure if I needed to get too 👍 Plus the main gear smoothed down half it's teeth as the final farewell lmfao so ill get everything in a single purchase, for 2 DEERC H16R that failed extremely fast. HyperGO platform clone basically I believe, so parts are interchangeable.
    I actually didn't want to wait nor had the money for new parts when it first happened so I literally patched the differential so I could drive it some more later that day or the day after if necessary 😂 It worked for a few minutes and split again, and then I used a better patch : jb weld instead of original gorilla glue like I did the first time 😂 It worked for significantly longer before it split again and then the front diff realized it was on the spot and tapped out too. jb weld x2 overnight and then drove through a few batteries before the free replacement truck arrived and then I ordered stock replacements. that was just a couple weeks back and I have only had the initial truck since January, so thats pretty ridiculous that they've already required a year's worth of maintenance and repairs.. Shitty diecast components chosen to ensure revenue flow long after the sale, like a mechanic replacing the same broken part with one just like it guaranteed to break in no time

    • @buttracerrc
      @buttracerrc  7 หลายเดือนก่อน

      Should Work with the parts. As Long AS IT looks Like the MJX Chassis and parts. I buy everything on AliExpress. They have sets in some Dealer sites with the even better "G" parts. 2diffs, Input Gears plus Spur Gear for about 28€.

    • @buttracerrc
      @buttracerrc  7 หลายเดือนก่อน

      Ich habe gerade diesen erstaunlichen Artikel auf AliExpress gefunden. Probiere ihn aus!
      7,29€ | Mjx hyper go ersatzteile 1/16 bürstenlose rc autos offroad lkw buggy ersatzteile für 16208 16209 16210 upgrade teile
      a.aliexpress.com/_EzOKhnx

    • @buttracerrc
      @buttracerrc  7 หลายเดือนก่อน

      Link one comment up, there i ordered the "Upgrade diff Set"

    • @tornadojoe87
      @tornadojoe87 7 หลายเดือนก่อน

      ​@@buttracerrcIt uses the 16400 main driving set which includes the 402, 404, 405, the 16420, and then a 16392B on the motor. The H16R from DEERC at least comes with a nearly complete assembly instructions for each little piece of the entire thing and also the part numbers for everything. it just doesn't include the big detail of what to use to maintain or rebuild components to keep them in top shape, like lubricants/grease/oil for example. Just shows how to assemble everything from scratch

  • @arq.andresfelipemoralesvar9593
    @arq.andresfelipemoralesvar9593 11 หลายเดือนก่อน +1

    Hey this is a great video! Could not understand the listening but the images were so clear. I wanted to ask if the diffs problems are common in this car? I got mine 5 days ago and is very funny. Finally, is that diff the stock or the improved one? Thanks a lot man. I subscribed to your channel :D

    • @buttracerrc
      @buttracerrc  11 หลายเดือนก่อน +2

      Hey, thanks for watching.
      The Pic at 1:30 is Stock Gears in the 16xxx Cars. The Pic at 1:42 IS the build in Y Parts. I Hope that is, what you want to know.
      By the way: Stock is die cast Zinc-Alloy Gears. Y Parts are sintered Steel Gears and the G Parts (from the 14xxx) are hardend Steel Gears. The geometry IS the Same. But the Pinion is in two Sizes available.

    • @arq.andresfelipemoralesvar9593
      @arq.andresfelipemoralesvar9593 11 หลายเดือนก่อน +1

      @@buttracerrc thank you so much for your answer! Means a lot to me. And appreciate the clarification on stock, “Y” and “G” parts, I’ll order the strongest for my car just in case :D

  • @keldonator
    @keldonator ปีที่แล้ว +2

    No idea what you were saying, but some good video of the insides lol

    • @buttracerrc
      @buttracerrc  ปีที่แล้ว +1

      Thanks Buddy. Just talking about the mechanic and puttin the new Gears in. And that the Diff Screws were broken.

  • @anisghil
    @anisghil 5 หลายเดือนก่อน +2

    Hi, do you think the pinion gear has to be upgraded with the G version? Does it break often ? Thx

    • @buttracerrc
      @buttracerrc  5 หลายเดือนก่อน +1

      Hi. I have never Changed a pinion Gear in all my 4 MJX Cars. Till now no issues at the pinions. I belive they have a better Stock Material than the diffs.

  • @michelebuttafuoco7879
    @michelebuttafuoco7879 5 หลายเดือนก่อน +1

    Moin! Folgende Fragen hätte ich...
    Bist du auf 2S oder auf 3S gefahren um den Schaden zu verursachen?
    Und ist das Problem gelöst mit den Y-Teilen oder fetzen die durch oder gar was anderes?
    Gruß Michele

    • @buttracerrc
      @buttracerrc  5 หลายเดือนก่อน

      Moin Moin. Bin auf 3s bei dem Schaden gefahren glaube ich. Bin die ersten 20 Akkus 2s, danach nur noch 3s am fahren.
      Die Y Diffs helfen enorm. Hab die jetzt in 3 Autos schon eingebaut.
      Aber auch die werden irgendwann inne Dutten gehen, da der Wagen keine Slipper Clutch hat.
      Gruß vom hübschem Buttracer 😚

  • @ckochi
    @ckochi 2 หลายเดือนก่อน +1

    Witzig, das Hauptzahnrad war bei mir nach dem 2. Run hin. Und das ALLE 4 Schrauben, des hinteren Diffs gebrochen sind, habe ich jetzt nach dem ca. 10 Run auch... schade eigentlich...

    • @buttracerrc
      @buttracerrc  2 หลายเดือนก่อน

      @@ckochi HZ hatte ich noch keins defekt. Mit den diff Schrauben schon oft gehört/gesehen. Konstruktiver Schwachpunkt ist die fehlende Rutschkupplung. Geht halt immer voll auf den Antriebsstrang wenn man unter Last landet oder bei Widerstand weiter Gas gibt.

  • @mattferrell90
    @mattferrell90 ปีที่แล้ว +2

    so all the parts dropped in to your truck with no issues? it looks like you had to use the stock pinion gear for the motor and didnt use the one in the bag part number 14392 im about to build one of these trucks and i want to make sure i upgrade the drive train with the right parts the first time thanks for your time.

    • @buttracerrc
      @buttracerrc  ปีที่แล้ว +1

      Yes. Exactly as you Said. Diffs are changeable 1:1. Spur with diff Input Gear must be Changed complete - but IT IS everything in the Bag. Intput Gear Front 1:1 Change.
      Only the Pinion you dont (can't) need, because it is too Big. The Pinion is only for the infraction Style Car. The Motor hast No Slider.

  • @michelebuttafuoco7879
    @michelebuttafuoco7879 5 หลายเดือนก่อน +1

    Hi, mal was anderes...an der Karo hinten der Bügel der hält keinen ganz Tag (bei backflipen muss man dazu sagen). Hat du oder jemand eine Lösung oder Idee wie man das in Griff bekommen kann?!

    • @buttracerrc
      @buttracerrc  5 หลายเดือนก่อน

      Den bügel gibt es aus Alu bei AliExpress. Alternativ Mal bei thingiverse gucken ob schon einer eine 3d Druck Lösung hat.
      Ich hab mir damals einen neuen Karo für 12€ geholt, seit dem hält der Bügel an der neuen Karo.

  • @ChrisH-cx3cc
    @ChrisH-cx3cc 5 หลายเดือนก่อน +1

    Hallo Buttracer,
    ich hab jetzt auch bei einem Hyper Go 1/16 gebrochene Schrauben am Differential. Was hast du unternommen, damit das selbe nicht wieder passiert? Andere Schrauben? Hast du beim Hersteller reklamiert?
    LG, Chris

    • @buttracerrc
      @buttracerrc  5 หลายเดือนก่อน

      Hallo Chris, ich hab mir Y Diffs bei Ali bestellt. Die habe ich eingebaut. Das ist im Video zu sehen. Die Y diffs halten bis jetzt, ich denke da sind bessere Schrauben drin als in den Stock Diffs.
      Andere schrauben könnte man nehmen, aber musst ja bei den alten diffs erstmal die Schrauben Stumpen raus bekommen. Bei nem 6€ diff lohnt der Aufwand nicht.
      Hab meine MJX von AliExpress alle, da pfeiff ich auf Garantie. Wenn du einen Amewii gelabelten hast aus Deutschland, würde ich die Gewährleistung in Anspruch nehmen.
      Gruß Buttracer

    • @ChrisH-cx3cc
      @ChrisH-cx3cc 5 หลายเดือนก่อน

      @@buttracerrc Hallo Buttracer, ganz herzlichen Dank für deine Infos. Überlege, ob ich ebenfalls auf Y Diffs umbaue. Mal sehen, was Amewii zum Thema zu sagen hat.
      LG, Chris

    • @buttracerrc
      @buttracerrc  5 หลายเดือนก่อน

      @@ChrisH-cx3cc das Problem hat fast jede Stock hyper Go. Würde mich wundern wenn sie was ausflüchtendes schreiben.

  • @eriksteckelbruck7586
    @eriksteckelbruck7586 5 หลายเดือนก่อน +1

    Haben Sie eine empfehlung fur differential grease fur diesen 4WD Hyper GO's ?

    • @buttracerrc
      @buttracerrc  5 หลายเดือนก่อน

      Einfach gut haftendes fett was nicht schnell abschleudert. Von Tamiya gibt es da spezielle fette.zum Beispiel. Ich habe davon eins, ceragrease und eins von Arrowmax. Aber andere Marken haben sicher auch gute Fette.

  • @DARKRAVERac
    @DARKRAVERac 2 หลายเดือนก่อน +1

    Mahlzeit ne frage wie hast du die 3s lipos befestigt 😊

    • @buttracerrc
      @buttracerrc  2 หลายเดือนก่อน

      @@DARKRAVERac hallo. Ich hab nen quer Klett Straps montiert. Hab es in diesem Video erklärt:
      th-cam.com/video/zYor60Ye7i4/w-d-xo.htmlsi=Wd0EK6tSsidvj8Bs

  • @rush338
    @rush338 8 หลายเดือนก่อน +1

    I managed to put this gear in my MJX 16210

  • @DARKRAVERac
    @DARKRAVERac 2 หลายเดือนก่อน +1

    Mein diff hat genau 1 mal 3s gehalten 😊

    • @buttracerrc
      @buttracerrc  2 หลายเดือนก่อน

      Bissl mehr Glück hatte ich schon. Denke so 5 Akkus hab ich geschafft beim MT. Aber die Y diffs halten bis jetzt zum Glück.

    • @DARKRAVERac
      @DARKRAVERac 2 หลายเดือนก่อน +1

      @@buttracerrc was denkst du wieviel akkus hast du ca durch mit den neuen Diffs

    • @buttracerrc
      @buttracerrc  2 หลายเดือนก่อน

      @@DARKRAVERac schwer zu sagen. Denke so 50 Akkus bestimmt. Den MT MJX und den 16207 Buggy, die beiden fahre ich am meisten.

    • @DARKRAVERac
      @DARKRAVERac 2 หลายเดือนก่อน +1

      @@buttracerrc ah ok klingt ja vielversprechend. Weiß natürlich nicht ob eventuell der triebling kaputt ist . Fand es sehr kurios das es kaputt geht bin nur Schotter gefahren nicht mal gesprungen

    • @buttracerrc
      @buttracerrc  2 หลายเดือนก่อน +1

      @@DARKRAVERac wenn dann diff und Triebling wechseln. Wenn hinten auch HZ, weil das vom verbau leicht anders ist als bei den Alu Zahnrädern. Oft brechen die diff schrauben. Mal hat man kein Glück, mal hat man Pech 😅

  • @user-lf8pd2ld2u
    @user-lf8pd2ld2u ปีที่แล้ว +1

    wo bekommt man denn die Y Teile her? Gibt es da irgendwo ne Liste welche Nummern man braucht? Gruss Jens

    • @buttracerrc
      @buttracerrc  ปีที่แล้ว

      In dem Video sind ja die Nummern zu sehen. Man braucht alles bis auf das Ritzel.
      Ich hab die Teile bei AliExpress bestellt. Einfach mal MJX Hyper Go Parts eingeben.

    • @anisghil
      @anisghil 10 หลายเดือนก่อน +1

      ​@@buttracerrchello, which part is unneessary ?

    • @buttracerrc
      @buttracerrc  10 หลายเดือนก่อน +1

      @@anisghil the Pinion.

    • @anisghil
      @anisghil 10 หลายเดือนก่อน

      @@buttracerrc 16402Y or 16392G please ?

    • @buttracerrc
      @buttracerrc  10 หลายเดือนก่อน +1

      @@anisghil 14392 is Not needed.

  • @muelsenagrar
    @muelsenagrar 7 หลายเดือนก่อน +1

    Kannst du mir sagen welches diff öl da stock drin ist???

    • @buttracerrc
      @buttracerrc  7 หลายเดือนก่อน

      Kommt aufs Modell an. Steht in der Anleitung. Bei den Nachkauf Y Diffs weiß ich es nicht. Fühlt sich mittel an. Hatte kein Bock es auf zu machen.

    • @muelsenagrar
      @muelsenagrar 7 หลายเดือนก่อน

      @@buttracerrc steht eben leider nix in der Anleitung...fahre einen 16208

    • @buttracerrc
      @buttracerrc  7 หลายเดือนก่อน

      @@muelsenagrar da ist Fett drin. Die Diffs ohne Buchstaben mit Zink Alu Zahnrädern und dem weißen Gehäuse haben keine Dichtung. Bin mir zu 75% sicher 😅

    • @muelsenagrar
      @muelsenagrar 7 หลายเดือนก่อน

      @@buttracerrc aha...wie bist du mit dem quicrun 16bl30 regler zufrieden???

    • @buttracerrc
      @buttracerrc  7 หลายเดือนก่อน

      @@muelsenagrar zufrieden. Viel weicher vom ansprechen und programmierbar 👍

  • @altgenugman
    @altgenugman ปีที่แล้ว +1

    Hi ... Wo hast Du deine Ersatzteile bestellt?

    • @buttracerrc
      @buttracerrc  ปีที่แล้ว +2

      Hi. Bei AliExpress. Brauchst 16401Y, 16402Y und 2x das diff. Gibt ja so verschiedene Shops bei Ali. Guck Mal nach Lieferzeiten. Bei einem oder 2 Shops gibt's das diff gleich im 2er Pack für 22€ oder so.
      Ich verwende bewusst keine Links, Werbung machen direkt ist mir zu doof.

    • @altgenugman
      @altgenugman ปีที่แล้ว +1

      @@buttracerrc Danke 👍🏼